This thesis aims to develop a control system for measuring electromagnetic compability (EMC). This has meant that a controller designed around an ATmega8 microcontroller has been manufactured and programmed. It has also meant the development of a comprehensive control software in the program MATLAB. The control system has been tested with satisfactory results and can now, monitor and control measurements of the EMC-type..

This report is the result of a master thesis at the Department of Mechanical Engineering, Division of Industrial and Economical Development, at Linköping University of Technology. The project was carried out on behalf of Fanerami AB, Mjölby and includes 20 weeks of full time schedule work.Cabinets with vertical mounted roller shutters all share the same problem, namely weight balancing. A roller shutter has an equilibrium area where the sum of the different forces acting on the shutter equals zero. As the shutter leaves that area it will pick up speed as it falls towards the bottom. When the shutter hits the bottom of the cabinet there is a potential risk of getting fingers caught and in this project a solution to prevent this from happening was to be presented.In this project, three concepts have been generated with the following different purposes:?In concept 1 the risk of getting any fingers caught when the shutter closes was to be eliminated in an efficient and inexpensive way.?In concept 2 the roller shutter had to be balanced at all time providing the possibility to keep the cabinet open in any position.?The last and most challenging task was to create a remote controlled TV cabinet.

The aims of the practical work carried out for this thesis were to redesign a clinical decision support system for thoracic surgeons, called AssistMe, and to evaluate the concept behind this system. The main objective of the thesis is to give an account of the considerations that were found to be of key importance for designing a clinical decision support system for thoracic surgery. Another aim was to let future users test the system after it had been redesigned and evaluate the concept behind it. The thesis also investigates users? experience of the system and their views on whether it would be applicable in their daily work practice.

ABSTRACTAim: The aim of this study is to chart the experiences of Swedish general psychiatric care on a Swedish University hospital from a relative?s point of view. The study focus on how they are meet, satisfaction with and participation in the care. The study is done as an improvement project.Methods: The study was conducted by performing semi-structured interviews with eight close relatives to patients on a general psychiatric ward. The interviews lasted for 20-40 minutes.Results: The result shows that relatives are satisfied with the way they are meet by the staff on the ward, that they appreciate staff that are open, down to earth and are inviting to form a good relationship.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Bygghantverk, 22,5 hp, 2014.

Youth centres- A qualitative study of how midwives relate to the potential ethical dilemma between youths right to integrity and parents right to informationThe aim of this study was to investigate how midwives at youth centres relate to the potential ethical dilemma between parents? right to information that young people between 15-17 years share at the centre, vs. youths right to integrity. The study was based on qualitative interviews with six midwives in various youth centres in Stockholm County. We analysed our empirical material according to Blennbergers consequential ethical model and Bronfenbrenners ecological system model.

On Ericsson Ltd in Borås a wireless communication system called MINI-LINK? is produced. In order to sell their product with the best possible quality guaranty, there is a signal processing circuit called ATLAS implemented in the system. This circuit would eventually be useful in the production and for the repairs of the radio units. Our commission was to examine the possibility for this use.

This study aims to investigate how small scale manufacturing companies reason around an implementation of a PLM-system, as well as the suitability of these systems compared to larger companies. The study is built on a qualitative method. Initially, secondary data was gathered through books, articles and reports. Primary data was gathered through four interviews. Two interviews were performed with PLM resellers, one interview was performed with a PLM developer, and one interview was performed with a small scale manufacturing company that opted to not implement a PLM-system.The results imply that overall differences between larger and smaller companies exist in regard to the need of PLM systems.

To find competencies on a workplace with flex office structure.Companies today, 2012 are facing new opportunities and challenges. Information technology develops, competition is bigger today than ever, increased environmental requirements will be added and new patterns of life and values are occurring. This means that people who work in offices feel strong pressure of conversion, which is something that people experience differently. Therefore it is essential how the working environment is designed in an office. Working in an office means a lot of information processing and we can see large changes taking place.

