Sök:

Sökresultat:

1817 Uppsatser om Moving costs for harvest machines - Sida 32 av 122

HelpSeat

The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

Hållbar vattenförsörjning i områden med vattenbrist : Sustainable water supply solutions for areas affected by water shortage

In some coastal areas in Sweden water shortage sometimes appears because the withdrawal of groundwater is greater than the groundwater recharge. It creates a situation where the available groundwater is insufficient to support residents and businesses with drinking water. The high withdrawal of groundwater also creates a risk for saltwater intrusion to drinking water wells. The problem most commonly occurs during the summer when the groundwater recharge is low, but the population is high, due to tourism and summer residents.The purpose of this study was to investigate how local water supply in areas affected by water shortage can be solved as sustainable as possible. The work was divided into three parts where the first part comprised of a literature review on water systems in which four different options were investigated: artificial groundwater recharge, rainwater harvesting, desalination and water reuse.

Vilka faktorer påverkar komposition och val av växter? : olika aktörers sätt att arbeta

The tomato is an important crop worldwide, and in recent years it has received great attention due to its rich content of carotenoids, which in studies indicate to have health benefiting properties. Many studies have been done in this area of research and in how to optimize the carotenoid content in tomatoes and tomato products. The objectives of this essay were to summarize present data in this field. The results were as follows:There are nine different carotenoids identified in tomatoes. Lycopene and ?-carotene are the ones that have been given the greatest attention.

Könsselektering av spermier från lantbrukets husdjur

Millions of preselected progeny have been born since the development of The Beltsville Sperm Sexing Technology 1986. The method is based on flow cytometry and sorting is done on the basis of DNA difference of the X- and Y-chromosomes. Preselection of progeny provides an opportunity to obtain genetic gain and increased production as well as increased animal welfare and decreased environmental impact. However, the method is associated with low fertility, high costs and uncertainty whether the sorting process contributes to DNA damage and thereby results in genetically impaired progeny. Today, sex sorted sperm is only commercially available in the bovine industry, due to the fact that bull sperm is more suitable for selection than sperm from other species.

Logistiska lösningar för en lönsam byggprocess

This is a study, the purpose of which is to investigate how the construction company Sefab Bygg AB is able to increase its profitability and render a more efficient production process through logistic solutions. The study is made during one of Sefab´s present projects. The project includes sanitary renovation of 650 apartments in the co-operative Opalen in Norrköping.To find out whether changes of logistic routines are profitable or not, it?s necessary to evaluate the total cost of the changes. A total cost analysis is a mapping of all the costs for a particular material, on one hand for the present situation and on the other after the change.

Sveriges potential för elproduktion från takmonterade solceller : Teoretisk, teknisk och ekonomisk analys

The Swedish potential of electricity production from roof mounted solar panels has been determined in three steps: accessing the existing roof top areas, simulating the amount of electricity solar panels can produce on these areas and finally analyzing how large the necessary economical change is to make the solar cells profitable.The total existing amount of roof top areas are 319 square kilometers and the area distribution follows the distribution of people. This leads to an installed power of 47,9 GW which are expected to produce 49,0 TWh electricity per year. If the quality of the electricity is prioritized the highest the power is reduced to 3,7 GW, generating 3,8 TWh yearly, but if the hosting capacity is calculated from Sweden?s total electricity need, the capacity is 42 TWh per year.Today, solar panels are not profitable in Sweden for houses, even though there is a subsidy of 35 % of the investment costs, discounted in 25 years. The profitability is calculated with a cost of capital of 5 %, a price on electricity of 1 SEK/kWh and an investment cost of 20 SEK/Wp.

Samhällsekonomisk analys av ett djupförvar för använt kärnbränsle i Forsmark :

This thesis investigates the socio- and environmental economic effects of a deep repository for spent nuclear fuel in Forsmark in the municipality of Östhammar. I seek to show the general picture but focus on the effects on employment, environment and income. Cost-benefit analysis is used to investigate the differences in utility between a scenario with and a scenario without a deep repository in Forsmark. Most of the possible effects can not be valued and many can not even be quantified with the data available today. Therefore this thesis has a bit of a ?preliminary study character? and seeks to show what we know today and what needs to be further investigated when available data allow it. The costs that could be valued are noise from the traffic during the period of building and emissions of carbon dioxide and nitrogen oxides from the transportation of rock masses during the building period.

