A key part in the development and verification of digital systems is simulation. But hardware simulators are expensive, and software simulation is not fast enough for designs with a large number of gates. As today?s digital zesigns constantly grow in size (number of gates), and that trend shows no signs to end, faster simulators handling millions of gates are needed. We investigate how to create a software gate-level simulator able to simulate a high number of gates fast.

Severe floods caused by heavy autumn rains in year 2000 raised the question whether measures to reduce the damage from high water levels, in the area surrounding lake Glafsfjorden and along the river Byälven down to lake Vänern, are possible. One option is to reduce flow resistance along the river and thereby lower the maximum water level a given inflow would cause. Good knowledge of hydraulic and hydrological conditions is necessary in order to estimate the effect of such flow-reducing measures. In order to quantify such effect a 1-dimensional hydraulic flow model has been set up for the river Byälven using the software package MIKE 11. The model is more detailed, especially concerning topography and bathymetry, than earlier models used for studies of the river.

This thesis has been performed at Scania CV AB Technical Centre in Södertälje and its aim hasbeen to study the causes and effects of deformations in the interface between the rear axlehousing ADA1100 and the central gear house R780 during operation. Design changes that wouldincrease the sealing capability of the studied interface are also suggested. Finite element (FE)and CAD software have been the primary tools in this study.Finite element (FE) simulations are used in the industry to predict and develop engineeringdesigns. The main motive for FE simulations has traditionally been to identify weak spots in thedesign, regarding high tensions and large deformations.The FE model is an aggregation of submodels and interface models that represents the rear axlehousing, suspension, central gear, central gear housing, wheels, bolts and weldings, and theirinteractions. The submodels have different material properties and they are connected withcontact interface models.Boundary conditions are defined on the bushings in front of the rear axle and on the air bellowsbehind the rear axle.

Abstrakt Produkten som jag har utvecklat är en mjukvarubaserad 3D-renderare. För att göra en sådan produkt är man tvungen att gå djupt in i området 3D och utföra alla beräkningar på egen hand. Dessa tar annars grafikkortet hand om. Denna rapport förklarar varför jag har valt att göra en egen mjukvarubaserad 3D- renderare och vad den är för något och i vilka områden den används. Här förklaras även min syn på programmering, digitala spel, vad programmering innebär för mig och hur min syn på spel har påverkat mig med tiden.

During the last years the need for real-time database services has increased due to the growing number of data-intensive applications needing to enforce real-time constraints. The COMponent-based Embedded real-Time database (COMET) is a real-time database developed to meet these demands. COMET is developed using the AspeCtual COmponent-based Real-time system Development (ACCORD) design method, and consists of a number of components and aspects, which can be composed into a number of different configurations depending on system demands, e.g., Quality of Service (QoS) management can be used in unpredictable environments. In embedded systems with requirementson high up-time it may not be possible to temporarily shut down the system for reconfiguration. Instead it is desirable to enable dynamic reconfiguration of the system, exchanging components during run-time.

Idag har de flesta företag och organisationer någon form för intranät-lösning. Dessa lösningar kan vara både mer och mindre sofistikerade, men har oftast det samma syfte; att distribuera organisationens information till dess medlemmar.Denna uppsats ägnar sig åt intranät och fördjupar sig i ett begrepp som vuxit starkt de senaste åren, nämligen Content Management System (CMS). Jag fokuserar särskilt på val av Open Source CMS, för implementation i mindre organisationers intranät.Uppsatsen är ett resultat av omfattande litteraturstudier inom sitt område och bygger främst på vetenskapliga artiklar av ledande experter. Ytterligare en källa är resultatet av en enkätundersökning, som också redovisas i uppsatsen. Denna enkät hade som ändamål, att kartlägga användares attityder till deras CMS-intranät.Uppsatsens kanske viktigaste resultat är en redogörelse för hur ett moduliserad CMS-intranät skulle kunna utformas, baserad på bl.a.

Arbetar organisationen agilt? Det är huvudfrågan i detta arbete. Organisationen har arbetat med den agila utvecklingsetoden Scrum i ett antal år. De har gjortmedvetna och omedvetna val, för att skapa sin version av Scrum. Frågan som studienförsöker svara på är om det verkligen innebär att man arbetar agilt, när man säger attman arbetar med en agil systemutvecklingsmetod..

The purpose with this essay is to find out how aware students are about the environment, andif they believe that their actions can influence the environment. I have used both earlierresearch and questionnaire surveys in order to fulfill the purpose. In earlier research, I haveused research based on materials that are scientific. According to the researchers it isimportant that the children and young people become involved and dedicated to theenvironment and its surrounding world. It is important to listen to the children's thoughts andvisions as they are aware about what happens, but do not reflect on the worst, but hope that itbecomes an improvement in the future.

