The aim of this thesis is to examine how mirrors were hung and used in decorating a room during the gustavian period (1770-1810) and the functionalistic period (1930-1939) in Sweden. I have compared the two styles and the way of decorating with mirrors. Based on the comparison I deduced the differences and similarities. The material which the thesis is based on are three drawings and one painting depicting four gustavian rooms containing mirrors. To illustrate the functionalistic period I used four photos from the catalogue from the Stockholm exhibition in 1930.

Ett undersöknings- och utvecklingsarbete för att lösa ett problem med att dränkbara pumpar i ett vattenavrinningssystem gick sönder med perioder på två år i genomsnitt, utfördes i samarbete med Cementa AB i Skövde. Orsak till pumpars haveri söktes och fanns vara bristande rutiner och kunskap om det underhåll pumparna krävde. För att lösa detta problem utvecklades riktlinjer för nyinköp av torruppställda pumpar för att möjliggöra kontinuerligt underhåll. Då möjligheter för placering av torruppställd pump saknades utvecklades ett pumpfundament för placering av torruppställd pump. Krav för utvecklingsarbetet togs fram i samarbete med Cementas underhållsavdelning och teoretisk dimensionering av dränkbara länspumpars dåvarande volymflödeskapacitet utfördes.

Periods of hypoxia are a recurring issue in Brunnsviken. Main factors that trigger hypoxia in Brunnsviken are eutrophication  due to anthropogenic emission of nutrients, stratification in the water column due to salinity and temperature differences  that prevents mixing and a sill inlet that prevents water exchange. As an attempt to improve the oxygen levels, bottom water is pumped from Brunnsviken causing aerated surface water to flow back into the basin.  The objective of this Master?s thesis was to study the change in dissolved oxygen levels due to pumping.

This thesis is about a part of the marquetrytechnique, scorching. Scorching is made by heating up something, put a veneer into the heated substance and make a controlled burning. This technique is old but still used today and have according to me great potential for development. In my work I wanted to give the scorching greater room then I earlier have seen. I wanted the scorching to be the dominant ingredient for a decorative element in a piece of furniture or an interior.

This thesis examines the regional part of the Church of Sweden. Existing as a Lutheran evangelical church since the declaration in Uppsala in 1593, the Church of Sweden became completely separate from the state in the year 2000. Apart from a small piece of legislation by the Swedish parliament, the now former state controlled church were to act on their own. This development can be seen as a result of several decades of discussions. The author is raising the question about the roll and function of bishops and dioceses in the Church of Sweden.

AbstractHåkan Ljung: Förklassik för knäppinstrument. En studie kring en sonat för cittra av Johan Wikmanson. Uppsala universitet: Institutionen för musikvetenskap, C-uppsats för 60 poäng, ht 2005.My main purpose with this thesis is to highlight a piece of music written for a relative of the 18th century cittern. This sonata, composed around 1780, is a well thought composition written in a pre-classical style.  The composer of this music is Johan Wikmanson (1753-1800) who is mostly known for his string quartets, songs and piano pieces. Because of the importance for the music as a whole, one task is to reconstruct the second movement from severe errors. This was carried out by doing an overall analysis of the two movements themes, motives and structures.Since many arrangements for plucked instruments occurred by other composer's works, my second aim is try to tie this Sonate as an original version written by Wikmanson himself. As a part of my main purpose, the reader will also receive a short presentation of the Swedish cittern designed by the Royal instrument maker Johan Öberg the elder (1727?-1779) with a description of its connection with the manuscript. .

Den här uppsatsen skrevs för att belysa de hinder som kan uppstå när man som musiker tar sig an nutida musik, i detta fall japansk sådan. Den inriktning som arbetet tagit är hur man genom att förändra notbilden kan komma närmare musikens kärna, samt göra instuderingen så effektiv som möjligt under en relativt kort tid. För att nå de resultat jag gjort har jag använt mig av två informanter som arbetat med två stycken för solo flöjt av Kazuo Fukushima (1930), Mei (1962) och Shun?San (1969). Fallstudiens genomförande har tagit tre veckor där informanterna som är studenter har fått studera in båda verken och därefter notera om det ena av dem (Mei) för att se om de med denna metod kom närmare kärnan i musiken och kompositörens intention.

