The cadastral index map is a great benefit to the surveying and governments. The map's main purpose is to show how the overall cadastral division looks in Sweden. The lack of quality of the cadastral index map dose not allows property-owners to know where to draw the boundary between their and others' property. In order to know where to find the boundaries between two properties, is it up to the property-owners themselves (self or in company by the other property-owner) to construct various usucaption at the boundaries. The main objective of the study is to verify the existence and extent of usucaption on forest properties in Bodan, a village outside Skellefteå.

This master thesis covers the development of an automatic tuning process for the existing speed controller for drive systems. The drive systems are resonant two-mass systems where a motor is used to drive a load connected by a shaft. The developed method relies heavily on system identification and the construction of a complete mechanical model of the process. With this approach, the common problem with poor load speed control that derives from measuring only the motor speed can be addressed and solved for a majority of such processes.The automatic tuning method has along with general test functions been implemented in a complete tool for automatic tuning, testing and performance evaluation and reporting for drive systems..

To be able to move around without having to think about each movement is for most people amatter of course. Todays society contributes to a life at high speed where the sparetime is oftenspend doing somekind of sport, even extreme sports which earlier only a few people wheredoing. This leads to not only good health effects but also to more injuries. One of the mostcommon injuries is the knee injury.Capio Artro Clinic is a clinic specialized in sports medicine and particulary patients with injuriesin knee, shoulder, foot, hip or elbow. They perform a great part of all the crucial ligamentsurgeries in Sweden and has therefor also a lot of patients in need for rehabilitation of the knee.During the rehabilitation the load of the injuried knee is increased in steps.

For systems with multicore processors contention for shared resources is a problem that occurs when several memory-intensive processes are executed in parallel within the same memory domain. This contention has a direct influence on the performance of the system and is a complex problem that has been recognized for a long time. An attractive and actively studied way to minimize this problem is by using a process scheduler adapted to allocate processor cores in a way such that contention for shared resources is minimized.With the introduction of multicore NUMA-systems (Non-Uniform Memory Access) the situation has become even more complex. In these systems the access time for processor cores to different memory domains vary depending on factors such as distance and load. Thus, the process scheduler also has to consider where the memory of each process is placed to minimize the distance and balance the load on each memory domain.This report presents a user-level process scheduler for a NUMA-system based on the multicore processor Tilera TILEPro64.

Background: Triage is the sorting of patients according to the severity of medical assessment. Triage has a long history of use in Anglo-Saxon countries but is a fairly new method in Sweden. Researchers have described the Manchester triage group method (MTS) and a literature review of the concept; working contentment and competence focusing on triage. Aim: The ambition with this study was to describe a number of triage nurses working conditions. The research questions were; working with MTS- does it bring work contentment? What kind of competence is needed? Method: Data was collected from 74 triage nurses by a questionnaire containing 37 questions and two questions provided the nurses the opportunities to describe their triage experiences.

The Anybus CompactCom modules are today using the Anybus NP30 processor. These modules are used for communication between industrial machines and larger network protocols. The communication loads on these systems are increasing every day and the limiting factor for the system is the processor.HMS, the company that develops the Anybus CompactCom, has shown interest for a benchmark test between the old processor and a new processor, ARM Cortex-M3. This project includes that benchmark. To be able to get results that reflect reality a test environment was created to simulate Anybus CompactCom conditions.

Safe operation of a large synchronous power system as Nordel is not an easy task.There are several aspects to take into consideration. This thesis focuses on the problems due to voltage collapses in a transmission system.The ability to foresee an upcoming collapse is vital to maintain stable operation of the grid. The grid operator at Svenska Kraftnät (SvK) uses the computer program SPICA to predict the maximum transfer limit at specified transfer sections. SPICA uses actual states from the grid to predict the transfer limitation, and a quarter later a renewed estimate is produced and so on. This means that the operator can se his transfer limits vary every fifteen minutes.Our task in this project is to validate the accuracy of the limitations obtained by SPICA.

