Simulation means running a model of a system with suitable input and observing the corresponding output. Real-time environment simulation is a special kind of simulation used to simulate a control system's environment in real-time. This is done to test the control system before it is used in its real environment. In this project, computer simulation of a certain kind of environments, called track-based systems, is studied and a general model for track-based systems is developed. In this model, track layouts are represented by graphs, which is a flexible and extensible representation and a method for visualizing these layouts is presented.

Stage Design is design for action and contains décor, side-scenes and properties, as well as costume and grease-paint. The one responsible for this is the Stage Designer, who together with the Director, creates the best conditions for the actors to perform in. The stage, where the play takes place, could be either in a theater, an auditorium, or in another sort of room, at another place, inside or outside, and where the place itself inspires to theatrical performance and expressions. This type of theater is called Site-specific theatre. Two examples of this is the workshop ?Skogen sjunger? (eng.

Risk assessment is made to determine risks with contaminated areas and to determine which treatment the area requires. In Sweden, risk assessment is divided into three levels: risk analysis, facilitated risk assessment and detailed risk assessment. In detailed risk assessment site-specific guideline values are developed to compare with values of contaminants that are measured in the area.Site-specific guideline values vary with geological and hydrogeological parameters. The purpose of this report is to examine which of these parameters that affect the guideline values. The examination was done using a calculating program for consideration from the Swedish Environmental Protection Agency from the year of 1997.

This project was started within the Market-Design programme of Elforsk, with the aim of developing representative test systems of Swedish distribution networks. Using such test systems as a basis for reliability and customer interruption cost calculations makes it feasible to analyse the network tariff regulation of Swedish power  istribution companies. In particular, it enables studies of the incentives for companies to invest in system reliability. Until now, the available test systems are either not representative of Swedish conditions, or too small in scale and limited in function.Within this project we have created two test systems. In order to represent the diversity of actual Swedish distribution networks, we have created one test system for urban environments and another for rural environments.

Jag har gjort en webbsajt åt företaget Kök.Ett i Älmhult. Kök.Ett är en köksbutik som bland annat ritar och säljer kök. Jag har byggt upp den allra största delen av hemsidan i Flash, och kompletterat med PHP och kopplat till en databas (MySQL). Sidan är komplett med ett eget administrationssystem. Sidan har en dynamisk känsla som inriktar sig på att inspirera besökaren, och föra besökaren/kunden ett steg närmare Kök.Ett och dess anställda. I?ve built a website for the company Kök.Ett in Älmhult, Sweden.

The purpose of this study has been to make an inventory of combustible waste in the region around Norrköping and to investigate the composition of domestic waste, industrial waste and two different types of sludge. The work was performed at the request of Norrköping Miljö & Energi, due to the planning of an incineration plant. The inventory of the waste was performed through inspection of environmental impact reports, from waste disposal plants in a number of local government areas in the region. The quantities were also compared to another inventory, carried out in a different way. The characterisation of the wastes was compared to the fuel specification determined by Norrköping Miljö & Energi.

Background: An effective management of the healthcare's organization on one disaster site is considered as a condition in order to decrease damages and suffering at them as been hit of an accident. In KAMEDO-reports is described true accidents, how among other thing organizational parts been implemented and evaluations of which importance different decisions had. Aim: The aim of the study was to examine KAMEDO-reports concerning prehospital medical management on disaster sites. Method: Eight KAMEDO-reports was examined with focus on organization and management. Results: Four areas in which all could be influenced by the healthcare personnel in leading position was described: Management and Co-operation, Load and Go - Stay and Play, Priority and Triage.

The knowledge of the chloride content and its fluxes and patterns in trees is insufficient. Increased knowledge would be desirable, one of many reasons is to be able to more efficiently meet the problems that the substance causes in the pulp industry. The purpose of this study was to examine and describe the chloride concentration of Norwegian spruce (Picea abies L. Karst.) in the south of Sweden. Furthermore the aim was to be able to predict chloride concentration from readily measurable site factors.

Sweden's drinking water quality is considered to be high partly due to a high quality of the raw water and a well developed sewage infrastructure. Despite this, there is water contamination that could be prevented by installation of a sophisticated early warning system. Some of the major players in the production of drinking water have already invested in different types of early warning systems to ensure drinking water of high quality. There are various forms of early warning systems where automatic monitoring of E. Coli is an interesting alternative.

