The modern silvicultural practices of today, with cutting by compartments, have led to a large benefit for the moose population through the cleared areas which produces large amount of fodder. This new landscape can produce and feed a large moose population. But it will cause a conflict effect towards the landowners; the conflict consists of browsing mainly in the young pine forest. The result from browsing and damage will be sparse stands with reduced growth and technical damage like leader shoot browsing, stem breaking and damage of the bark. Technical damage can kill the tree or damage it so hard that it would not work as future saw timber.

Today's fierce competition means that companies constantly must develop their business and internal processes. Focus on processes and continuous improvement is something that characterizes Lean Production which ICA logistics are applying with their concept Leading Logistics. Standardized routines for handling damaged gods were insufficient at the ICA distribution center in Kungälv. Handling and registration of damaged gods were not performed uniformly, resulting in problems with controlling and monitoring the process.The purpose of this thesis was to analyze and make recommendations how the process of internal handling of damaged gods could be improved. Therefore a comprehensive understanding was needed of the entire material flow through the warehouse and important quality aspects such as product safety and delivery reliability.The methods used are literature reviews, interviews and observations to produce a comprehensive process mapping of the current situation at the distribution center.

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

In this Bachelor Thesis (20 p.), we present the history and development of "Intelligent Houses", and most important- explore some of the future possibilities in this area. The project has been carried out through an interdisciplinary cooperation between three different educations at the Blekinge Institute of Technology. By conducting a dialogue with various actors with different professions, we have been trying to identify needs within the concept of "Intelligent Houses", were the end user is not only the tenant or homeowner. Through Participatory Design methods, such as a Future Workshop, we have brought the users together to discuss their own and each others needs and hindrances in their respective work practice, and how intelligent house technology could improve their work conditions. We have also been testing a highly sophisticated CO/CO2/Moisture/Temperature/Enthalpy multi-sensor & controller, originally developed for regulating indoor climate systems.

Elefanter är och har varit mycket hotade genom tiderna men har börjat öka i antal på grund av kontroll av tjuvskytte, förbud av elfenbensförsäljning, samt en förändring av såväl mänsklig utbredning samt regn mönster, och flera nationalparker upplever nu ökade skador på grund av rikliga elefantpopulationer, det så kallade elefantproblemet. Det finns sen 30 år tillbaka rapporter från östra och södra Afrika om minskning av Acacier och andra kapellträd på grund av elefantbetning. Några av dessa skador kan till och med leda till lokal utrotning av vissa arter. På grund av detta finns det en konflikt inom bevarandeprogram mellan att bevara livskraftiga elefantpopulationer och bevara den biologiska mångfalden i växtriket. Syftet med denna studie var att se om det fanns något problem med elefanter i Masai Mara Nationalreservat, Kenya, genom att göra en beteendestudie om deras matvanor och jämföra skador på de två träden Acacia gerrardii och Balanites aegyptiaca.

The use of renewable resources is rapidly increasing in Sweden, especially the use of fuel pellets. Through pelletizing the energy content per volume unit is greatly increased and the pellets are more homogeneous with regard to moisture content, particle size and density compared to unrefined fuels like forest residues and chips. For further development of the Swedish pellet industry, the use of different assortments from lodgepole pine (Pinus contorta Dougl. var. latifolia) is of particular interest, mainly because of its high volume production.

Ungulates are causing conflicts between stakeholders due to browsing damage on forests and agricultural crops. At the same time there is a big demand of keeping high ungulate densities for sports hunting and recreational purposes. Movement patterns of ungulates are strongly correlated with forage availability. Therefore, measures affecting forage quantity and distribution might be a tool to reduce the economical losses in forestry without decreasing the ungulate densities and thereby decrease the conflict between different interest groups.This study investigated the potential biomass production and utilisation of marrow-stem kale (Brassica oleracea var. medullosa), at game fields in Misterhult, Sweden, as well as browsing effects on adjacent forests.