The  change that has occurred during the past few decades concerning the development of electronic records, information technology and the constantly increasing quantity of information, have confronted the archival discipline with new challenges. In the digital world, the concept of ?record? has changed from representing something lasting and physical to something much more abstract and transient. The way to approach archival description has also changed, from focusing on the static preservation of archival records, to documenting the transactions of organisations, and to clarify operational processes. The discussion about the general purpose of the archival discipline, and its place in a changing world, has led to a new approach to archival description.

A distributed hydrological rainfall-runoff model has been developed using a GIS integrated with a dynamic programming module (PCRaster). The model has been developed within the framework of the EU-project TWINBAS at IVL Swedish Environmental Research Institute, and is intended for use in WATSHMAN ? a tool for watershed management developed at IVL. The model simulates runoff from a catchment based on daily mean values of temperature and precipitation. The GIS input data consist of maps with soil type, land-use, lakes, rivers and a digital elevation model.

Syftet med denna undersökning var att utforska den lärandes perspektiv genom att lära oss spela ett nytt instrument. Genom att försätta oss i en sådan situation och sedan granska våra egna läroprocesser hoppades vi kunna bemöta våra framtida elever med djupare förståelse. Vi ville på detta sätt försöka synliggöra faktorer som påverkar vårt lärande och bilda oss en uppfattning om hur vi påverkas av dessa.Undersökningen utfördes med oss själva som studieobjekt där vi under hela processen noggrant förde dagbok över våra upplevelser, både skriftligt och med ljudande inspelningar. Inspelningarna bifogas som en bidragande gestaltning till det avsnitt som kallas Processen. I Processen förekommer diskuterande tolkningar som fullföljs i Epilogen.Vår studie visar att det är svårt att till fullo sätta sig in i en nybörjares roll.

In which ways have composing processes in music appeared over the past 300 years? How may composing processes work today? What does new technology do to this processes?The key purpose of this study is to investigate various composing processes. A further purpose is also to gain an awareness of how we use modern technology by computers and their notation programmes.The research design of this thesis includes a display of literature related to composing processes. along with an analysis of the writer?s own experiences in the area.

The purpose of this project is to examine the development of the upper secondary school physics course and from this get a better understanding why the course is organized the way it is today. The timeless argument for studying science in school will begin this essay. After that the reader will be aware of when important discoveries in physics were made. Then school history is presented. In this part we are told when the first school started in Sweden, but the focus lies on the upper secondary school and the physics course.

The last decade has created an increasing pressure on companies to decrease their impact on the environment and to increase their effectiveness of recycling the company?s resources, especially for the steel industry. Companies have also started to realize the economic aspects of an effective internal reverse logistics. In the past the value of an effective internal reverse logistic was something that companies tend to underestimate and there are few academic studies done in this area. The purpose of this essay has been to identify key factors to create an effective in plant storage, transport, sorting and handling of returned steel. From these factors a generalized model for creating an effective return steel flow will be developed.

The construction industry has not undergone the same logistical development as the manufacturing industry; this, in combination with increased material price, leads to the fact that the construction industry must be improved. This master thesis is a part of the research cooperation Brains & Bricks goal of reducing production costs for the construction sector by 25 percent. Brains & Bricks is a cooperation between Linköping University, Peab and Katrineholms municipality. The master thesis aims to identify improvements in the flow of material, the Supply chain operation reference, SCOR, model has been used and the work has been carried out on one of Peab?s construction sites. At present the business is characterized by bad communication both between the construction site and the office as well as between the construction site and suppliers.

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.