The natural sciences and the humanities are associated with differentpublishing patterns. Open Access publishing are mainly associated withthe publishing patterns of the natural sciences. Many Swedishuniversities and research funders are proponents of Open Accesspublishing, what will that trend mean to the scholars with a publishingpattern not corresponding to Open Access? In this paper literary scholarsare interviewed for the purpose of learning the motives and strategieswhich form their publishing pattern, and how they relate to Open Accesspublishing. The results show that literary scholars are less competitiveand hold a more gentle knowledge-sharing ideal, than natural scientists.The drive to gain acknowledgment and the recognition of colleagues inorder to collect academic capital as Bourdieu describes the academicfield is still present though.

The purpose of this project was to further develop and complete a quadcopter that had been built in an earlier course at KTH, so that it could be used for demonstration and education at the school. The quadcopter was at the beginning of the project completed when it came to hardware, and there was some software functionality implemented but no system for automatic stabilization. The main goal of the project was to implement such a system, and to combine it with the previous functionality to make the quadcopter operable and able to fly. To create a functioning and stable ground multiple basic software features has been implemented, and on top of that additional software to improve the safety, stability and functionality. The most important part is the control system that is responsible for converting sensor and control signals to suitable motor values.

The aim of this Master thesis was to examine how libraries at Swedish colleges and universities make Open Access journals in physics available to users. We examined if, where, and how the 50 Open Access journals that are listed in the Directory of Open Access (DOAJ) under the heading Physics (General) were made available to the public at 19 Swedish colleges and universities. We also examined possible patterns regarding qualities in the Open Access journals and to what extent the libraries made them available. For this descriptive statistic was used. The selection of library portals that were included in the study were those Swedish colleges and universities that teach physics.

Titel: Innovate or Stagnate! ? Open innovation in manufacturing small and medium-sized businesses in Småland.The purpose of the study is that, from a leadership perspective (innovationmanagement), create a better understanding of open innovation in manufacturing small and medium-sized enterprises. The study therefore intends to contribute to the understanding of how open innovation processes leads to greater innovation in manufacturing small and medium sized businesses.We have used a qualitative research method and adopted an abductiveapproach. We made interpretations and created meaning based on our research results.Our theoretical framework is based primarily on Chesbroughs (2003) research on open innovation. Based on this model, we have selected a number of other theories, which we perceived as prerequisites for small andmedium sized companies in open innovation processes.

To self-archive is to make research publications freely accessible by depositing them in an open digital archive or on a public website. The aim of this thesis is to explore what Swedish scientists think of self-archiving, what they know about it and how they make use of it, in order to understand why they do not self-archive more actively.A web survey was conducted which was answered by 296 scientists at the Swedish University of Agricultural Sciences (SLU). Results show that only 24 % have previous experience of self-archiving, but that a majority is willing to self-archive if there are no legal objections or if it is demanded by the research funder. The most important reasons why many scientists do not self-archive are that they feel uncertain about copyright issues and/or lack knowledge about self-archiving..

The task of this project was to build an computer processing system for pressureregulation, in which the pressure loss over the open hydrolicvalve should be kept as low as possible. By using an cross connected proportional directional valve the valve problem could be solved. The control- and regulationproblem for the pressureregulation system was solved by using the DAQ- card NI6035E from National Instruments and the computerprogram Automatic Pressure Control 1.0 which has been software developed and written in Visual Basic. The final result showed that correct processvarible was obtained in 0,5 seconds, when the setpoint was changed in the testarea 0 - 2,5 MPa..

The advantage and the possibility of keeping track of a number of vehicles to make work practice more effective and smooth is today a favorable choice for Visual Units Logistics customers. We?ve been evaluating the software and trying to take it one step further and letting not only the individual user, but maybe, the company as a whole benefit from its advantages. This has been done by using methods like letting ourselves get to know the software, user case studies, workplace studies, interviews and future workshops. This resulted in a prototype introducing a new function designed with all collected data in mind trying to make the software, Visual Units Logistics, even more effective for the every day work practice of the user.

