Large quantities of chemicals are used in all areas of society. The chemicals can be toxic and dangerous for the environment if used incorrectly. To protect people and the environment from dangerous chemicals, a good control of them and an active work to phase out hazardous substances in all areas where chemicals are present, are needed. Banverket and Vägverket handle in production a wide range of chemical products. Many of the products are dangerous to the environment, for those who work with them and to others who may come into contact with them.

Texture is an important soil property and accurate particle size analysis of soil texture is therefore crucial. There are a number of well-established and newly developed methods available for determining soil texture. In order to compare the results of these methods, the differences between them must be determined. The difficulties, problems and differences regarding texture class determination were examined through a study performed on forest soil samples. The study compared different methods (pipette, hydrometer and field methods) and two types of dispersing agents (sodium pyrophosphate and sodium hexametaphosphate (calgon)) commonly used for particle size analysis.

The purpose of this study was to evaluate the different substrates that enter the digestion on Sundet wastewater treatment plant for production of biogas.This work have done an analysis of data about the biogasproduction from January 2012 to feburari 2013, this showed that the food substrates has a greater gas production than internal sludge.Through laboratory test the VS, TS and COD values for all the substrates used in the biogas production could be determinded. But the COD-method was less optimal for analysis of fat and food, therefore it optimized the method for fat but due to time constraints, this could not be done on the food substrates..

This thesis is made on behalf of SCA's Forestry Division and is a comparison of two bucking simulation tools: Aptan (manufactured by Skogforsk) and Best/upr (from Berget Systemdesign). The data is based on 32 stands from SCA's forests in Norrbotten and Västerbotten. The objective is to compare the simulations created by the tools with the harvested volumes from those stands. Three variables are needed for the bucking simulation; these are the diameter distribution (at breast height), the relationship function between diameter and height, and the taper coefficients. The volumes of five different assortments from the stands are compared.

Grundfilosofin i Supply Chain Management är att matcha utbud mot efterfrågan. Den så kallade Bullwhipeffekten pekar på att variationen mellan utbud och slutkundens efterfrågan ökar ju längre bak i försörjningskedjan man kommer. Med det menas till exempel att försäljningskvantiteter som faktiskt säljs i en affär sällan speglar de orderkvantiteter som leverantören skickar till tillverkaren som försörjer butiken med produkter. Förutom variationer i utbud och efterfrågan visade det sig att bristande interorganisatorisk kommunikation, brister i prognosarbetet tillsammans med en bristande datastruktur bidrog till en låg servicegrad. Den senaste forskningen belyser hur variation som orsakats av bullwhipeffekten kan minskas, samt att en låg servicegrad kan förbättras genom ett ökat samarbete i försörjningskedjan.

Value stream mapping is a tool that is frequently used by many different companies. It is a great tool used to achieve the work that follows the theories of lean production. The tool is used, however, only frequent on the factory floor and the method is also designed based on this type of use.An interest of applying the method on administrative parts of the company has occurred lately. Administrative parts of the company refers to the part that does all the planning such as purchasing, receiving orders, customer contact, contact with factory floor and other work that is made around the actual manufacturing. But the knowledge about applying value stream mapping on the planning part of the company is lacking because the method is relatively new.In this work, a comparison is made between the introduction of value stream analysis on production and planning.

Abstract    Objective: The aim of the present study was to investigate if inclinometer estimates of arm posture during paper mill work differed between periods of different arm visibility. The aim was also to identify strategies for and difficulties in assessing body-visibility on video. Methods: The study consisted of two parts, where part 1 aimed to investigate the validity of observation-based assessment of arm posture during paper mill work. Study 2 was a survey among people with experience in assessing the posture of paper mill workers from video. Results: The total time for the right upper arm visibility indicates that it was on average visible in 54%, partly visible 15 %  and not visible 31%.

The aim of this thesis is to study Viking Eggeling?s artwork Diagonal Symphony together with Eggeling?s own art theoretical writings. This method of reading Eggeling?s art theoretical writings with the aim to try and create a deeper understanding of his art and especially Diagonal Symphony is a new approach in Eggeling?s art historical discourse. The thesis starts with a description of how the field of art history has understood Eggeling and his art primarily through art historical research aimed at Hans Richter.

