The aim of this report is to increase the knowledge and understanding of the problems within the production at AQ Enclosure systems, and thereby achieve a more stable flow throughout the whole process, a better working environment and better competition advantages. The internal flow along with the external cooperation is very important for the company, because it views flexibility and short leadtime as it is the most important competitive means. The part of AQ production that?s been investigated is the manufacturing of ATM-machines, where the costumer is Banqit. This company is a rater small company with about 4 % of the world market of ATM-machines.In order to achieve the aim of the report extensive interviews have been carried out with employees at AQ.

In recent centuries the Swedish Tiled Stove has varied in its design with an aesthetic evolutionary history that has not only followed the architectural and artistic ideals but also the taste in stove design. The heat source has varied depending on the regional traditions and where it was located within the country, but the inside of the construction was of a similar five channel system. The purpose of this paper is to study and compare the design of tile matrices made by Emil Petterson with other Swedish stoves. The following questions will be addressed:What characterized the production of a small scale tile stove workroom during the years 1900-50? Which main styles can be described as Emil Pettersson?s ideal while producing his matrices? And finally, is it possible to study the tile stove matrices as objects of historical and cultural significance, and what difficult methodological issues might occur in the doing of it? To answer these questions I will present the results of the documentation of Pettersson?s tile matrices with detailed historical categorizations and schedules. The conclusion shows that Pettersson as a stove builder and -producer was characterized by eclectic ideals and a design shape based on more liberal interpretations of contemporary trends.

The Rya power plant in Borås produces district heating, district cooling and electricity. The plant is owned by Borås Energi och Miljö AB and is run by Dalkia Facility Management AB.In order to get the best heat exchange from the district hot water a pair of twin pumps and a turbine circuit pump are used as return pumps. Turbine circuit pumps are used to increase the pressure through the heat exchangers at the power plant. The pumps are in use when the flow is over 2 000 m3 h-1 and during the summer when re-cooling is used to improve the effectivens of the heat boilers.Since the pumps, that are parallel connected, rotating at a fixed rate per minute, the pressure is regulated with regulating valves. This report shows that during the 4,300 hours that the pumps where in use, energy corresponding to 590 MWh was wasted.

In health care today at Uppsala County Council the daily work involves spending time at the computer. IT-systems were implemented to support and aid the care givers in their work. Around these systems there is a support organization to support the users in using the system. The aim of this thesis is to investigate this organization in terms of how well it works and how successful it is in helping the users. This has been done by investigating the flow of information trough the organization and by focusing at the role of IT-coordinators with responsibility for support, process development, education and statistics.

The globalization that has occurred during the last few years has made it more important for companies to have a well-functioning logistics system. Customers demand more options, which lead to an increased flow that creates greater demand regarding packaging and transports. Diverse logistics costs are nowadays a substantial cost for many companies. Therefore, more effort is aimed at optimizing transportation to lower these costs.The purpose of this project is to create a user-friendly calculation of logistics costs that illustrates how the costs vary, depending on how the flow is structured. This is done by examining which aspects that affect the total logistics costs and by mapping which aspects that should be included in a calculation of the logistics costs.Literature studies have been carried out parallel with empirical studies at Scania's production unit, MC, in Oskarshamn.

During the Swedish banking crisis in the early 1990?s, the government paid out 65 billion Swedish kronor to save Swedish banks from bankruptcy. In the process, two banks left the private sector to be taken over by the state. This thesis builds on a study from 1998 in seeking to quantify the financial end result for the Swedish government from the subsidies. Taking a cash flow approach and accounting for the time difference, it starts with the money paid out during the years of crisis and subtracts the money that has since been returned to the government by successful management of the relinquished assets.

The main focus for this essay is to describe the relationship between human and nature through a material investigation that takes its shape through sculpture. With the help of a fairytale-like story the reader can share the creation of the sculpture and how my thoughts flow through the process that will result in an exam project. Rooted in earlier projects I discuss the crash between civilization and the wilderness as well as talking about the likeness of the creative process and child play. I also discuss the body's place in the forest and the loneliness that we humans created that has cut us off from the rest of the creatures and plants in the forest. My aim is that in the final piece I will create a fiction place where these can be joined together again.

Valmets own foundry in Karlstad has during a long period of time had problems being profitable. The goal today is to turn this around. Today there are three different productionlines; engine blocks, Yankeecylinders and components for the wind turbine industry. This master thesis has focused on examining if value stream mapping is a useful tool to use in a foundry, and therefore outside the typical manufacturing industry. The target has also been to evaluate if there is a possibility to improve the flow in the foundry and also the results.During the 20 weeks this work has been done at the foundry data has been collected and analyzed.

