Insecticides will be removed from Swedish forestry, at present insecticides are used to treat our seedlings to avoid them from being attacked by pine weevils. With the forthcoming ban on insecticides alternative protective measures will have to be tested. Holmen Forest Ltd has aimed to find an alternative and have developed a mechanic pine weevils protection accessory as well as a new concept on planting pipes. Studies have been conducted on the behalf of Holmen Forest Ltd to see how planting with the newly developed mechanical protectors and plant pipe stands up against the conventional methods used today. The study was conducted over a three week period. Three factors were compared regarding planting quality including i) pressure around the plant, ii) the depth the plant ended up in, iii) plant angle. Mechanical plant pipes were used in the study, and where tested like a one-handed and a two-handed pipe. The study concludes that further development is needed for the mechanic plant protector to live up to the speed and quality of conventional methods.

The aim with this study was to collect fundamental information, and to plan, a windpower farm in Juddhult , Småland in southern Sweden. The goal is to collect the bestavailable projecting planning support. The pieces of this projecting planning supportthat will be presented is; Environmental Consequence Description (MKB), productioncalculations, comparisons between different plant types, economic calculations, evaluatethe economy and give some farm design suggestions. The imagined wind farm will belocated in forest environment and which may cause a number of new problems. Specialinterest that will be affected, where special consideration because of the forestenvironmental is requested is, hunting, wetlands, ancient monuments and windturbulence.

The crucial factor for successful municipal climate work is that there are driving forces. Most importantly is that the senior officials and politicians in the municipality are dedicated to the cause considering that they have the power to influence and make a change. Besides proactive and committed individuals, it is necessary that the work is organized and anchored by clear and concrete documents and control systems. It is also important that the work is continuously monitored and evaluated. To collaborate with other municipalities, authorities or participate in various networks is another factor contributing to the improved climate work in the form of exchange of information, knowledge and experience.A major driving force for municipalities to improve themselves is the distribution of state aid and grants.

In order to reduce greenhouse gas emissions from human activities fossil fuels will have to be replaced with renewable energy alternatives, such as bioenergy. Sweden has a great potential to produce bioenergy derived from forest products and there is currently a great interest within Sweden in using stumps for bioenergy production. However, the environmental consequences of the method need to be investigated before stump removal can be performed on a large scale. Swedish forest soils contain large carbon pools and a different land use may change conditions so that soils that presently act as sinks of carbon could potentially turn into sources of carbon release instead. This study investigates the initial effects of stump harvesting on the emissions of three greenhouse gases, carbon dioxide, methane and nitrous oxide. The emissions were measured from the soil surface in a Norway spruce forest located in the southern part of Sweden.

In the end of the last century the interest for youth politics increased in Sweden. The causes for the increased interest were the more obvious youth politics questions and problems, for example the increased youth unemployment. In 1998 the government wrote down national goals and instructions for the youth politic work in a government bill (1998/99:115). This government bill describes how the youth politic work should be carried at a local level in the municipality.The purpose with this study is to investigate young people, in Värnamo kommun, view of their own situation. The study´s focus lies om three main concept; democracy, justice and faith in the future.

This bachelor?s degree thesis was conducted in mechanical engineering at Halmstad University during spring semester 2010 in close collaboration with the company Gremo AB, located in Ätran, Sweden. Gremo AB produces, developes and sales forest machines in both Sweden and on the international market.Gremo AB belongs to one of the market leaders in forest industry, especially with their forwarder. In order to become a market leader even with their harvester, the company decided to change the harvester to have a swivel and a leveling driver cabin.The aim with this bachelor?s degree thesis was to develop a design concept for the harvester driver cabin, which Gremo AB can apply on the new harvester.

The aim of this Master?s thesis is to examine how the introducing of municipal library plans has influenced some compulsory schools in Malmö. I wanted to know if the library plan is a possible way to improve the quality of the school library. Through qualitative interviews with four school librarians and four headmasters, I investigate their knowledge of the library plan and their opinion of the possibilities to realize the directions of the plan. The theoretical framework is based on a model of organizational culture by Bakka, Fivelsdal and Lindkvist.

