AbstractThis work was assigned by a technological company that manufactures gas detectors in which the sensor signal is processed using digital filters. These filters have been developed by a consultancy firm which converted previously used analog filters to digital filters. The purpose of this work has been to analyse inadequate, and sometimes erroneous, documentation from the project in order to provide the company with know-how and tools for further improvement of their products. The work has been done using the simulation software COMSOL which was bought solely for the project. Analysis showed serious flaws as well as pure errors in the consultant?s documentation.

Internal working models of attachment are claimed to be unconscious structures operating outside the conscious awareness. Existing measures of attachment are almost exclusively explicit, either self-reports or interviews and it is questionable whether these instruments are able to tap into unconscious attachment attitudes. The main purpose of the present study is to develop Implicit Association Test (IAT) tools for assessing adult attachment and to examine their construct validity. Two sets of implicit attachment measures, based on the two-dimensional attachment model (Bartholomew & Horowitz, 1991), were developed. Convergent validity was assessed by examining (1) the relationship between implicit model of self and implicit self-esteem and (2) the relationship between the implicit model of other and implicit sociability.

Essingeleden in Stockholm is the most heavily congested road segment in Scandinavia and it is ofgreat importance for as well traffic within the city as for transit traffic. The capacity of Essingeledenand Norra Länken is not enough to accommodate all traffic. At times it is not moving at all, whichresults in long queues and an augmented risk of accidents. Consequently measures for increasing thecapacity on E4/E20, which will reduce congestion and the risk of accidents, are implemented byTrafikverket. In fall 2012 one lane of three at Pampas will be closed and so will the exit fromEssingeleden to Norra Stationsgatan, called Parkeringsbron.

Abstract The accident in 1986 at the nuclear power station in Chernobyl, Ukraine, dispersed radioactive cesium over large areas of Europe. The half life of 137Cs is 30 years and this radionuclide also behaves like potassium, which means that it can easily be taken up by the vegetation or be adsorbed in to the structure of clays, principally illitic clays. When radiocesium decays ionizing radiation is emitted, which is harmful to humans that are exposed, either directly or indirectly through food intake. It is there-fore important to know what happens to the cesium that is dispersed into the environ-ment. In this project a simulation model was constructed to simulate the adsorption and transport of radiocesium in the soil and plant uptake.

The problem presented in this report is that of finding a method to calculate the lift force from a single-element airfoil of arbitrary shape. A number of restrictions are used in order to simplify calculations while retaining reasonable accuracy. The problem is solved for the two-dimensional case only and no finite-wing effects are taken into account. Furthermore, inviscid and incompressible flow is assumed. The method used to solve the problem is the vortex panel method, with vortex singularities distributed over simplified airfoil geometry.

Do ceramics have to be static? This was the question that spurred me into this work, and what kept me working on to achieve the possibility of motion in my ceramic objects. By combining the knowledge gained through my former education as an avionics technician with my interest in the ancient ceramic craft, I strive to create kinetic ceramic handicraft suitable for interaction with an audience.By a series of different phases I slowly go from understanding what kind of motion I want my objects to have, to actually realizing this motion in three-dimensional objects. Through the use of simple models made from corrugated fiberboard followed by more advanced plaster models, combined with different complementary materials such as bicycle inner-tubing and recycled aluminium cans among many others, I, through a vast series of testing, slowly build up a knowledge base later applied to the ceramic objects.The result is for me a success; I have found a way for me to combine ceramics with mechanics. Through this I have created kinetic ceramic handicraft intended for interaction with an audience..

This work is meant to contribute to the research of adaptation studies by focusing on a special case: the transformation of a fictional diary into a movie. In order to sustain the form of the literary source the adaptation to movie requires certain strategies. Först of all, the diary genre is characterized by a one-dimensional narration. Second, diaries only supply a few written dialogues, hence this "void" has to be compensated and filled by media specific measures. Third, the investigated diary is a story of individualization and emancipation of a single woman.

Large retirement numbers and fierce competition of available labour, results in municipalities have to be more attractive as an employer. One way for the municipalities to fulfil their staffing requirement is partly to increase their recruitment efforts, and partly to educate their existing employees. Discussions about the supply of competence are therefore pressing within municipal activity. The aim of the study was to investigate how the concept of competence is used within a municipal administration. The method that has been used is Norman Fairclough?s critical discourse analysis, a method that allows multi dimensional analysis.

