Studien undersöker känslomässiga reaktioner vid kooperativt spelande, vilka som är gemensamma för båda spelarna och hur de påverkas av hur svårt spelet är. Arbetet utgick från studier av spelares emotionella reaktioner på spel och teorierna om Flow. Spelet Sanctum användes i en serie tester där mätningar utfördes på två spelare med hjälp av rapportformulär, pulsmätare och hjärna-till-datorgränssnittet Emotiv EPOC. Studien fann att spelarna ibland upplevde samma känslor när de spelade tillsammans och att den ökade svårighetsgradens huvudsakliga effekt var att förändringarna i känslorna blev skarpare och större. Det tycktes huvudsakligen vara motgångar som splittrade spelarnas upplevelser.

Problems arise when the number of products in stock does not correspond with the number of products the information system says the company has in stock. (Sharda & Agrawal, 2012) In order to change that, major changes has to be made when it comes to making continuous improvements and to raise their standards regarding product availability and record inaccuracy (Wild, 2004).The purpose of this study is therefore designed to identify factors affecting the balance differences and what impact it has on the efficiency of material flow. The demarcation of the work is that Atlas Copco has begun working with Lean and it will not be investigated nor the relationship between balance differences and Lean. The study was based on answering the following questions: What influencing factors can be identified for balance differences? What factors are relevant to the efficiency of material flow? What kind of impact the balance differences has on these factors?In order to answer the purpose and issues, a theoretical framework has been developed with help of literature studies and an analytical model.

To the sewer systems households, industries and other activities are connected. The wastewater is collected at treatment plants where a nutritious sludge is produced. The sludge does not only contain nutrients, but also hazardous substances originating from different activities in society. To reduce the flow of hazardous substances to treatment plants and to create a sustainable recycling of plant nutrients the Swedish Water & Wastewater Association has developed the certificate system REVAQ. This certificate requires a good quality of the sludge but also that the treatment plants maps the origin of the unwanted substances.

In cooperation with the Gislaved company Lerocon AB [1], a separation module wasdesigned as a further supplement to the Module System. The aim of theprojectimplementation was that the separation module could be flexible enough to feed themetal pieces, screws, nuts and other items with large variations of size, appearance andmaterial composition. The module should also be cost effective to manufacture.A separation module is a design which is ment to streamline the work in industries withautomation of the lineoperations. The module feeds the details such as screws, nuts, washersand pieces of metal in a continuous flow in which traps separate the details from each other.Traps may vary depending on the purpose and of the details that are fed. Perhaps it isimportant for the user that the detail-orientation is right after the separation module, whichmeans that all the pieces witch aren´t are fed back in return.For companies and industries in lineoperations that can be made more efficient withautomation, are production flow an important watchword.

Problem StatementAfter the hurricane Gudrun in January 2005 EON Elnät Sverige AB started the project KRAFTTAG, were 17,000 km of the airborne power grid shall be replaced with cables underground. The transformers in the airborne power grid shall be dismounted, renovated if necessary and then conveyed to stations, of type kiosk.Additional new transformers, more than planned, have been bought. This is due to the dysfunctional transformer flow from the demolished power supply to projects, were the new power supply is built, the general picture is complicated, since the reconstruction involves other companies and many employees at E.ON.PurposeThe purpose of this master thesis is to map and understand the existing transformer flow. The objective is to make a recommendation on how to increase the level of E.ON? s transformer recycling.Methodthe authors have worked with a system approach, including both qualitative and quantitative data.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

This thesis includes a description of the project flow for our projects at Semcon. The emphasis is on designing a manual for elMaster Concept.The project flow provides several minor and major elements plotting schedules for this project and the establishment of a manual. When a schedule is drawn, lists and tables with components and connections can be created. This is done to better manage drawings and make changes. These diagrams and tables are used in product manufacturing, testings, controls.

This master thesis is made of two parts. The first part concerns the method and results ofdesigning a motion control system for a piece of research-equipment called BIRGIT. Theequipment is made to be used for research on eyemovements. In the second part, a computermodel of a part of the balance organ in the inner-ear is developed. The work has been done atthe Bernadotte laboratory at S:t Erik Eye Hospital.The equipment the control system is made for is a so-called rotationchair.

AbstractElectricity consumption is a globally increasing problem caused by the high share of electricity produced in coal power plants. These contribute to high carbon emissions when only about 1/3 of the heat generate electricity and the remaining 2/3 of the heat cools off. Combined heat and power plants (CHP) have high efficiency because they use the residual heat for domestic heating. The CHP plant often use fuels from renewable resources, giving them a lower carbon footprint, but are also depending on the heat demand. If electric powered products such as drying cabinets convert to heat powered products more environmentally friendly electricity will be produced by CHP plants, which can supplant electricity, produced from coal power plants and reduce carbon emissions.

Det övergripande syftet med detta arbete var att skapa en övergripande sammanställning rörande ämnena flödesproblem och silodesign och specifikt ta fram riktlinjer för hur massflöde ska uppnås i silos för hantering av olika biobränslen. Dessutom syftade arbetet till att ta upp två autentiska exempel med flödesproblem och hur dessa kunde designas om för massflöde. För att ta fram riktlinjer har arbetet utgått från värden framtagna av Wu, Schott & Lojdewijks (2011). Dessa har sedan bearbetats i programvaran Silo Stress Tool skapad av Dietmar Schulze (2013) för att utvinna gränsvärden för massflöde beroende av egenskaperna internfriktion, väggfriktion och vinkel på silons ficka. Resultatet visar gränsvärden för massflöde för både cirkulära och rektangulära silos.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

Milkability or ease of milking, has higher importance today for Swedish dairy cattle producers after the introduction of milking parlours and automatic milking systems. Milkability is the cow?s ability to quickly milk out and be completely milked. There are several measures of milkability available. Today the farmer measures the traits subjectively in relation to the conformation scoring of the cow 30-270 days after her first calving.

Four different kinds of filter-materials with reactive surfaces have been studied concerning their capacity to absorb heavy metals in leachate from a municipal waste deposit. The heavy metals studied were: lead, cadmium, copper, mercury, chromium, nickel and zinc. The leachate contains high levels of dissolved organic carbon (DOC) and has a high pH-value along with a high buffer capacity. These characteristics of the leachate make it difficult to remove pollutants and require efficient filters. The filters that were examined in the report are blast-furnace slag with CaO, sand covered with iron oxides, olivine and nepheline.

Background - Swedish trade and industry primarily involves small corporations, including small manufacturing corporations. Currently, most costing models that are used are based on studies accomplished at large corporations. This conveys to the fact that product costing that occurs at small manufacturing corporations is based on all complexities that large corporations bring, which rarely match with small corporations. It occurs that small manufacturing corporations unconsciously rely on incorrect information that has been calculated based on great corporations? product costing.