AbstractThe market?s demand to purchase more cost effective products is continuously increasing. The producers are forced to become more efficient and flexible with resources to produce high quality products at a low cost in order to maintain or increase market shares. With this in mind Isaberg Rapid AB is requesting a project to increase efficiency in the assembly cell of hammertackers. The company has found in Kaizen-events that there is a potential of efficiency improvements in the assembly group that has not been achieved.The objective with this paper is to identify the major factors that influence the efficiency in the assembly cell for hammertackers.

Phosphorus (P) is an essential nutrient but a surplus could lead to eutrophication. Furthermore, the minerals used to produce the mineral phosphate is a non renewable resource. There are in other words several reasons to reduce the leakage of P and the agriculture is one important area to attend. The aim of this work has been to investigate if carbon-rich arable soils content contain more P than arable soils with low carbon content. Moreover it has been calculated if the carbon-rich soils could pose a risk of P leakage by comparing their delivery of P with the plant uptake. The work has consisted of compiling the results from former gathered and analysed soil samples of 130 Swedish arable soils. The fractions of P considered are water soluble P (Pw), ammonium lactate-extractable P (P-AL), hydrochloric acid-soluble P (P-HCl), organic ammonium lactate-extractable P (Porg-AL) and inorganic ammonium lactate-extractable P (Porg-HCl).

In a world where digital media is becoming a greater part of people?s everyday and working lives it is plausible to assume that the upcoming generation of pupils expect the teaching media to adapt thereafter. It is this assumption of an increased demand that Natur & Kultur is hoping to be able to meet. This thesis has been a stage in the process of producing digital material in the subject of mathematics for high school students. Specifically the aims of this thesis have been to make a rough description of the largest competitive companies? products within the same market, explore and put together a brief theoretical foundation of contemporary research and produce concrete examples of ideas for digital applications.

Abstract In the contemporary world of information technology you find a multitude of applications and systems covering a broad spectrum of areas of need in different companies. One effect of this multitude of programs is the difficulty to make them exchange information with each other or to collaborate, since they are developed by different programming languages for different platforms, with different standards and different data formats. Our aim with this work is to describe how it is possible to tie these programs together to make them actually communicate with each other in order to exchange information, share their native methods and also to become a part of the overall business processes. In this integration task you will, among other things, find different levels of application integration such as data level, method level, application interface level and user interface level integration. Application integration also involves hardware components, called middleware, that facilitate the physical connection between applications. There is a range of different middleware products offered today on the market.

Playsam in Kalmar AB are world famous for their design of the toys they sell. Together with their CEO Carl Zedig the goal was to find a new product for the company.  The process has far from been linear, I started off in one direction, got rejected, turned another way and we finally decided to create a rocking horse in a De Stijl style. At the same time taking consideration of the demands from Playsam and myself.Playsam?s products are archetypes of ordinary objects around us such as the car or the aeroplane. The company mainly produces its toys in wood and the stylized shape together with the blank painted surface has become a hallmark for them.De Stijl, the Dutch art movement containing artists, designers and architects such as Piet Mondrian, Theo van Doesburg and Gerrit Rietveld.

This project is implemented as a thesis at the Royal Institute of Technology in the master?s degree program Integrated Product Design and Industrial Design Engineering. The project has involved development and efficiency of a free starter package for expectant parents with useful content consisting of useful products for both before and after childbirth. Areas that have been investigated include packaging development, service design and appropriate content for the package.During the work, theory about packaging design, materials, manufacturing techniques and logistics have been processed to base the further work on. The project process has involved competitor analysis and interviews with store owners and customer surveys, that have been conducted to identify areas for improvement of the current solution.

Purpose:Only 60 percent of the newly started companies survive their three first years. The purpose of this report is to obtain a deeper understanding regarding how newly started companies work with their positioning and if there are some kind of a relationship between positioning and the survival rate of newly started companies.Research questions:Do newly started companies know what position is? Do they incorporate positioning in their day to day marketing?Approach:We have used a hypothetical-deductive way of reasoning and a qualitative study to gather the information needed. We have through interviews asked our questions to six newly started companies in three different cities.Findings:In our essay, we reached the conclusion that newly started companies do not spend sufficient time or energy on positioning their products. The companies interviewed only market their product as a good product.

