At the end of 70s and the beginning of 80s, 18 terminals was built and used for chipping wood residue from clear cuttings. Most of the terminals was terminated before the 2000s but with the high oil- and energy prices that we can see today there might be a place for these terminals again. The goal with the study was to analyze and compare economical differences between 5 different logistical systems, collected data was used with a set of formulas. The systems include long range transport of slash, chips and bundles. Three of the systems include transport by lorry to industry the last two includes a terminal with access to train transport.

Tidigare ombesörjde organisationen karriär och karriärutveckling för den anställde och karriärkontraktet byggde på livslånga anställningar. Det nya karriärkontraktet bygger istället på en så kallad proteisk karriär (Hall, 1996), vilket utmärks av att individen ser sig själv som ansvarig för och drivande av sin karriär, att egna värderingar får styra samt att psykologisk utveckling är främsta mål. Studiens frågeställning var att undersöka om personlighetsfaktorer i termer av self-efficacy, självkänsla, locus of control samt neuroticism kan predicera proteiska karriärattityder. I studien användes kvantitativ metod och en enkätundersökning genomfördes på studenter. Korrelationsberäkningar visade att samliga personlighetsfaktorer samt proteiska karriärattityder var korrelerade.

An automatic control system for calibration of pressure indicators has been constructed. This control system can be used as a complement to the calibration system located at AerotechTelub, division MainPartner, in Linköping. The calibration system used today contains some not wanted pressure changes, which is compensated by hand today. The new system presented in this report automates the calibrating process and simplifies the calibration. Suitable hardware as motor, controls card and so on have been found and software in the form of Visual Basic program has been developed.

This study investigated how banner ads, depending on its quality and placement,can capture a user's attention while searching for editorial content in an online newspaper. Furthermore, the user's search strategy was also studied to see whether it varied depending on the placement of an ad. An experiment was conducted where 20 subjects searched for articles in a Swedish online newspaper while their eye ovement was recorded with a headmounted eye?tracker. In each search task the online newspaper contained either a low quality ad or a high quality ad.

This report presents a master thesis project performed at Elekta AB during the fall of 2013 and early 2014. Elekta is a medical technology company and their main product in the Stockholm office is a gamma knife used for radiosurgery. The gamma knife contains a cluster of a dozen motor servos and motors used for adjusting the patient and the radiation sources over a CAN bus. A self-developed hardware-in-loop simulator running on a PC with LabVIEW is currently being used for integration level testing of the control system of the gamma knife. The simulator has some problems with it not running in real-time and having other performance issues.

In this project we have used the theory of analytical mechanics to derive equations of motion for complex mechanical systems in order to study their behaviour over time. Even if the theory provides powerful tools to tackle tough problems which would be very hard to solve by methods of Newtonian mechanics, you are still relatively limited without running any computer simulations. One realises that in a faster rate it will be an incredibly difficult task to find an analytical solution when the degrees of freedom increases. Even if one would succeed to derive the equations, one still has to solve them to get the information of the systems behavior. Of experience one knows that the equations in general are nonlinear and hence must be integrated numericaly.

Denna rapport handlar om utveckling av ett undervisningsmaterial för elever på fordonsprogrammet inom området elektroniska styrsystem. Rapporten beskriver processen från idé fram till färdigt undervisningsmaterial. Detta har tagits fram för att ge eleverna en bredare, mer generell kunskap inom detta ämnesområde än vad som är möjligt att få genom enbart teoretisk undervisning kring utvalda märkesspecifika system.  Undervisningsmaterialet bygger på teoretiska avsnitt som varvas med praktiska övningar kring en mikrokontroller med tillhörande sensorer och aktuatorer. Genom att skapa korta styrprogram som hanterar dessa sensorer kan olika funktioner skapas med hjälp av mikrokontrollen. Detta gör att många av de delfunktioner som används inom fordonselektroniska styrsystem kan simuleras..

This study focuses on the internal marketing and how it affects the complaints by companies? communication control. Our purpose with this subject is to increase the understanding of which components affects the relation between internal marketing, communication control and complaints. We have chosen the subject, internal marketing because it caught our interest in an earlier course. On the basis of the literature of costumer complaint there have not been so much research about it and that is why we have chosen this perspective on internal marketing.This study is based on a qualitative approach.

A new site- and construction-law came into effect in May 2011. The new law, PBL2010:900 implies several different changes of the law. These changes concern bothconstructors, people working in municipality and county councils and other peoplethat in some way are related to the building sector. Except from the change in orderof the chapters and the renewed and modernized language, the law has now beenextended with a few new phases.According to the new law a certificate has to be issued to start and finish theconstruction; the construction consulting has changed name into technical consultingand the protocol for the controls has to show what the control is being compared to.This diploma work concerns control visits on construction sites as related to the newlaw. The reason why visits on construction sites are now implemented in the law isbecause the government saw a lack of trustworthiness in the old law.

This master thesis describes the development of an UPS module. UPS is an acronym for Uninterruptable Power Supply. The UPS module has been developed at the company AerotechTelub AB. The UPS module delivers the necessary voltage and current in case of a power interrupt. If a power interrupt occur, the computer system has one to three minutes available to store data and shut down correctly.

In this report a study has been done regarding different heating systems on which are the mostcomprehensive with solar heating systems. The report has also been focusing if solar power can beused as a primary heating source for supplying more than 50 % of the buildings total heatingproduction. The University of Dalarna constructed a demo-house for this purpose and according tocalculations the total solar usage is more than 50 %. This house has been made for referenceregarding the design of the heating system of property 5:37.Further studies have been made to compare different heating systems that are compatible with asolar system, where the compared systems purpose is to be independent of direct using electricity. Asystem of this design is regarded as sustainable according to environmental as economic issues.

Handling materials and packaging, which is the focus of this study, requires efficient logistics, both internally and between companies. To achieve an efficient material flow, good information systems, whose role is to collect, store, process and distribute information, are required. The assumption that packagings are handled in an efficient manner is currently not a matter of course, when many companies do not prioritize the internal management of the package.The purpose of this report was to investigate how medium-sized businesses working with distribution and handling of spare parts packaging can improve their internal management of packaging. In order to answer the purpose, we have used an abductive process and a qualitative data collection. The study had Logistic Center Ljungby (LCL) at Electrolux Laundry Systems (ELS) as a case company and two other respondents, Nibe in Markaryd and Enertech in Ljungby.

This thesis examines history of the subject of mechatronics and innovation. The main reason tostudy mechatronics from a historical point of view is that it has never been done to a greater extent before. An overview is justified because various definitions have been used over the decades, but nowadays the subject has become more established. Focus in this thesis is mainly on development of the subject of mechatronics at Royal Institute of Technology in Stockholm. Innovation is the other aspect of this thesis.

Finnhamn is a small group of islands in the Stockholm archipelago. At Stora Jolpan, the biggest island, there is a hostel. The main building was built in 1915 and is called Utsikten. The purpose of this project is to on behalf of the Archipelago Foundation (Skärgårdsstiftelsen) find alternative systems that can replace the existing heating system of Utsikten (an oil-fired boiler and electricity heaters) to a system with renewable energy. The alternative system that this project focuses on is a system of solar collectors combined with a wood chip boiler.

The purpose of this study was to examine leadership in the public sector based on leadership models, organizational factors, conditions and health of employees. The study was divided into sub-study one and two. In sub-study one the design was an observational study using cross sectional design in which 67 first line managers in the public sector answered a survey about conditions and leadership models. Sub-study two was an observational study using case-control design focusing on a health promoting leadership intervention in the municipal sector. Two semi-structured interviews and 41 surveys were collected.