Syftet med det här arbetet har varit att välja ut och integrera en lämplig fysikmotor med öppen källkod i simuleringsprogramvaran EWSim på Totalförsvarets Forskningsinstitut (FOI). EWSim är ett ramverk för duellsimulering i olika telekrigsscenarier. Teorin bakom fysikmotorer och några vanliga tekniker för fysiksimulering har beskrivits kortfattat. Tre fysikmotorer har presenterats och utvärderats med avseende på lämplighet för integrering i EWSim.Fysikmotorn Bullet valdes ut och integrerades i simuleringsprogramvaran. En av de huvudsakliga slutsatserna av arbetet är att fysikmotorer som Bullet mest kan bidra med ökad visuell realism i EWSim.

Today there is no way of measuring or simulating turbulent flow in high Reynolds numberenvironments. The computational power required to simulate these conditions is not expectedto be available for several decades so instead the CICLoPE project aims at solving thisshortage by the construction of a long carbon fiber wind tunnel in which real measurementscan be made. To do accurate measurements it is of importance that the wind tunnel, 0.9 metersin diameter and 110 meters long, is as straight as possible.This master thesis treat the design and construction of a device which may be used to align thetunnel along a reference laser beam. A design is presented which allows the pipe to be alignedwithin about a quarter of a millimeter along its entire length. Contents span over severalscience fields such as physics, mechanics, control theory and electronics.The result is a theoretically correct design.

Motivation inom matematikämnet anses av många forskare vara betydelsefullt för kunskapsutvecklingen. Syftet med denna studie var att undersöka hur några lärare i årskurs 1-3 arbetar för att motivera elever som upplever matematiken svår eller ointressant. Datainsamlingen skedde genom fyra intervjuer med verksamma lärare som representerade fyra skolor i två kommuner. De flesta av de intervjuade lärarna menar på att de själva har en väldigt viktig roll i klassrummet för att eleverna ska känna sig motiverade, och att undervisningen bör vara varierad. Ur lärarintervjuerna framkom det dock att ointresse för matematik är mycket ovanligt i grundskolans tidigare årskurser men att arbetet med att motivera elever som finner matematiken svår är ständigt pågående..

The first of May 2005 changes were made in the Annual Accounts Act. The 2006 Annual Report of companies with more than ten employees or assets over 24 million SEK must include environmental information in the directors' report if it affects the company's development, result or position. A survey made by KPMG 2007 investigating the environmental information of companies listed on Large Cap Segment of the OMX Stockholm exchange showed that only a third of the companies, included in the survey, complied with the new law requirements. I have examined how the environmental information in the directors' report is formulated and why the information is formulated in that fashion. I have examined seven companies listed on the Large Cap Segment of the OMX Stockholm exchange. Four companies from the materials sector and three banks from the financials sector were included in the survey.

The mining industry, in terms of ore excavation and metal production, is and has been important to the Swedish economy. In connection with the ore excavation process, large amounts of partly sulphidic waste are produced. When the metal sulphides are exposed to air and water they are eventually oxidised, which leads to the formation of acidic water with high concentrations of metal cations and sulphate ions, so called Acid Mine Drainage (AMD). This water may reach the nearest surroundings and cause negative environmental effects. By covering the waste with soil or water, the oxidation process can be minimised. At the Rävlidmyran mine in the county of Västerbotten open pit mining took place between 1951 and 1991.

PurposeThe purpose of this thesis is to provide a deeper understanding of how e-commercecompanies within the fashion industry are working with lead times and illustrate andanalyse differences and similarities between companies.Research question- In which ways are e-commerce companies within the fashion industry working withshort lead times?MethodologyThis thesis is based on a qualitative research method in order to achieve a greaterunderstanding of the chosen topic, of how the chosen companies are operating and toprovide room to our own interpretations and reflections. Interviews through telephonewere used to gather the empirical data from six different e-commerce companies withinthe fashion industry.ConclusionsAfter completing the theoretical and empirical analysis it can be concluded that leadtimes are considered essential for all of the participating companies but there is adifference in which way they look at, and how they work with lead times. Somecompanies stressed that short lead times are an important aspect of competition andclaimed that this is something they are constantly working with. For others the balanceand matching of supply and demand was the most important factor rather than toachieve short lead times.

This study investigates the teaching strategies of four teachers, and determines which teaching strategies give better results in mathematics at the middle school level? Result here means the knowledge level of the students. The result has been measured through leave out a mathematical test, which I leave out designed. Teaching strategies have been assessed through interviews with teachers and observations of their lessons.My study shows that to go through the lessons thoroughly in the traditional way, and open discussions with the whole class are best for students achievements.The information available, however, is too limited to draw some general conclusions, but my study can be seen more like a counter-example to the general praxis that is short lectures and individual assessment with one to one communication when teaching mathematics..