The purpose of this thesis is to assist the Swedish energy company NIBE Energy Systems in their studies of adaptive regulation applicable to electrical water heaters. Due to coming energy classifications of these appliances in the European Union, NIBE Energy Systems needs to use adaptive regulation, called Smart Control, to keep their products in the best possible energy class and remain competitive to the market. By using this Smart Control regulation a 2-3 % improve-ment of efficiency can be credited the system. This is a small number, but heavily needed, since the energy classes are based on the idea that the European Union is provided with electricity from coal condensate power resulting in a 40 % maximum efficiency. Furthermore, doing noth-ing will result in some water heaters not being approved to use on the market from 2015 due to low efficiency.

The ways designers work with craftsmen in other countries can vary alot,but still there are many similarities. In this study we make comparisonsbetween a number of projects involving three different designers and artisansin other countries and parallel that to our own work in South Africa.What we have seen is that there is some common denominators betweenthe different projects that are being taken care of in different ways.Some things that commonly attract the designers seem to be the skills ofthe craftsmen, as well as their colouring, patterns and materials. A furthercommon denominator in the projects is that people?s perception of qualityhas become an important issue. The products that are being developedare often sold in the country of the designer, and therefore a needto insure that the quality of the products is up to the standards expectedin that certain country has occurred.

Background: The consumers of today have the possibility to choose from a wide range of products and services. Consequently, the ability to differentiate the products is essential for the brand owners. If a brand owner does not manage to differentiate its product, it can be difficult to make the consumers realise the benefits of the product and convince them to buy it. One way to differentiate the product is to create a distinguished brand identity. However, it is not enough to create a strong brand identity, the brand owner must also be capable of communicating the brand identity successfully.

The ways designers work with craftsmen in other countries can vary alot,but still there are many similarities. In this study we make comparisonsbetween a number of projects involving three different designers and artisansin other countries and parallel that to our own work in South Africa.What we have seen is that there is some common denominators betweenthe different projects that are being taken care of in different ways.Some things that commonly attract the designers seem to be the skills ofthe craftsmen, as well as their colouring, patterns and materials. A furthercommon denominator in the projects is that people?s perception of qualityhas become an important issue. The products that are being developedare often sold in the country of the designer, and therefore a needto insure that the quality of the products is up to the standards expectedin that certain country has occurred.

The purpose of this essay was to find conceivable marketing- and business strategies that can be combined with a company?s lifestyle.This essay is dependent on a number of interviews with the owner of a maternity clothing trademark, PROUD. PROUD is a new company that has many different options concerning expansion, trademark and its existing and future products and also the knowledge regarding the client?s attitude towards PROUD.The authors of this essay believe that the trademark should represent a lifestyle. For a company to be able to deliver, it has to understand what the future clients want and need.

This thesis will describe the redesign of the manure fork SverigeGrepen. The productis available for purchase in Scandinavia and and parts of the rest of Europe.The product is available in stores but the companys goal is to start distribute it overthe internet. A problem today with a purchase over the internet is that the costumerhas to pay a high shipping-fee due to the products unique form. The long handlecontributes to the high shipping-fee which makes it hard to attract costumers topurchase the product online. Deficiencies have been found at the manure forks basketand needs to be examined.

Lantmäteriet (the Swedish mapping, cadastral and land registration authority) has been laser scanning Sweden since 2009. From the laser scanned data a digital elevation model (DEM) in grid format, with a resolution of 2 m, is produced. This DEM is called GSD-Höjddata, grid 2+ and from its data and the laser point cloud itself (in the form of a las-file) contour lines can be extracted. Lantmäteriet has not yet done this, but plans to update the contour lines in their cartographic products exist. If this is to be done in a satisfactory way an evaluation of different methods for it is needed.

The demand for animal products has increased in the last decades, especially for poultry and pork. Pork production has increased drastically globally, and also in Uganda. Thirty-one percent of Uganda´s population lives in poverty. Pig production is believed to play a crucial role in poverty alleviation, because of the ability to convert low quality feed into high quality protein together with high reproductive potential. African swine fever (ASF) is a lethal disease of domestic pigs often characterized by haemorrhagic fever and with mortality rates up to 100%. The disease is endemic in most sub-Saharan countries and since 2007 in the Russian Federation and Caucasus area.