Utveckling av loadlimiter för bilbarnstol

The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

Ska olika VaR-modeller användas för olika tillgångstyper?

I takt med att handeln med finansiella tillgångar ökat har också intresset för att finna tillförlitliga metoder att bedöma risken ökat. Ett mått för att mäta risken för en tillgång eller för en portfölj av tillgångar är Value-at-Risk (VaR). VaR definieras som; den med viss sannolikhet förväntade förlusten från ogynnsamma marknadsrörelser över en definierad tidsperiod. Fördelen med VaR är att riskbedömningen bryts ner till ett enda mått som är ganska lätt att förstå. Det finns flera olika sätt att beräkna VaR och det har gjorts många undersökningar för att testa vilken modell som ger bäst resultat.

Dragleksak för Playsam

The report is a project in cooperation with the Swedish toy company Playsam. The assignment was to design a new toy to their range of products, a pull along toy in shape of a snail with a mechanical function. The research phase contains studies and analysis of the company, its identity, product range and its customers. The research phase includes all the information needed to complete the project. A number of concepts were presented for evaluation by the company.

Industrialisering av konsumentprodukt : Från inkommande material till färdigvarulager

This report examines the industrialization of a newly developed household machine on behalf of Technogarden Engineering Resources in Karlstad, Sweden. The report is a part of the final course in the Bachelor Program in Mechanical Engineering at Karlstad University and takes place in spring 2014.An innovator, an investor and a engineering consultant firm have through collaboration developed a new type of gruel machine. The product is in its final stage of construction and is planned to be manufactured in a production located in Sweden, autumn of 2014.To compete against today?s trend in outsourcing manufacturing to low cost countries for better profitability, the industrialization of the gruel machine must be done with a minimum amount of resources in order to become successful, which also describes the problem of this study. Using pre-study material in form of Lean production literature, visiting a successful production site and gathering data from involved engineers a specification was developed which describes what this industrialization must achieve and which requests can be accomplished.

Smarta Elnät ? Modell och Marknad

The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

Denitrifikationsmöjligheter hos lakvattnet på Bredemads avfallsdeponi i Ljungby

I examensarbetet har möjlig denitrifikationshastighet för lakvattnet på Bredemads avfallsdeponi i Ljungby undersökts. Denitrifikationshastigheten har tagits fram i satsvisa och kontinuerliga försök där Reppos 40T och Brenntaplus VP1 har jämförts som externa kolkällor. De satsvisa försöken har genomförts i temperaturerna 15 °C, 20 °C och 22,5 °C och de kontinuerliga försöken har genomförts med reningsmetoden ?Moving Bed Biofilm Reactor? (MBBR) med bärare som hade en skyddad yta på 500 m2/m3.Denitrifikationshastigheten i g/(dygn?m2) med Reppos 40T var 0,45 och med Brenntaplus VP1 1,05. I reaktorn med Reppos 40T var fyllnadsgraden 48 % och denitrifikationshastigheten 4,5 g/(h?m3).

Hur kan mikroföretag bygga upp varumärken? : En studie av vilka faktorer ett mikroföretag kan använda vid uppbyggandet av sitt varumärke.

The purpose with this essay is to study how a micro enterprise builds a brand. This because the current situation makes it difficult to stand out from the vast amount of marketing messages available in the market without having an extensive marketing campaign. Small companies do not have the opportunity to put a lot of recourses as money into marketing as the large companies do. Neither do they afford to repair a brand failure.Brand building is a process that constantly is in progress in a company, large or small. To make this process concrete we have chosen to study the four factors; brand awareness, perceived quality, brand associations and brand loyalty.

Allmän barnvaccination mot humant papillomvirus för flickor, en cost- benefit analys.

Introduction: Every year about 450 women in Sweden are diagnosed with cervical cancer, almost 200 die and thousands undergo surgery because of cell changes in the cervix. A HPV infection can lead to cervical cancer and therefor costs for the society. The implementation of a vaccination program against HPV is a way to avoid these costs. Aim: The study aimed to calculate the economic impact of the HPV- vaccination program for children in Sweden through a cost-benefit analysis. Method: In this analysis, status quo was compared with non-administration of the HPV-vaccine for the selected cohort of ten-years-old girls in Sweden.

<- Föregående sida 32 Nästa sida ->