The depth-to-water-index (DTW-index) is derived from digital elevation models (DEM) to map soil wetness, in terms of distance from soil surface to the ground water table. The aim of this GIS based study was to investigate the existence of a relationship between DTW-index and forest site productivity (SP). The belief of such an assumed relationship was based on knowledge that the ground water level is related to site properties that can either promote or impede tree growth. Data primarily comprised rasters of the Krycklan catchment in northern Sweden and depicted DTW-index and a laser scanned vegetation height. The 100th height percentile of each pixel in the vegetation raster was assumed to mirror the top-height, letting it act as a relative measure of SP within a delineated area of equal stand age.

So?kmotoroptimering eller SEO (Search Engine Optimization), har blivit enmycket viktig del na?r det ga?ller att profilera sig online. Det som avses medso?kmotoroptimering a?r att go?ra fo?ra?ndringar pa? en webbsida sa? att denplaceras ho?gre upp bland resultaten hos so?kmotorerna, och pa? ett sa?dant sa?ttfa?r en sto?rre exponering. Na?r man fo?rso?ker go?ra fo?ra?ndringar pa? en sida sa?kan man dela in fo?ra?ndringar i ?pa?? och ?utanfo?r? webbsidan, on och off-site.Fo?ra?ndringar ?on-site? betyder dels att man go?r fo?ra?ndringar i html koden ochdels att man fo?rso?ker go?ra sidan sa? anva?ndarva?nlig som mo?jligt.

Digital depth-to-water maps can be produced from a digital elevation model (DEM). Then GIS- based algorithms are used to calculate water flows and the depth-to-water index classes dry, fresh, moist and wet. The purpose of this study was to investigate the possibility to use depth- to-water maps for site adapted planting.The results showed that use of depth-to-water maps for site adapted planting, roughly halved the proportion of improperly planted surfaces from an average of 9 % to 4 %. The variation in the values of proper surface decreased and the result became more even.. In addition, more pine than spruce was incorrectly planted.

The implementation of a material requirements planning system is a complex and demanding task. There has been much research into what factors are important in such implementations, but seemingly very little about the links between critical success factors and management control systems. This thesis attempts, through a case study, to answer the question of how management control systems affect the implementation of an MRP system in ASSA AB, a Swedish manufacturing firm. Data is primarily collected through interviews. Theory regarding implementation success definitions, critical success factors as well as management control systems is presented.

Safety in the construction industry has become a question of top priority in recent years. Despite a massive investment of time, money and knowledge, the occur-rence of fatal accidents in Sweden alone is around one a month.The purpose of this study is therefore to improve the safety on the construction site. By an examination of the role of the safety agents and their cooperation with the construction workers and supervisors as well as examine how safety agents can improve safety on the construction site, which is the goal of the study.Four questions were formulated based on the purpose and the goal of the study.The methods used to answer the questions were a questionnaire survey, multiple interviews, a literature review and a document analysis.The report describes the safety agent?s role as a complex one with many different tasks. The role of the safety agents is regulated in the health and safety law, but it can sometimes be difficult to interpret and the agents can therefore interpret their role differently.

By using industrialized building, pre-installed modules can be delivered to the construction site where they are easily mounted. This method has many advantages compared to on-site manufacturing, for example, the precision during the production process should be much higher than building each wall and floor on site. Furthermore, the quick erection procedure when using prefabricated elements and the possibility to use weather protection has the advantage of not being dependent on weather conditions, and many other factors.Masonite Beams AB is a Swedish company (a member of the Norwegian company, Byggma ASA) with a relatively new technology using light weight beams as bearing elements in the walls and a certain stiff board lamella slap which is mounted on the top of the floor structure creating an integrated stiff beam / board floor structure. The elements are flat which make it much easier to transport the elements from the factory to the building site where the building parts are easily mounted with special mounting stud.One of the main drawbacks of lightweight structure is the sound transmission. The main topic is low frequency annoyance, however the complex structural elements and their mutual sensitive connections other acoustical problems might appear.