This is an investigation of a mobile prefabrication factory´s competitiveness and profitability which also will result in a suggestion for a design of the factory. The mobile prefabrication factory is an idea of a new concept for production which is meant to be used in the manufacture of slab. The main intention with this concept is that by using a fast established prefabrication factory to produce elements near the construction site, thus avoiding transport from the factory to the building site. This means not only an environmental and economic gain, but also that you can avoid risking damage the elements which often occur during transportation. The contractor is owner of the mobile prefabrication factory and can thus avoid long waiting times and cyclicality.

Works on transparent paper, also commonly known as tracing paper, have been described as ephemeral or temporary working documents and they usually number large quantities in archival and museum collections. They have therefore previously been considered of lower priority and can be found in poor condition due to a lack of treatment or suitable storage prospects. In addition, transparent paper can be very sensitive to moisture and reacts by deformation or loss of transparency. Due to the volume of these works and the necessity of treatment, there is a call for simple and efficient conservation methods. A common solution in archives for the treatment of water-sensitive works on paper has been the use of heat-activated tissues as they can be applied without the introduction of solvents. There is little published about the use of heat-activated tissues on transparent paper and is mentioned only briefly in existing literature.

Staphylococcus aureus belongs to the normal flora. Many healthy people are colonized by the bacterium mainly in the nose but also on the skin and on other mucous membranes without showing symptoms. After damage to the skin, the bacterium can enter the wound and cause infections. Methicillin-resistant S. aureus (MRSA) is resistant to b-lactam antibiotics such as penicillin and methicillin.

The project has been performed in a close collaboration with Hörsam who works in the field of hearing technology. In a first meeting with the company, the Project group was showed a few existing storage boxes for hearing aids. The company thought they were unnecessarily large with plenty of unused space and wanted a new, smarter solution to be developed.The project began with user studies in which audiologists, maintenance technicians, future users and others were interviewed. The purpose was to obtain their views on today's storage boxes and to find out how well the users maintained their hearing aids. It proved to be a large lack of knowledge regarding the management of hearing aids within the users.

I Sverige finns det ungefär 475 000 hektar skogsmark där den från Kanada introducerade contortatallen (Pinus contorta) utgör mer än 65 % av den totala grundytan. Genom aktiv skogsanläggning har P. contorta blivit Sveriges sjunde vanligaste trädart sett i ett volymmässigt perspektiv. Därför är det av stor vikt att ha god kännedom om hur arten sprider sig i det svenska skogsekosystemet. När P. contorta introducerades ansågs den sakna förmåga att självsprida sig (fröså sig), men senare visade det sig att andelen serotina kottar varierar mellan olika träd och att den kan självsprida sig på produktiv skogsmark. Resultatet av studien visar att P.

I mars 1999 inledde NATO operationen Allied Force i dåvarande Förbundsrepubliken Jugoslavien. Operationen blev kritiserad för att ha tillfogat s.k. ?collateral damage? och vissa ickestatliga organisationer hävdade att brott mot krigets lagar begåtts.Specifika dokument, som reglerar luftkrigföring, har historiskt sett saknats. Detta har inneburit problem för bedömningar av enskilda fall.

For many decades the increase in traffic volume, expansion of highways and infrastructure has lead to an increase of wildlife vehicle collisions which are unfortunately very common in many countries today. They cause great deal of material damage and even kill humans or wildlife. Measures in the form of warning signs, under- and overpasses and fencing have been implemented for a long time with the help of observation by hunters and collisions sites. However this study focuses on the moose?s perspective and the variables that, both spatially and temporally, could have an effect on why and when moose are close to certain types of roads.

The survey is a qualitative study that aims to investigate the ethnic housing segregation in the residential area around Malmvägen that is located in Sollentuna. Malmvägen is a millionprogramarea that?s made up of unattractive tall buildings with grey facades. The majority of the residents have foreign backgrounds and the unemployment rate is high among the youths in the area. The apartment rents on Malmvägen are low and many of the residents belong to the subclass of society.

The aim of this examination project was to work with the processof making a pattern collection for fabrics. The collectionshould consist of at least three patterns with report measurementssuitable for screen print. I wanted the pattern collectionto be a simple, mystic and colourful collection with a folklorespirit like the popular rural life I experienced during my childhood.The purpose of the project was that I during the working processwould deepen my estethic background to enforce my personalgraphic expression ability and evolve as a pattern designer.I wanted to try to mix my personal view of domestic graphicexpression with another language that I gained in recent years.This I wanted to do in order to find the tools that could helpme clarify and develop my pattern signature.A few of the questions that I had about this project were if thelong scetching phase that I planned would help or damage theproject.I also thought it would be interesting to experiment with coloursin this project. I wanted to see how far I dared to go inmatter of colours as well as how the patterns would be visuallyexperienced if I for example reduced one colour or replaced itwith the opposite colour.I thought it was inspiring to work with traditional techniqueswith the colours. It was only positive that part of the patternstory telling was developed in an unpredicted direction duringthe scetching phase.