Prisons are for many an unknown world, and few know about the prison culture which includes unwritten rules, power structures, interactions and relationships between inmates and correctional employees.While many think that Swedish prisons are too comfortable,inmates are facing extreme stress due to surveillance and detention, by depriving inmates their possibility to shape their own lives. When the inmates is deprived of control over their own life?s the penal system have great power to shape and to influence the inmates.The purpose of this paper is to investigate prisoners' experiences of treatment and exercise of power in prisons. Starting point is to examine what are the kinds of relationships between prison officers and inmates from a power perspective, if there is any difference between the closed and open prisons and how the inmates affected by the structures that exist.Based on my overall purpose, and with my informant´s stories which revealed a number of similar points, four main headings were developed; Mass media and society´s view, and unknown world, interaction between inmates and prison officers and consequences.Prison officers with the role as a contact persons as well and other staff which work close to the inmates play a significant role by supporting through motivational interviewing and can help the inmates to gain insight about their life situation and actions. My informant?s underlined that a good contact person can either help or discourage.Inmates who contributed with their experiences express that there is a big difference between open-and closed prisons.

Inom industrin är främsta skälet för kalibreringar att även de bästa instrumenten med tiden förlorar sin förmåga att ge noggranna mätningar. Med kalibreringsmjukvara som stöd effektiviseras kalibreringsprocessen och hanteringen av dess data. Instrumentteknikerna på Vallviks Bruk arbetar i systemet CMX Calibration Software av Beamex, och jag fick uppdraget att utvärdera dess användbarhet. Uppsatsen fokuserar främst på användarna och hur det upplever systemets användargränssnitt. Vidare skall utvärderingens resultat leda till förslag på förbättringar i systemet.

The purpose of this essay is to study uses of history in a complementary teaching material in the subject of history. The material in question is a 170 page book titled Hitler och Stalin- En bok om ondska. In English, ?Hitler and Stalin- A book on evil?. Essential to the study is that it is expressed within the material that it might be used as the basis for a discussion of the threats against an open democratic society.

The hypothesis of this study is that the local government act in Sweden 1862 was an instrument for the state to keep its´ political influence on the local level. It did not open for local self-government. The swedish historians Dahlkvist and Strandberg description of the Swedish local government act support this hypothesis, as does the analysis of political scientists Pettersson and Söderlind. The general opinion that the local government act opened for local self-government does still exist among many swedish historians.This study had two aims. The first was to investigate the actual extent of self-government in Borgvik, a small municipality in Sweden during the period 1861-1924.

For many years, there has been a housing shortage in Sweden. Many have been expecting a construction boom in the housing sector, but that has yet to arrive. With the current legislations and guidelines surrounding modern, energy efficient housing; production costs have increased dramatically in recent years. As a result, having a negative effect on housing production despite the high demand for homes.This exam work is carried out on a construction project of Sjötorpshus AB and its purpose is to evaluate how to optimise the construction process for the production of a new residential settlement, "Kv.Hunden", located in Katrineholm. In an interview with the company's MD, Pär Knutsson, four main issues were defined to focus on.

This report studies how the divergence between men and women is manifested in the physical space and how the representation of room recreates this divergence. Spaces are coded and women have traditionally been associated with private space and men with public space, leading to that the home is encoded as female space and public squares as male space. Thereby women lack a natural place in public space. The National Board of Housing, Building and Planning (Boverket) wants to change this situation by enforcing safety-creating measures based on gender equality theories.I have studied what potential risks the project initiated by Boverket as well as discuss the potential problems with representation. Can representation be used without freezing the space? I also search for methods for working with a gender perspective without reproducing gender stereotypes and roles and avoiding encoding the private as female and public as male? Also I use a public seminar with urban planners, artists and architects to retrieve how we work with these issues today.I conclude that city planning needs to incorporate new strategies of thought that does not divide space, e.g.

AbstractAim: The aim of this essay has been to study how the Swedish church has created the image of their religious activity through media. This has been by studying the three commercial campaigns launched by the Swedish church during the years 2000, 2001 and 2003. Questions asked are: How has the Swedish church chosen to profile it self? Which discourses can be recognized in the campaigns? Which messages has been communicated through the campaigns? How has these discourses created the image of the Swedish church?Method: The methodological framework is critical discourse analysis inspired by Norman Faircloughs? three-dimensional model. Thirteen images all part of the campaigns are analysed using a semiotic method.