PurposeThe purpose of this study has been to investigate the documentation process following the guiding principles of the Quality Norms for Fall Prevention concerning fall risk assessment, risk identification, fall preventive measures, information and the making of an individual care plan.MethodThis study is a quantitative, descriptive and retrospective journal review study. There were 100 journals examine the existing documentation concerning fall risk assessment of patients who received treatment in geriatric patient care. The sample was consecutively.ResultsThe results showed that fall risk assessment was documented in 79 of 100 examined journals. 56 (71 %) of the fall risk assessments were made within 24 hours. In 59 of 100 journals the patient, relatives or former caretakers was asked whether the patient had had a fall within the last year, and in 61 of 100 journals it was documented that the nursing staff had made an assessment that the patient was going to have a fall during his or her length of stay if no preventive measures were set in.The majority of fall risk factors and fall preventive measures were documented within the areas of walking and transfer. It was documented that the patient was informed of fall risk, fall risk factors and fall preventive measures in 15 of 100 journals.

 In his book Wittgenstein on Rules and Private Language (1982) Saul Kripke claims that Wittgenstein argues for a certain form of scepticism in his book Philosophical Investigations (1953), namely a new form of philosophical scepticism, a result of Wittgenstein´s idea of language as language games. Nihilism, scepticism of meaning or of concept, constitutive scepticism are other commentators´ different names of the same phenomenon. The philosophy of Wittgenstein accounts for how our words, including the words of mathematics, have no meaning and there are no a priori justified objective facts as to what I mean about a word. We follow the rules blindly and without justification. We are unable to find any facts against this proposal.

This study centres on learning to read and methods for teaching reading skills. The aim is to provide a survey of the concept reading skills and the methods developed on the basis of different theories and the methods preferred when teaching children in primary school and why. The study is based on interviews with eight teachers who are working on a dailybasis teaching Swedish in preschool class or lower primary school. The result of my study is that the majority of teachers do not use a specific method, but rather combine several different methods, thus adapting instruction to each individual pupil. .

The problem presented in this report is that of finding a method to calculate the lift force from a single-element airfoil of arbitrary shape. A number of restrictions are used in order to simplify calculations while retaining reasonable accuracy. The problem is solved for the two-dimensional case only and no finite-wing effects are taken into account. Furthermore, inviscid and incompressible flow is assumed. The method used to solve the problem is the vortex panel method, with vortex singularities distributed over simplified airfoil geometry.

The object of this examination project is to produce a method of work sampling at Rapid Granulator AB. The aim is to perform the method at the company and evaluate if it is executable. The study is delimited to the basic construction of the 45-series in the assembly hall.Preparations to produce the method of the work sampling resulted in definitions of activities, a form and a product tree. Several days were spent studying the assembling to learn and understand the entirety.The work sampling result showed a large amount of no value adding time that was used in the assembling. Some of the activities could be reduced and we observed some problems during the assembly process.

Background: Infectious Diseases Institute points out that the potential of various viraldiseases possibly can block each other. It is said that the virus that causes common cold,Rhinovirus, may have saved many people from the flu. If this assumption proves true, itwould explain why some viral diseases in some countries have been slow to take off and pointto a new way to struggle influenza. Objective: The main purpose of this study, based onreported cases of RSV and influenza type A, type B and H1N1, investigate whether viraldiseases can block each other, i.e. difficult season of flu may delay and / or mitigate thespread of RSV in Sweden.

This essay analyses text written by a gender equality movement critical of feminism. Themovement is active on the Internet and through this essay I would like to show the tensions in contemporary political debates on gender equality and feminism. 350 blogposts have been deconstructed through discourse theoretical method. In the analyses I have shown the discursive struggle that is going on within the movement in giving meaning to concepts as knowledge, society, gender, politics, feminism and gender equality. The movement is using the technical potential in blogs and common Internet forums tocreate a common political we.