On the night of the 26th December 2011, large parts of southern Norrland were struck by the storm ?Dagmar? that caused serious damage to the forests. In the past 10 years wind damage has become a hot topic after several major storms. Forest companies own 25% of the Swedish forest and thus influenced largely by wind damage. The main purpose of this study was to examine whether forest companies attitude towards preventive wind damage actions were changed after the storm ?Dagmar?. The result was developed by doing interviews with two forestry companies.

This thesis deals with different methods for measuring moisture-related dimensional changes ofwood. Typically relative humidity is measured to determine if the ambient climate around anobject is harmful to it or not. Values between 40 to 65% RH are recommended for hygroscopicmaterials. To know how a wooden object actually reacts to changes in the surroundingenvironment requires methods that involve the object itself. Because of the wood anisotropy,differences in wood structure, finishes and other restraints, it is not always possible to predict themovements.This paper addresses various measurement methods, primarily methods that have been testedin the field of conservation, with examples of their use.

Wind and wind damage has become a hot subject because of the storm ?Gudrun? in January 2005. The main purpose of this study was to establish how the land owners attitude toward preventive wind damage actions was changing immediately after they had been struck by a storm. The result of the study was built on interviews. In springtime 2005 a total number of 20 private land owners were interviewed. Ten of the landowners lived in the province of Småland and ten in the province of Värmland.

ABB Surge Arrestors in Ludvika have for a long time had a problem to keep the moisture at a steady state in the production of their ZnO-powder, that is used to produce varistors.Some black-box models of the spray drying process have been designed and evaluated to find a solution for the problem. After evaluating the collected data it has been found that variations in the supply voltage causes control difficulties for the operator. A cascade control system was designed, consisting of three PI control loops designed with lambda tuning. The disturbance in the supply voltagewas used as a feed forward in the control system.At the end of the project the control system was installed, and tests were made to verify the functionality of the regulator. It was shown that most of the variations in the moisture of the powder could be eliminated using small resources, through purchase of a process controller and four power meters.

This thesis investigated the possibilities to resume cultivation of an old manor house built of timber and what this would mean from an energy and moisture perspective. The building in this case study is named Sofiedals mansion and was built in 1858 in Valbo 11 kilometers west of Gävle.The structure of the house was documented and used as a starting-point for carrying out calculations focused on energy and moisture aspects. With the help of a number of computer programs and a conducted air tightness test, the buildings energy consumption were calculated and compared with the current building regulations.In addition, the building was analyzed considering energy retrofitting and what it meant for moisture problems. The energy retrofitting consisted of additional insulation, decreasing the buildings permeability through air sealing; window and door replacements. When a building is equipped with natural ventilation it is difficult to know its precise performance and how an energy retrofitting affects it.

When I began my studies at Gammelkroppa forest school I started to think about an appropriate thesis. There was much discussion about the wild grazing damage during that period. I was at that time a part of Boo property and helped at their great hunts. They had the dual uses of wildlife and forest. I decided that I want to study how big the wild grazing damages are and if we can reduce them.

The moisture content in 10 deliveries of tree parts and 10 deliveries of wood residues were measured with different methods to analyze the quality of procedure used at Dåvamyran today. At the same time a survey was made on the measure procedures used at heating plants in Sweden The majority of the heating plants in Sweden use weight and moisture content as base for payment but at some plants only volume. The moisture content is usually estimated by drying wood chips in an oven but few plants a visual estimation is used. At few plants moisture content is estimated spectroscopicily. The techniques using near infra read light and other electromagnetic are still at a test stage. The methods of measurement used today are quit unreliable for the individual deliveries and there is a risk for systematic mistakes.

There are two species of voles that cause damage in Swedish fruit production: the water vole (Arvicola terrestris) and the field vole (Microtus agrestis). Both species make the most damage during the winter season. The water vole makes subterranean burrows and cause serious damage by gnawing on the tree roots. The field vole seldom makes burrows and gnaws the bark at the base of the tree trunk. In recent years there have been several reports about increasing vole damage.

