Sweden has an environmental goal to achieve until the year 2020. To achieve this goal the construction business has to take an initiative to use the modern techniques that are available to lower the energy consumption I buildings. There?s also a debate going on today regarding the energy demands set by the Swedish government through Boverket, some communities throughout Sweden thinks that the demands are to low and have therefore set up own demands regarding energy in buildings.The possibility to construct energy-saving buildings is today very great, with energy-efficient heating-systems and dense climate envelope. The interest to raise energy-efficient buildings have also increased as a consequence that the population have become more aware about their impact on the environment.

The construction and use of buildings in the EU accounts for half of the EU?s extracted materials and energy consumptions, and a third of greenhouse gas emissions. In the past decade, the construction sector has responded to such concerns by focusing on post production energy efficiency. However, new findings indicate that upstream construction processes influence emissions significantly ? necessitating a shift in focus to include material choices and building processes.

Purpose/Aim: The aim of this thesis was to examine how multi channel publishing in different stages effect the work for journalists.Material/Method: The thesis is based on ten case studies selected from the literature and one conducted especially for this thesis. The case studies have been categorized according to a model that describes three strategies for multi channel publishing. The first strategy is to have a primary publishing channel, the second is to have separate editorial staffs for all publishing channels and the third is to treat all publishing channels equally.Main results: Journalists working for companies using the first strategy have not experienced any major differences in working conditions or work practices. For journalists employed by companies using the second strategy for multi channel publishing the effects on the journalists was noticeable but not major. The effects on journalists in companies using the third strategy are mainly stress and an uncertainty regarding how to use special media techniques..

This paper is part of the research programme ViSuCity, a programme with the goal of creating more sustainable urban planning through the development of better visual tools, which ultimately means better communication between various parties of public planning. The paper concerns the implementation of MCE into a 3D program for visualization. Multi criteria evaluation (MCE) is a technique that has been developed during the last 20 years. It merges GIS with AHP, forming a decision making tool for localization of, for example, new buildings.The result is an automated tool that enables advanced analysis of geographic areas.The tool has a very high potential due to the completely automated MCE and it is adapted for people without a technical background, let alone formal training in MCE. It provides great opportunities to test different scenarios, something that should be an important advantage.

The purpose of this project was to evaluate how energy efficiently some of JM?s residential buildings can become in standard production. What kind of measures are needed to achieve the level of energy demand that is included in BBR12 (Boverkets Byggregler)? What measures are needed for achieving a lower demand so that the buildings could be classified as passive houses? The investigation has included a single family house and two different types of apartment blocks.The simulation programs Enorm and VIP+ have been used to calculate the energy demand of the buildings. The results from the programs have been compared with the measured energy demand for the three buildings.

Housing construction very close to the lake Mälaren has become very popular today. One potential problem with these houses is the influence of the sea climate. Unprotected buildings are affected by strong winds and precipitation. So for that reason, it is very important to make an accurate climate investigation and use it for decision-making during the planning of the new settlement.It is very important with a good moisture protection regarding pelting rain, that is the combination of wind and rain. This is more important for buildings close to a lake, as this location normally means a higher exposure to wind.

Today´s roofing of dwelling houses is a very time consuming procedure, which includes a lot of different steps on the construction site. Not only does it cost a lot of money, but often do problems with rot and mold occur in the attics of houses today. The use of prefabricated modules has seen a great breakthrough in the field of construction of dwelling houses; at least when it comes to foundations and walls, where this type of approach makes the construction process way more efficient. What no one previous has succeeded to develop is a corresponding system for roofs that meets the demands of a dwelling house. Accordingly the goal of PlusTak has been to come up with a proper module system for roofing of dwelling houses, where the roofing is completed to meet the demands of the Scandinavian market. During the project a lot of effort has been put into customer contacts and the usability of the product, as well in the manufacturing process as on the construction site. This development has gone hand in hand with several practical tests and tryouts.

Energy efficiency is today more important than ever, mainly due to the high energy prices and the approaching climate changes. Heating of buildings is an essential area within energy efficiency. Many buildings are old and were built at a time when the energy prices were low and the term ?energy efficiency? was unheard of. By applying today?s broad range of energy saving actions on these old, and thereby often, heating ineffective buildings, this area has a large potential in reducing energy consumption and costs.Churches and chapels are generally old buildings with, in many cases, ineffective heating systems and therefore consume much more energy than needed.

A large proportion of the energy consumption is in the building industry and a large part goes to heating our homes and premises. In the developing countries' development now threatens the large consumption of energy in our earth's climate. It is in the West world that we must be good role models in terms of energy efficiency. One solution to reduce energy consumption for heating of buildings may be to continue to build low energy houses and passive houses, but it is also about rebuilding the buildings that currently have high energy consumption such as the old Million program Houses. These buildings will be standing many years and their energy consumption will not diminish over time by itself and energy prices will certainly not diminish in the future.

AbstractTerrace III in the Birka Garrison. An analysis of function based on artifact quantification and find preparation. This paper deals with Terrace III in the Garrison of Birka, Uppland, Sweden. The main purpose is to investigate the function of Terrace III. The analysis consists of two parts.

certain building or environment can get a protection as a notable building if it contains certainvalues. These values are established by a certain category of people from the cultural sector.These people use established criterions to define the cultural value of the object. The objects canbe evaluated differently depending on who has done the evaluation. The people who protect thecultural environment and choose which buildings that are to be defining as notable buildingsoften uses a special model to characterise the different cultural values. This model is produced bya man called Axel Unnerbäck.

Franchise theorists have to a large extent failed to keep up with the actual development in global franchise chains. The recent emergence of fast growing multi-unit-franchisees has fundamentally been ignored, and it has been claimed that the new phenomenon can be regarded as a mere replication of the franchisors? structure and control system into sub hierarchies. This study however, suggests that the reality is more complex. Through conducting case studies of two Nordic multi-unit-franchisees, new theories are built explaining how and why control systems are designed the way they are.

AbstractWe all have experience of dwelling, which means that everyone can have an opinion about the architecture of the dwelling. Today the building companies do not have time enough to investigate which architecture qualities their clientele ask for in their apartments. JM AB use to call their apartments ?generous city apartments?. But do these apartments fulfill the needs of their dwellers? And what would the apartments look like if they were designed according to the wishes of the dwellers? When JM AB get knowledge about the dwellers needs and wishes they can make even better apartments for their future customers.The purpose and the objective with this report are to draw up proposals for tenant owner flat.

This thesis has been carried out at the Building and Civil Engineering Programme at Chalmers University of Technology in cooperation with NCC Technology. The study aims to investigate the optimal design of a library of standardized structural solutions for in-house multi-family buildings and what benefits it brings. Today NCC use technology platforms to improve efficiency and simplify the construction process. The platforms provide the constructors guidelines on how construction details should look like, but the details are not complete. NCC Technology started in the spring of 2013 a project to investigate what benefits there are to create a library of standardized structural solutions for the constructors, with more detailed solutions than in the platforms.

In the report we have investigated four high-rise buildings with the intentions to find out witch parts are prefabricated and what relation can be found between structural design, prefabrication and the logistics. After the investigation we noticed that the grad of prefabrication in each one of the projects is good in relation to what purpose the building have and the given background. During the report we found that layout ? structural design ? prefabrication ? logistics is an order that we think can make the production of the building more effective if followed. We believe that the prefabrication of high-rise buildings have potential to grow and get more optimized in the future..