Sök:

Sökresultat:

2505 Uppsatser om Open channel flow - Sida 30 av 167

Anhörigas uppfattning om vården på en hospiceavdelning : En kvantitativ studie

Aim: The aim of this study was to investigate relatives opinions of information, interaction, support, participation and care at a hospice unit. The aim was also to investigate whether there was a difference between women and men.Method: The study is a descriptive quantitative cross-sectional study. A questionnaire with closed and open-end questions was sent out to 66 relatives to patients who had died at the hospice unit. The closed questions were analyzed with SPSS. A content analyze was used for the open-end questions.Results: The most of the relatives were fully pleased with information, interaction, support and care.

Styrd borrning eller konventionell schaktning : en jämförelse av två rörläggningsmetoder

This is a diploma thesis executed as a part of the examination of the educationalprogram Building engineer ? Construction management at Halmstad University. The aim of the thesis is to compare and evaluate conventional open-cut pipe-laying withhorizontal directional drilling. The thesis includes a comparison of the economic,environmental and time-based aspects of both methods and discusses which factorsthat determine the optimal choice of method.The study is mainly based on previous studies regarding the subject and oninterviews with professionals from the industry.A fictional project with five realistic cases of pipe-laying scenarios was compiled,sent to different companies for calculation, evaluated and compared. Our conclusionregarding when it?s suitable to use which method is entirely dependent on thespecific project.

Läslust en brinnande känsla i magen. En studie av 9 - 12-åringars upplevelser och uppfattningar av läslust.

The aim of this Masters thesis is to investigate the factors that contribute to childrens feelings of enjoyment and wellbeing while reading pleasure reading. The research is founded on qualitative interviews with eight children aged between 9 and 12 years. In the review of the literature different theories of reading experiences are examined and the theory of flow is used to analyse and interpret childrens statements of reading experiences. The theory of flow has not been developed to investigate reading but aims to describe and explain when and how people experience happiness and joy. The results of this study reveal that many different factors influence childrens reading.

Vägar till egen försörjning: en fallstudie av ett aktiveringsprojekt

The aim of this thesis was to examine how a coordinator at a social welfare project in support of job seekers, achieve results in his efforts to reduce the number of clients with social assistance. The method of data collection was a mixture of open thematic interviews and semi- structured interviews with open questions. The coordinator was interviewed four times during the length of the project. In addition, two of his clients were interviewed. The data also includes a report from the relevant social services and other documents such as newspaper articles.

Klämtar klockan för Klippans kommun? En studie i rasism och antirasism

The subject of the essay is about a society called Klippan and the existing conflicts there between an active racist group and some youths with foreign heritage. The essay also concerns issues like racism, its effects and how it is expressed at different levels in a society. Futhermore we discuss how a community can prevent 'subtle' racism and open declared racism and how to work in a racist manner. We also talk about which role the immigrant youths play in the conflicts and how their behaviour can be understood. Another perspective that is discussed is which aspects can affect individuals to join an active racist group and which factors can make them leave such a group.

Torkat bioavfall som jordförbättringsmedel

The main project Dry preservation of source-separated organic household wastes involves a new technique for treatment of biowaste through drying. Investigations are going on to determine how the dried biowaste best can be used to close the natural circular flow of nutrients. The objective of this degree project is to determine if the dried biowaste can be used as a soil conditioner. By restoring the nutrients in the material to the ground, the natural circular flow is closed. A declaration of contents, including the nutrient levels, C/N ratio, pH and the electrical conductivity of the dried biowaste, was constructed and a germination test was done to make sure that the material did not inhibit sprouting.

Besparingar inom Barn- och utbildningsnämnden : en jämförande studie mellan Landskrona och Kristianstad kommun

Title: Besparingar inom Barn- och utbildningsnämnden.Seminar date: 29th of May 2009Course: Degree thesis in Business Administration, bachelor thesisAuthors: Amela Smajlovic and Sten SundfeltAdvisor: Leif HolmbergPurpose: Our purpose is to explain the cost-saving process that many municipality organisations face because of the global financial crisis.Limitations: We have limited our study to the municipality of Landskrona and Kristianstad.Method: Our study has a qualitative approach. By using open interviews we have been able to get an open dialog with our respondents.Theory: We have compared with different theories, such as Rombach?s budget-theory and Wildavsky?s role theory.Empirics: The material is based on interviews and conversations with key figures in different levels of the organisations in Landskrona and Kristianstad.Conclusions: The success of a cost-saving process depends on the engagement, awareness and how inclined to changes the persons in the organisations are. Has everybody the willingness to take responsibility fore the organisation and the changes that the surrounding world claims?.

Värdeflödesanalys på Saab Training Systems i Huskvarna

Saab Training Systems (STS) in Huskvarna is manufacturing material for educationalpurposes to armies worldwide. They are now implementing parts of the Lean productionconcept in their organisation.One part of the work with Lean production is to eliminate waste. To be able to identify waste,value stream mapping is a good tool and also what we used in our thesis. To gain a betterefficiency in the production of Personnel Detector Device (PDD) flow was one of our goals.The PDD is a harness used during battle training which registers if the user is being hit by itsenemy.Our work with the thesis started up with a short education in Lean production and in valuestream mapping (VSM). The work proceeded with a VSM of the production flow of the PDD,interviews were made and studies of literature were done to gain greater knowledge of thesubject and solve the task.The VSM resulted in five areas which were followed up out of those six we identified.