Begreppet ekosystemtjänster kan användas för att tydliggöra värdet av landskapets funktioner och därmed underlätta kommunikation mellan markanvändare då olika intressen konkurrerar. Emellertid finns det få studier som inkluderar en kvantitativ eller kvalitativ värdering av ekosystemtjänster på landskapsnivå. I detta arbete har markanvändning och ekosystemtjänster studerats i ett landskapsperspektiv, med Vilhelmina Model Forest (VMF) som studieområde. Den övergripande frågan i VMF är hur rennäring kan kombineras med andra markanvändningsintressen, huvudsakligen skogsbruk. Syftet med studien var att göra en kvantitativ värdering av markanvändningsintressen och ekosystemtjänster.

This case study is made on assignment of Södra, region Öst, as a part of a campaign promoting more active management of the oak forests in the region. Hardwood trees of good quality, especially oak, has a high value due to that the sawn material is highly estimated by the market. It is important that the Swedish oak forests are managed in a proper way in order to meet the future demand. Södra has therefore decided to increase the focus on oak in the Kalmar region and they would like to find out if continues cover forestry (CCF) under certain conditions can be an appropriate management model. The motive is to make use of the existing oak forests more efficient, not just considering well managed forests but also the more neglected oak forests, on poorer soils. Thus, the objective for this study is to examine if CCF is appropriate method in the three stand types; broadleaved mixtures oak forest, oak islet, and oak/spruce forest. Existing management models were surveyed in the literature.

Background: Female representation on boards is an ongoing debate. The European Parliament voted in November 2013 in favour of a proposal that it should be at least 40 percent women on company boards by 2020. Jens Spendrup, president of the Confederation of Swedish Enterprise, was interviewed on Swedish Radio in February 2014 and stated that there are not enough qualified women to recruit to the company boards. The listed companies in Sweden only have 22 percent of women in their company boards and given Jens Spendrup?s statement should they have difficulty reaching up to 40 percent by 2020.

The forests in the unique archipelago of the Baltic Sea is housing many and high values. For the resident population, which has a central role in sustaining a living archipelago, the forest can contribute to the outcome. The forest also contributes to turn the archipelago into one of Sweden?s most attractive recreational areas. Furthermore, these forests exhibit very high environmental values, and they are an element in the traditional cultural landscape.

Dead wood is important for many species. The amount of coarse dead wood (diameter >10 cm) is much lower in managed forest than in unmanaged forests. Stumps constitute the largest proportion of the volume of coarse dead wood in managed forests. Since stump harvest for biofuel may increase, the amount of dead wood will decrease even more, which may threaten biodiversity. The first aim of this study was to compare the amounts of fine woody debris (FWD, .

ABB I-R Waterjet Systems combines the robotics and motion expertise of ABB Flexible Automation with high-pressure intensifier/pumping technology from Ingersoll-Rand to provide and continue to develop innovative waterjet cutting systems for global markets. The purpose of this assignment is to develop a process water purifier. The purifier should be applicable as an option to ABB I-R?s production cell Cutting-Box. At first hand the process water should be purified well enough to let out in the municipal sewage system, but the ultimate solution is purifying the process water to the range that recycling is possible.

This bachelor?s degree thesis was conducted in mechanical engineering at Halmstad University during spring semester 2010 in close collaboration with the company Gremo AB, located in Ätran, Sweden. Gremo AB produces, developes and sales forest machines in both Sweden and on the international market.Gremo AB belongs to one of the market leaders in forest industry, especially with their forwarder. In order to become a market leader even with their harvester, the company decided to change the harvester to have a swivel and a leveling driver cabin.The aim with this bachelor?s degree thesis was to develop a design concept for the harvester driver cabin, which Gremo AB can apply on the new harvester.

Thinning is the partial removal of trees in a forest stand prior to final harvest. The term can be divided in pre-commercial thinning where little if any volume is removed from the stand and commercial thinning where removals are intended to provide a positive economic result. From a silvicultural point of view, the goal of thinning is to enhance future crop tree quality by removing low-quality stems and providing sufficient space for the accelerated development of retained ones (Huuskonen & Hynynen, 2006). The goals of this study was to see if commercial thinning could positively affect the short and medium term timber supply (MTTS) in the Interior regions of British Columbia (BC), and whether or not Scandinavian forestry practices could be adopted in the BC context. The mountain pine beetle (Dendroctonus ponderosae Hopkins) has created significant forest planning problems in BC. The annual allowable cut (AAC) was raised to capture beetle-killed timber while still merchantable.