The stability of railway embankment is essential for safe transport. In order to ensure safe transport, water should be allowed to freely drain. Furthermore, as the engine driver has to be able to see signs, and people working on the embankment are supposed to easily see flaws on the rails to ensure safety for the passing trains, plants should not be allowed to grow on the embankment. In Sweden there are 12 000 kilometers of railway tracks and 25?30 % of them are treated for weed control every year.

Volvo Construction Equipment AB Components Division i Eskilstuna är mitt inne i ett omorganisationsarbete där fabriken byggs om från funktionsverkstad till flödesorienterade grupper detta för att effektivt möta den växande orderingången. När gruppernas värdeflöden tydligtgjorts återstår ett intensivt arbete med att optimera ledtider, lagernivåer och produkter i arbete med mera. Ett kraftfullt verktyg för att stötta detta arbete är diskret händelsestyrd (DE) simulering. Det har genomförts flertalet DE simuleringar tidigare på företaget, då främst av konsulter. I den nya fabriken finns en önskan om att utföra detta arbete själv.

The building industry consumes approximately 40 % of the total energy consumption in Sweden, where the using stage is dominating with 80 %. There is a lot of work in progress to reduce energy use in the building industry, and the demands from authorities regarding energy use increases. As a part of this work Building and planning department of Sweden has established a requirement that has been applied since 2006, and restricts a maximum energy use for buildings.The requirement includes that an energy simulation must be done in advance to demonstrate that it is possible to meet the demands.Reality is however more complex than an energy simulation program, that frequently underestimates the energy use of buildings. The purpose of this thesisis to study and analyse deviations between estimated and actual energy use in modern apartment buildings. The study includes four apartment buildings in Stockholm, Gothenburg and Jönköping that were built in 2007-2009.

This report is a bachelor thesis presented at the department of Computer Science andEngineering at Chalmers University of Technology. The aim for the project is to find a simplemethod to measure and display physical quantities in a three dimensional room.The report describes a method to construct a system for measuring differentphysical quantities via sensors. The system must be built in a modular and expandable way tobe adaptable to different tasks.The system explained in the report consists of two parts;A physical scanner with moveable probes for carrying sensors and a microcontroller forcontrolling the probes and communicating with the next part.An application written in Java for storing the measured values and presenting them in a lucidperspective.It is possible to construct the scanner with different designs and circuitry, with multiplexers andflip-flops, to ensure that an unspecified number of probes can be added to the system and thatthey can be operated simultaneously.The Java application is written in a modular way, using a design pattern that separates eachindividual part of the application. It contains exceptions and interfaces that ensure a safe andexpandable application..

Today many different types of lock systems are used all over the world. Passwords, finger prints and magnetic strips are a few examples. When the key is a three dimensional object, lika a physical metal key, the security depends, in a high degree, on that you can?t copy the object without access to it. One approach to copying the object is photographing the object, and from these photographs create a copy.

This essay tries to show how The Swedish Museum of Architecture, Stockholm, with the exibition Architecture in Sweden - Function, Design and Aesthetic through the Ages, presents and represents architecture. It is stated that this is done in a multi-perspectival, multimedial fashion, with the aid of, for example, photography, models and mixed material surrounding the wide concept of ?architecture?. One chapter discusses the relationships between the exhibition on site, the exhibition catalog and the museum´s website. Another chapter argues that there can be no essential or perfect representation of architecture, although this utopian wish most certainly exists even today.

This report is a bachelor thesis presented at the department of Computer Science andEngineering at Chalmers University of Technology. The aim for the project is to find a simplemethod to measure and display physical quantities in a three dimensional room.The report describes a method to construct a system for measuring differentphysical quantities via sensors. The system must be built in a modular and expandable way tobe adaptable to different tasks.The system explained in the report consists of two parts;A physical scanner with moveable probes for carrying sensors and a microcontroller forcontrolling the probes and communicating with the next part.An application written in Java for storing the measured values and presenting them in a lucidperspective.It is possible to construct the scanner with different designs and circuitry, with multiplexers andflip-flops, to ensure that an unspecified number of probes can be added to the system and thatthey can be operated simultaneously.The Java application is written in a modular way, using a design pattern that separates eachindividual part of the application. It contains exceptions and interfaces that ensure a safe andexpandable application..