Bloggar som marknadsföringskanal ? En kartläggning av Lindex AB

It?s a fact that fashion companies today are searching for new ways to win consumers.Traditional marketing methods have been replaced with new marketing techniques onInternet. Fashion blogs have a high traffic and because of that they are relevant in themarketing context. Lindex has developed from being a store of underwear to be oneof the largest fashion companies in Sweden with Internet sales which actively workswith bloggers through it?s website.Our purpose in this study is to analyze and describe how a fashion company as Lindexis practical using blogs as a marketing method.

Design av flödesorienterad montagecell : Utvärdering av layout och materialförsörjning vid Emhart Glass AB

Emhart Glass is the world?s leading manufacturer of equipment, controls and components to the glass container industry. The goal of this project has been to identify improvements and propose cost saving solutions when moving one of Emhart Glass work cells in Sundsvall. The changes shall result in improved work environment and increased product quality. The method contains value stream mapping, concept selection and P-FMEA and complies with Emhart Glass goal to become a more Lean focused business.

API:er i den offentliga sektorn : Öppenhet och datatillgänglighet enligt offentlighetsprincipen och PSI-direktivet

Sverige har länge haft en god kultur av öppenhet i den offentliga sektorn tack vareoffentlighetsprincipen. Men med allt större tekniska framsteg och ökade krav på datatillgängligheträcker den klassiska öppenheten inte längre till. Det finns redan mycket intressant offentlig data iSverige, men i de flesta fall är den antingen sparad i format som är svåra att avläsa digitalt eller fördyr att använda.I denna uppsats undersöks hur ett API kan utvecklas, användas och integreras med andra API:er föratt öppna upp ovan nämnda data på ett bättre sätt och göra den mer tillgänglig för potentiellaanvändare. Vidare undersöks också PSI-direktivets egentliga nytta och hur det tillsammans medoffentlighetsprincipen kan bidra till den nya öppenheten. Med koppling till denna uppsats har ävenen prototyp utvecklats för att ge exempel på hur man kan kombinera olika API:er för att visualiserageografisk data samt hur ett API kan byggas ovanpå visualiseringen för att göra denna data mertillgänglig..

En studie om kunskapso?verfo?ring vid o?ppen innovation genom crowdsourcing

Organizations that want to maintain a good innovation capability can seek knowledge both within and outside its boundaries. Opening up innovation processes, through so-called open innovation, allows organizations to combine internal and external knowledge sources in order to include previously excluded perspectives to the innovation process. This study examines how knowledge is created and transferred when conducting open innovation through crowdsourcing. It is done based on Nonaka?s (1991; 1994) theory of how knowledge is created through conversion processes, where implicit knowledge can be converted into explicit knowledge and vice versa.

Beräkning av värmeförluster och energieffektivisering av elbussar

The ?civilized? world is in need of fossil fuel in order to function. Hybricon AB is a company in Umeå that is developing a technology that hopefully can reduce parts of this need. They are currently testing their two electrical busses (with Hybrid backup) in city traffic on the roads of Umeå in cooperation with the county of Umeå.                               The busses are originally diesel-busses, but the diesel motor has been replaced with two electrical hub-motors with a power of 145 kW each that are powered by batteries.The batteries are charged at the end station after each route. In case the batteries should run low on capacity during driving, they can be recharged by the so called genset.

Potential för energiklippdrivare i Skåne : markägarintresse, råvarutillgång & ekonomi

As the Swedish governments long term goals include a reduction of fossil fuel dependency, increasing pressure is placed upon energy companies to create and develop new solutions for renewable energy. The following case study was done in collaboration with the company Sydved Energileveranser AB and one of their contractors, Enarssons Skogsentreprenad AB. The objective of the study is to examine the bioenergy situation in region of Skåne and evaluate the potential solutions in the region for a forest-fuel assortment, based on a bioenergy-cutting-system. As a part of this study I have compared ordinary manual cuttings done with a chain saw and cuttings made using the new ?bio- energy cutting system?. The cuttings made under both systems were tested in areas near agricultural fields or pasture land in order to maintain an open landscape.

Värmeåtervinning på förskolan Rymdattacken 1 : En jämförelse av värmeväxlare

In the spring of 2014 Sweco Systems AB were commissioned to design a ventilation system for a newly built preschool in Linköping. Terms from the client was that it cost efficiency would cope with the energy demands that are placed on the building. The unit chosen was a cross-flow heat exchanger, and this work is to compare it with two other heat exchangers to see if a more energy and cost efficient could have been chosen. The heat exchangers that was chosen for the comparison was a rotating- and a counterflow heat exchanger. Simulations have been made to the different heat exchangers by the manufacturers.

<- Föregående sida 30 Nästa sida ->