The aim of this present study was to determine and evaluate whether the presence of brooktrout (Salvelinus fontinalis) and sediment load may be a threat against the reproduction anddistribution of freshwater pearl mussel (Margaritifera margaritifera) in a creek located innorthern Sweden. Freshwater pearl mussel is an endangered species and is dependent ofbrown trout (Salmo trutta) to reproduce. Therefore there are concerns of indirect effects onthe population of pearl mussel by competition between brown trout and brook trout. Ditchesfrom a nearby gravel road have been fixed to lower the sediment load into the creek. I tried toevaluate this action plan.

Objective: In recent years there has been an increasing interest within the clinical (medical) science in measuring people?s health. When estimating quality of life, present practise is to use the EQ-5D questionnaire and an index which weighs the different questions. The question is what happens if the individuals estimate there own health, would it differ from the public preferences? The aim is to make a new prediction model based on the opinion of patients and compare it to the present model based on public preferences.Method: A sample of 362 patients with unstable coronary artery disease from the Frisc II trial, valued their quality of life in the acute phase and after 3, 6 and 12 months.

The project focus on combustion of softwood pellets and pellets in a 40 kW grate fire reactor at TEC-Lab. Dept Applied Physics and Electronics at Umeå University. Experiments were performed at four primary airs to fuel ratios (0.7 to 1.3), where aspects such as temperature profile, levels of gases (CO and NO), sintering-/-slagging and unburned fraction of the ashes were studied. Four different fuel loads were used for wood pellets (10, 20 and 30 kW) and one fuel load for straw (10 kW). Combustion of straw proved very difficult to ignite, and also led to other combustion-related technical problem such as slag formation due to the relatively low melting temperature-/-slag temperature of the straw.

Similarities in earlier research between leadership styles and communication forms were found, partly concerning relations and partly concerning work assignments. Our approach was based on the notion that there could be a correlation between the manager2019s choice of communication mode (informal/formal) and leadership style i.e. Relation-Oriented Behaviour Leadership style/Task-Oriented Behaviour Leadership style. A gender perspective was used in the research. The method was quantitative with a questionnaire to women managers (N=78) in the private and the public sectors.

In this project forging of aluminum alloy Al 6026 T9 has been performed in the temperature range of 400 °C ? 470 °C. The alloy which was in the shape of a cylindrical billet was formed in a press with the aim of analyzing the effect of different forging temperatures and required press load for optimal die filling. The component?s dimensions were later measured and compared to a reference piece.

This report describes the development of a sample loader for my diploma work at Q-linea AB in Uppsala. The sample loader will replace the process of loading fluid samples into Q-linea?s instrument for biomolecule analysis. The earlier process was done by hand and was a time consuming and inefficient task.The work was initiated with a design phase where an overview of the system was created. The sample loader will be receiving text commands from a PC that coordinates all the subsystems like pumps and lasers on the analysis instrument.

Syftet är att undersöka om Sverige tillsammans med ett eller flera av de nordiska länderna kan utgöra en optimal valutaunion. Utifrån ett svenskt perspektiv visar resultaten att det är lämpligast för Sverige att ingå i en valutaunion med Norge och Danmark eftersom den ekonomiska integrationen mellan dessa länder har varit störst. Taylors ränteregel visar att Sverige och Norges räntebanor samvarier mest och Optimal currency area-index (OCA-index) visar att Sverige, Danmark och Norge präglas av störst ekonomisk integration.Vi har använt två olika metoder för att undersöka en optimal nordisk valutaunion utifrån ett svenskt perspektiv, OCA-index och Taylors ränteregel. De båda tillvägagångssätten fokuserar på hur ekonomiskt integrerade länderna är, men genom olika variabler och ekonomiska storheter. Ett OCA-index har skapats och skattningen visar att variabeln som beskriver konjunkturcykeln är den som har störst inverkan på den beroende variabeln, växelkursvolatilitet.

When farm animals are transported there are several factors that can affect their welfare. If the vehicle has an accident the welfare of the animals transported will probably be compromised. The aim of this study was to make a survey of accidents with animal transportation vehicles in Sweden. The survey included the number of accidents from January 2000 to May 2014, the cause of the accidents and how the animal welfare was affected by the accident. The authorities which were likely to have reports about accidents involving animal transports were contacted. There were no collected records about transportation accidents and the authorities referred to eachother for information.