Since the 1990?s Open Access has developed into an alternative model for scientific publication. Today an increasing political interest in promoting Open Access is commonly channeled through the implementation of policies by research funders. However, in the scientific community the uptake and acceptance of the model has been of notably different character.This Master?s thesis examines the understanding of and attitudes towards open access among eight senior Swedish researchers and how these have been affected by the implementation of the Swedish Research Council?s Open Access-policy as implemented in 2010.

This work aims to evaluate the possibility of using a graphical programming language to develop software for a digital signal processor. A fixed-point digital signal processor called Blackfin BF-537 is used for this. Instead of using conventional programming languages, like C or assembler, for software development the possibilities to use a graphical environment to fill the same purpose are examined. The development environment primarily used is NI LabVIEW, but also the use of Mathworks Matlab Simulink is investigated. A variety of programs consisting of various signal processing operations and utilities are developed using these development environments.

Traditionell systemutveckling präglas ofta av långa utvecklingsprocesser och en oförmåga attmöta förändrade behov från kunden. Problematik med buggar i mjukvaran och förskjutnadeadlines uppstår kontinuerligt och leder till högre kostnader för företag.För att komma till rätta med dessa problem behövs en systemutvecklingsprocess som belyserproblem direkt när de uppstår och därmed tvingar de inblandade till reflektion över processensom skapar problemen vilket belyser de verkliga bakomliggande orsakerna. Låg kvalitet påmjukvara är ofta ett symptom på djupare organisatoriska problemEtt synsätt som syftar till att möta dessa problem är lean software development. Synsättet harinspirerats av lean production som är en beskrivning av The Toyota Production system vilketi sin tur är det arbetssätt som har tillämpats av Toyota under flera decennier i den traditionellatillverkningen.Mary och Tom Poppendieck har beskrivit sju principer och 22 tankeverktyg som kananvändas för att skapa en metod för lean software development. Studien visar vilka styrkoroch problem som lean software development och lean production beskriver generellt samtvilka styrkor och problem som finns avseende beskrivning av Poppendieck's principer ochtankeverktyg i synnerhet.

Heat and power stations are often in need of optimizations. A simulation model is a tool for findingways to optimize the plant. The scope of this diploma work is to develop a simulation model ofBoiler 5 at Mälarenergi AB. Boiler 5 is a circulated fluidized bed boiler that was taken into service inyear 2001. Among the included parts in the boiler are cyclone, convection part andINTREX-chambers.

The main purpose of a Flight Data Recorder (FDR) is to facilitate the investigation of incidents. In order to interpret the data that has been recorded in the FDR the data has to be visualized in some way. This can be done with software on a computer or with hardware that is specific for the model of aircraft that the data originates from.The aim of this project is to visualize data for six parameters from the FDR of Saab 2000 in an avionics rig. The avionics rig resembles the cockpit of Saab 2000 and the displays in it are identical to the ones found in the plane. All six parameters are shown on the same display.Due to safety regulation vital systems in aircraft are doubled, with one system on the left side and one on the right.

This report describes a final thesis done during the spring of 2008 as part of the bachelor degree in computer engineering degree at the School of Engineering in Jönköping.The client is working in the consulting business and is involved in, amongst others, work regarding information security. Within this field they perform so called Threat, Risk and Vulnerability assessments. Today these assessments are done by a predefined method, but many details are controlled by the person documenting the project. A wish was made that the implementation was standardized, it should also ease the task of estimating the need for time and money. The solution for this seems to be a software tool.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

The advantage and the possibility of keeping track of a number of vehicles to make work practice more effective and smooth is today a favorable choice for Visual Units Logistics customers. We?ve been evaluating the software and trying to take it one step further and letting not only the individual user, but maybe, the company as a whole benefit from its advantages. This has been done by using methods like letting ourselves get to know the software, user case studies, workplace studies, interviews and future workshops. This resulted in a prototype introducing a new function designed with all collected data in mind trying to make the software, Visual Units Logistics, even more effective for the every day work practice of the user. A new function to keep track of vehicles outside the main working area at the same time as you still can keep track of the other vehicles in the field..