This paper aims to describe the variation and develop a method to control the production for the product Metropol Kaktus from the snuff developer Fiedler & Lundgren. We are going to use the requirements from the product specifications as limits of the expected quality when we present methods to control the process. One method attempts to control during the process and the other attempts to maximize the number of products with strived quality before the process starts. Metropol Kaktus is a product produced with high quality, the mean weight is 20,023 gram and this is very close to the weight, 20 gram, which is reported in the product specifications. The variation in weight variable is less than what is reported in the specifications and the minimum weight is over the limit set by Livsmedelsverket.

Abstract (in English)The task for the diploma work was to develop methods for measuring of moisture content by the Karl Fischer method, in jam, jelly sweets, and fudge.The start premises was a for the company whole new equipment, which should be started up. Then programs should be developed for different kind of samples.In the task it was as well included to develop methods for dissolving the different kind of samples, since the Karl Fischer method demands completely dissolved sample material..

För att efterleva Regeringens miljöpolitik har Boverket tilldelats ansvaret för miljömålet God bebyggd miljö. Boverket är en myndighet som arbetar för Riksdagens miljömål och skall vid behov förslå åtgärder för miljöarbetets utveckling. I Boverkets Byggregler finns krav som måste följas för att uppnå ett fuktsäkert byggande. Som förslag på hur dessa krav ska uppnås nämns Svensk Byggindustriers metod ByggaF ? Metod för fuktsäkert byggande.ByggaF är en dokumentsamling med mallar, checklistor, kontrollpunkter och rutiner.

Serpula lacrymans infestation has become an increasingly common problem, and is usually perceived as a tip of an iceberg.During the 21st century there has been a perceived increase of damage caused by serpula lacrymans, at AB Mats Fransson Saneringstjänst ? Anticimex in the county of Kronoberg. A similar increase has also been noted by employees at the offices in Kalmar, Karlstad, Piteå, Stockholm, Malmö, Söderhamn, Halmstad and Visby.The methods used to collect data for the project has been interviews with a number, for the project, relevant key persons, such as analysis engineers at Trygghansa and Anticimex, as well as personnel at the botanical institution at Gothenburg University and the Botaniska Analysgruppen in Gothenburg, further statistics from SMHI and analyses of reported instances of infestations have been used.The majority of the people interviewed believe that the increase is caused by renovations of old houses, higher precipitation during the summer months, as well as a moister climate and warmer winters. The latter can also be gleaned from statistics from SMHI concerning temperature, precipitation, and relative humidity.Analysed damage reports show that the most common cause for the infestation is ground moisture, even when combined wooden materials.Older houses that where built around 1900 are the ones most frequently infested with serpula lacrymans. The part of the building most frequently infested is the foundation, where cellars and suspended foundation are the most common types to be infested.

A change towards using more biofuels than fossil fuels is taking place in Sweden, and in many other parts of the world. This makes the use of fuel pellets increasingly popular, causing a greater demand for sawmill sawdust products. There is a trend towards the use of multiple types of shredders, instead of a single type in each sawmill. The purpose of the study was to characterize the different flows of saw particles that can be found at Sävar såg when cutting thick or thin wood with different cutting techniques. The saw particles size, shape, moisture content and heat value were analysed by the cutting stations: first cutting fast and slow, second cutting fast and slow, grading fast and slow and planning.

This report compares two different types of insulation with regards to fire and moisture. The materials were tested for the company Fiskarhedenvillan AB, for a wall and a roof construction that the company currently uses in the establishment of Sweden's first certified passive house for international standards.Their current material, Rockwool, is compared to a relatively new material on the Swedish market called SEALECTION Agribalance sold by the company ISO Green AB. The material is a type of polyurethane insulation. This insulation material would result in a more efficient execution of the construction as it provides waterproofing and is applied more easily than Rockwool. From a fire standpoint, literature studies and discussions with fire experts led to results.

Bark-stripping by red deer (Cervus elaphus) cause extensive damage to economically valuable spruce trees (Picea abies) in Swedish forests. The underlying causes for bark-stripping are not fully understood, and the frequency and severity of damage unpredictably differ between regions. In this study, I investigated if landscape structure (e.g. agricultural dominated landscape opposed to forest dominated landscape), forage availability, population density and disturbance (e.g. roads and settlements) affect bark-stripping frequency.