Transdermal drug delivery, besides painfulinjections with syringes, has long been associatedwith small size particle pharmaceuticals, which candiffuse through the skin. This method of drugadministration has only been applicable on a smallnumber of drugs, where active molecules are smalland delivery time should or can be long.Other drug delivery options are oral administrationand injection with hypodermic needles (ordinaryhospital syringes). In oral administration thestomach and liver tend to dissolve the drug and theeffect becomes more difficult to anticipate, anddrug delivery rates difficult to control. Hypodermicneedles are used as a mean of drug injectiondirectly into the bloodstream. This method ispainful and risks infection due to tissue damageand skin penetration.One way to get a painless non-damaging techniquewith high delivery rate that still can delivery largemolecules is to manufacture an array of microscopichollow needles and equip them with a pumping unitthat delivers the correct amount of drugs.This thesis shows the technique and possibility ofmanufacture micromachined needles using low costtechniques of Ion Track Technology (radiation ofheavy ions creates porous materials), electrolessdeposition (non-current activated wet chemistrymethod of depositing metal) and electroplating.

This report deals with prefabricated bathrooms and the advantage, during the production process, they have compared to ordinary produced bathrooms.The work is done together with the building company JM. The common task is to investigate if the manufactures, in spite of standardized design can meet the concept of JM, i.e. high flexibility and adjustment towards the customer. In JM they are doubtful to the method, as they did not yet worked with prefabricated modules and think that the choises for the costumer will be limited.There will be a short resume of the progress of the bathrooms and its importance as sanitary and wellbeing.The recent problems with damage caused by damp in bathrooms. Have resultade in regulations.

By our employer Camatec Industriteknik AB have we been given the assignment to continue with the previous work ?Design of strip feeder?. Our goal with this work is to come up with a design basis for a strip feeder.Functionally a strip feeder consists of two rollers which with the aid of the friction between the strip and the coating on the roller create a strip force that pulls the strip through the working progress.Demands on this project:? 10 ? 600 mm in strip width and 0,1-1 mm in strip thickness.? Minimum 30m/min in production speed.? A maximum strip force on 30-40 kN.? The cost of the strip feeder?s components is to be considered of economy and quality.The need of a strip feeder occurs when the coil doesn?t manage to feed or pull the strip before or after a working process. The strip can otherwise be exposed by a permanent yield deformation or a change in the strip material if it?s pulled trough the working process only by the on ? and of-coils.

The Swedish industrial society has left several areas with contaminated soil and water which today is of danger for the environment and human health. One of these areas with contaminated soil and water is the region where the former Glava glassworks operated during 1859 to 1939. The main object in this study has been to study the responsibility for the contaminations according to the Environmental Code. The method used is a qualitative content analysis of relevant literature to answer the following questions:What types of contaminations can be found in the area of Glava glasswork and what health issues can these cause?What kind of activity has been conducted in the area that have caused the contaminations in soil and water?According to law, what are the responsibilities for the contaminations in soil and water at Glava glassworks?The contamination in the region has been confirmed to originate from the glasswork due to the environmental engineering survey made in the area in 2009.

Due to better nutrition, veterinary and overall care, pet dogs? lifespan has increased. With more old dogs we see more health problems associated with age, among those cognitive decline, leading to deficits in learning and memory, disorientation, anxiety and other altered behaviors. Cognitive decline can have severe negative impacts on the life of both dog and owner, when the dog for example forgets being housetrained or starts being awake at night. Two pet food manufacturers have developed food with specific ingredients in order to improve cognitive functions or delay the onset of cognitive impairment. Hill?s Pet Nutrition has developed a dog food with supplements of a broad spectrum of antioxidants and mitochondrial nutrients, aiming to diminish oxidative damage in the brain, thereby maintaining brain function and improving learning ability.

Buildings today are built to maintain a healthy indoor environment and an efficient energy usage which is probably why damages caused by dampness has increased since the 1960?s.A study between year 2008 and 2010 showed that 26 percent of the 110 000 examined houses had damages and flaws caused by dampness that could prove to be harmful later on. This means that one out of four bathrooms risk the chance to develop damages by dampness. Approximately 2 percent of the houses had already developed water damages. It is here where the problems appear.