Background: Traditionally defined boundaries and borders between organizations are at present being re-evaluated because of new and tougher demands. Today we can see a trend where these boundaries are being lowered or even eliminated when organizations choose to co-operate instead of compete. Purpose: In order to create an understanding for the partner selection process in the newly founded joint ventures between the companies which are building the Swedish 3G Network, the determining factors are being studied. Delimitation: The studies companies are co-operating as network operators but are at the same time competing as mobile operators. This relationship is in the literature described as co-opetition, which will not be investigated in this paper.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

The knowledge of value-enhancing factors in condominiums is very important for real estate agents when valuing condominiums, but it is also of interest to the owner for an upcoming renovation and sale. Previous research has sorted out the most fundamental factors affecting value of condominiums such as location size, age and condition.The purpose of this paper is by consumer?s actual preferences regarding various attributes identify the most value-adding factors in condominiums. Thereby we want to add and nuance previous research.This has been done through a quantitative method in which possible buyers have ranked how various attributes affect their willingness to pay. The results were analyzed and the median of the various attributes have been recognized.The result shows in accordance with previous research that the location is the primary value-adding factor.

EW26 is a Bachelor thesis carried out by students, Jessica Blomberg, Sara Danielsson and Mikael Johansson, during the academic year 2010-2011 at the Innovation Engineering Program of Halmstad University. The project was conducted in close cooperation with Ergosafe AB.Ergosafe develops, manufactures and sells electric sliding windows. Due to the company?s current expansion phase they want to increase their product range. The company has identified a need for large windows that moves vertically.

The purpose of this master thesis is to study the correlation and meaning of current ideas and practice at the public library of Gothenburg. This was done by comparing the visions and ideas expressed by the library through the library plan, with how the daily practice looks. For the theoretical framework organizational theory is used and research data was collected both from public documents and through observations. The public library of Gothenburg were chosen for the study because of it's newly renovated facilities. The idea is that these facilities make a suitable study object of the current ideas and priorities of the public Swedish library in general.The results show that the public library practice in Sweden still rests on the original public library ideas such as offering information for free and treating every user as equal.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

Inventories of epiphytic lichens on Scots pine (Pinus sylvestris) were conducted at three sites in east central Sweden: along the newly build motorway (Road E4), along the old road (Road 600) and in a reference site, to compare the effects of traffic pollution on lichen diversities. At each site, species richness, lichen mean sensitivity value (MK), air quality index of the forest stand/sample plot (LKI) and nitrogen impact value (N) were calculated and it was tested if there was any difference between the sites. Twenty-four species were observed in total, and Parmeliopsis ambigua and Hypogymnia physodes were the most common species at all sites. At Road E4, fewer lichen species were observed than at the other sites and this might be due to the impact of air pollution. The species richness at Road 600 was similar to that of the reference site, which might be explained by the improved air quality.

The purpose of this study is to identify the points-of-difference that should form the basis for Bryggarsalen?s future marketing efforts. Bryggarsalen is a newly established conference business in Stockholm. To be able to identify these points-of-difference, Bryggarsalen?s marketing problems have been studied from the resource-based view, claiming that the source of sustained competitive advantage derive from a firm?s unique bundle of resources.

Syftet med studien var att beskriva yrkeserfarna sjuksköterskors upplevelser av att arbeta med och stödja nyutexaminerade sjuksköterskor. En kvalitativ och beskrivande design användes. Undersökningsgruppen bestod av åtta kvinnliga sjuksköterskor från ett sjukhus i mellansverige. Huvudresultatet visade att de yrkeserfarna sjuksköterskorna var nöjda med nyutexaminerade sjuksköterskors arbetsinsats. En viktig aspekt var att nyutexaminerade sjuksköterskor frågade vid osäkerhet för att känna tillit.

In today?s technological society, there are increasingly less physical demands on the locomotor system. However, despite that notion strength and function in the hand?s complex biomechanical system are in fact both needed to cope with daily life. The grip function is a main function in the hand and is used in many examples of scientific research, for instance when assessing physical health and predicting the probabilities of premature mortality.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This essay describes my work as a director in a specialized orientation within psychodrama, surrealistic psychodrama. Using the language and performance techniques of theater and under the guidance of a director, psychodrama creates an improvised narrative or story. The essay describes several dramas I have directed, reflecting on my actions and choices as a director and group leader. I examine whether my working method has allowed me to be spontaneous and creative, which I believe the example of "The dangerous bear" demonstrates. The process enabled me to establish trust and receptivity so that a newly constituted group dared to investigate conflicts in symbolic ways associated with illness and death.

In today?s technological society, there are increasingly less physical demands on the locomotor system. However, despite that notion strength and function in the hand?s complex biomechanical system are in fact both needed to cope with daily life. The grip function is a main function in the hand and is used in many examples of scientific research, for instance when assessing physical health and predicting the probabilities of premature mortality.

The pace of product development is increasing. It is important to keep high quality in theproducts even though the time for product development decreases. Those companies whichcan utilize previous experiences are positioned with a significant competitive advantage. ToABB Robotics it has become evident that the knowledge transfer process within the productdevelopment department is inadequate. This study was a result and an attempt to address thisunsatisfactory insight.

In today?s technological society, there are increasingly less physical demands on the locomotor system. However, despite that notion strength and function in the hand?s complex biomechanical system are in fact both needed to cope with daily life. The grip function is a main function in the hand and is used in many examples of scientific research, for instance when assessing physical health and predicting the probabilities of premature mortality.