This thesis conducted at the University of Uppsala investigateshow well a prefabricated building component from the manufacturerMasonite Lättelement AB can be incorporated into ahouse projected to accomplish the demanding criteria of a passivehouse. The thesis is organized as a comparison betweenthe prefabricated elements and an on-site built component fromthe passive house area of Oxtorget in Värnamo, Sweden. Theaspects investigated were air leakage, energy, moisture, economyand noise conditions.Results of the comparative analyzes shows that the prefabricatedproducts were capable of accomplishing the requirementsof passive houses and therefore this thesis should beviewed as a basis to confirm that the technology of prefabricatedbuilding components today in Sweden are mature enoughto be a significant part of the passive houses that are to be builtin the near future. The development of prefabricated technologyis of crucial significance if we are to accomplish the goalsof reduced energy consumption by the year 2020..

Title: Veingeskolan F - Investigation of the indoor environment and a structural analysisMethod: Complete analysis of structural drawings to determine if the school have been constructed correctly. In my teorethical studies of the drawings I must seek out points that may have been damaged from moisture, this contains a full survey of the foundation, walls and ceiling. To strenghten the data collected from the drawings I must visit the school and do field investigations to find out if the school has any problems with the indoor environment.Analysis: I determined that we had some damages on specific places, these damages was caused by leaking roofs, a carpet that was tarnished by strong sunlight in connection with some type of glue and also the ventilation that may have been drawing malodorous air from a shaft in the foundation.Conclusion: I was able to see that the decision to demolish the school was quite drastic, if the county would have done continuous fixups on the construcion when the employes had complained maybe the action to the tear the school down would have been unnecessary. The lack of communication between the two parts lead up to the decision to demolish and build a complete new school..

During the last part of the 20th century many companies has started to build their organizations on knowledge and information instead of manufacturing of products.  Today it is easier to communicate and spread information. At the same time the numbers of untraditional employments like temporary employments and workers from staffing agencies are increasing. Many organizations have higher employee turnover now than before. This allows more people to have access to confidential information, whose spreading might cause great damage for the employer.

The task for this thesis is to design a tool that is used to cut-out preforms of thermoplastic adhesive and also to make an estimate of costs for the stamping tool. The tool is used in the repair process at the MCM production line. The result of gathered information has affected how the design of the stamping tool has developed. The handling of thermoplastic adhesive in the repair process is one of the factors that influenced the design. The adhesive is sensitive for exposure to moisture. Therefore an automated feeding system of the adhesive is not recommended. The users wished for an automated stamping tool.

Executive summaryThe aim of this study is to examine how the favourability and brand exposure of Norwegian has been damage by their supplier, Boeing 787:s, problems concerning the aircraft Dreamliner. The theoretical framework underlies the content analysis that has been used to operate the study. In total the empirical data rise up to 623 articles that has been collected and analysed from the media archive Retriever. Compares to before and after Boeing 787:s problem with the Dreamliner, the results indicates that the favourability of Norwegian in the Swedish media landscape during the problems was negatively affected. The results also show that there was no increase in brand exposure for Norwergian during the problems.

In this Bachelor Thesis (20 p.), we present the history and development of "Intelligent Houses", and most important- explore some of the future possibilities in this area. The project has been carried out through an interdisciplinary cooperation between three different educations at the Blekinge Institute of Technology. By conducting a dialogue with various actors with different professions, we have been trying to identify needs within the concept of "Intelligent Houses", were the end user is not only the tenant or homeowner. Through Participatory Design methods, such as a Future Workshop, we have brought the users together to discuss their own and each others needs and hindrances in their respective work practice, and how intelligent house technology could improve their work conditions. We have also been testing a highly sophisticated CO/CO2/Moisture/Temperature/Enthalpy multi-sensor & controller, originally developed for regulating indoor climate systems. Based on the needs we have found in our fieldwork, we have been looking at possibilities to make multi user solutions with the sensor..

The study aims to illustrate how women victims of male violence in intimate relationships are treated during the legal process and with professional perspective describe what women?s experiences considered to be in the legal process. The study also aims to draw attention to the interventions for abused women during the legal process.The results are based on interviews with professionals in the justice system, and on observations in the courtroom. Overall our results show that abused women are in need of a great quantity of help and support before, during and after the negotiation. The legal process is very stressful for the women.