Ett problem för dagens organisationer är hur information sprids och vem som tar del av denna information. Detta informationsöverflöd innebär att den information som sprids inom en organisation måste ha mening, syfte och vara av relevans för personalen och för att kunna begränsa informationsmängden måste personalens upplevelse av informationen tas i beaktande. Studien har genomförts med teorier om informationsspridning och kunskapsutbyte. Inriktningen på arbetet har varit mellan ansvarig chef och anställda inom en organisation. Den informationsspridning som sker inom den undersökta organisationen är i grupp, individuella träffar samt virtuella forum.

The client, Senselogic, had noticed an increased demand for an e-commerce system integrated into its product, SiteVision, something that did not previously exist. Senselogic wanted to integrate a third-party system to manage e-commerce. The problem was that there were very many e-commerce solutions to choose from. In order to select the best system it was necessary to evaluate the e-commerce systems and compare them to each other. To identify the elements that has to be included in an e-commerce system a study of literature was conducted.

Uppsatsens syfte är att undersöka hur Gagnefs kommun och Bergs kommun arbetar med det generella strandskyddet, vilka attityder till detta som finns i kommunerna och hur arbetet påverkar landsbygdsutvecklingen. Särskilt fokus läggs på hanteringen av små sjöar och vattendrag. Undersökningen har skett med hjälp av en kvalitativ metod som innefattar intervjuer med markägare och tjänstemän från kommunerna samt observationer. Analysen utgår från Garrett Hardins begrepp tragedy of the commons, Elinor Ostroms begrepp common-pool resources och open access resources samt Bo Rothsteins begrepp sociala fällor och tillit. Slutsatsen med uppsatsen är att Gagnefs kommun och Bergs kommuner arbetar olika med strandskyddet gällande små sjöar och vattendrag. En majoritet av informanterna anser att det generella strandskyddet endast ska omfatta naturliga vattendrag, samt att strandskyddet bör vara mer flexibelt på landsbygden än i storstäderna. Flexibiliteten innebär exempelvis att strandskyddets regelverk ska anpassas till platsen och inte tillämpas generellt över hela landet..

SharePoint is a web based platform designed to provide internal communications and file sharing for businesses and organizations.In this project, we created a system consisting of multiple applications to be used together with SharePoint. These applications are meant to simplify the workflow for internal orders of products. The system is targeted towards companies that do not have a flexible approach to digital orders or companies that want to integrate this functionality into their SharePoint platform. The project includes, in addition to the creation of the system, installation of the software and the servers needed to run a SharePoint environment and their configurations.The system consists of four applications where one of these, the store application, is required for the system to be used at all. The other applications are an order management application, a purchase application and an incoming delivery application. Of these four, we have implemented the store application and the order management application. Our hope is that users will find the system easy to use and graphically appealing..

Given that the end-customer has become more demanding, the retailer has to deliver products according to the market demands, which have forced manufacturing companies to constantly search for new opportunities to reduce costs and improve efficiency. It is, therefore important to choose suppliers that are able to compete with the market demands.The market demands in the textile industry have lead to shorter product life cycles, which have caused manufacturers to deliver flexibility with high technology to compete successfully on the global market. To achieve the market requirements the underlying factor is to be aware and optimally use and control time. New technology can have a major influence in the production development, if the company choose to take benefit of the advantages, by optimal allocation of the internal resources the productivity and efficiency will increase, to accomplish a competitive advantage. One way to achieve this is by investing in a Unit Production System.In our thesis we have questioned what the main driving forces for an apparel manufacturing company is when it chooses to invest in new technology.

This thesis aims to answer the following questions: What type of vocabulary is used in the humanities? What does this implicate when it comes to indexing in the humanities? How do humanities scholars seek information and what type of information do they need? What consequences does this have when it comes to the development of humanities databases? How is the MLA International Bibliography organized? How does its indexing system ? CIFT ? work? How does the MLA International Bibliography correspond with the needs of the humanities scholar? The study shows that the type of vocabulary used in the humanities differs significantly from that used in the sciences. Therefore, information retrieval is often said to be problematic in the humanities when compared to the sciences. This is, however, not completely true. If consideration is taken to the different type of vocabulary used in the humanities, subject access proves to be more straightforward than has been generally recognized.