The aim of this work was to study if the edge of the forest is more resistant to heavy winds than the trees located further in from the edge, and how this edge effect changes between different types of tree species and site types. The data was collected from an electric power line going from the north to the south of Sweden. The mean value of the clearcutted area around the power line was 120 meters. The main direction of the storm in January 2005 was west-southwest and thus the power line was a perfect place for gathering a large data set. The main parameter studied was the damage frequency at the edge of the forest compared to the trees located further in from the edge (up to 100 m from the power line). Tree species mixture, soil moisture class, soil type, topography, stand height, stand height of the stand on the other side of the power line and wind exposition was estimated. The results showed a distinct edge effect. The edge of the forest had clearly lower damage frequency for all tree species. A marked difference was observed between tree species and damage frequency.

 This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

 This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

In this study my aim has been to discover what connections can be made between the way of creating a library building and the general values concerning the library activities and the library users. What kind of ideology could possibly be reflected in a library room? My study includes two different parts. First of all there is a theoretical section based upon literature relevant for the subject. Here I try to focus on the libraryÕs role in society as a public room.

This report is a bachelor thesis work in the field of product development and design. The assignment has been to develop a solution for roof racks, normally used for cars, to fit on the open trailer models FS1425 and Alugance. The project was implemented by Johan Andersson and Victor Karlsson, students at the Mechanical Engineering program with a focus on product development and design at Jo?nko?ping?s school of Engineering, in spring 2012.The client wants to use transport solutions in the same way as roof racks on cars. The user of such a product is assumed to desire simplicity, safety and an attractive design with an appealing price, which has been a challenge during the thesis work.Pre-studies have been conducted to examine the potential competitors and gain knowledge in the research area.

The municipality of Enköping is presently working out a new layout plan for the town of Enköping and new residences are planned in the harbour area. Because of these plans, the municipal energy company ENA Energi may have to move its location from the harbour to another part of the city.The aim of this degree project is to investigate the possibility of building a new CHP plant in another area of Enköping. The future demand on district heating and infrastructure at the new location have been projected. A new CHP plant has been dimensioned and economic analyses concerning the project have been made.Results show that the future demand of district heating in Enköping will differ a little from the present needs. In 2030, the district heating production is expected to be c.

The purpose of this master thesis is to examine the opinion about school libraries among principals at the independent schools in the municipality of Lund. In order to fulfil my purpose I used a qualitative method with an introductory questionnaire, which gave background material to the interviews. All seven principals answered the questionnaire and five of them agreed to participate in an interview. Another two interviews were made with two informants, this material was included in the background material. As theoretical framework I have used literature about the school library development, the role of the principal for development and David V.

An analysis of a specific application of anaerobic wastewater treatment at a pulp and board mill, Stora Enso Skoghall, was carried out. A literature study was done and effluent wastewater from CTMP pulp production was analyzed. The analysis consisted of a broad constituent analysis and an anaerobic treatment trial. Results from these test where used to calculate the treatment effectiveness and resulting energy potential at the mill.The literature study and constituent analysis showed that toxicity of the water to be treated, due to wood extractives and sulphur content, was of concern. Detoxification chemicals targeting these constituents where used in the anaerobic treatment trial.

Tree fiber lengths controls properties like strength and smoothness in paper and other wood products. For forest researchers it is of interest to be able to determine the fiber lengths in standing trees. Mo?rling et al. (2003), among others, have developed methods to estimate fiber length distributions in standing trees without damaging them.

This thesis is a product development project that was performed at Alfa Laval Tumba AB. In the past Alfa Laval have manufactured gas separators for engines where gas flows were cleaned from oil. A new business area for this kind of technology has shown to be the manufacturing industry where oil mist has to be separated from the vented air. Therefore a new and bigger design is needed to be able to handle the greater gas flows. A product like that would be a strong competitor on the market when the maintenance would be low in comparison to today?s equipment.During the project several concept suggestions were developed using customer interviews and research as input.

I dagsläget dimensioneras bullerskärmar efter varje projekt med den enda gemensamma nämnaren att de skall uppfylla utformade riktlinjer och bullerkrav. De kan skilja sig enormt vad gäller estetisk utformning och konstruktion. Denna arbetsgång är både tids - och kostnadsineffektiv med konsekvenser som följd, framförallt då externa arkitekter anställs för att sätta sin egen prägel. Uppgiften har utdelats gemensamt utav Trafikverket och Peab som ser ett behov utav standardiserade bullerskärmar. Slutsatsen har dragits utav tidigare projekt och då framförallt projekt Mälarbanan.Denna rapport syftar till att, med utgångspunkt Mälarbanan, ta fram ett förslag till ett standardiserat system som skall kunna användas runt om i Sverige.

The purpose of this study has been to evaluate whether a Low temperature bio-mass dryer could be integrated with the local district heating system in Malå. The aim is to increase the thermal efficiency of the cogeneration plant in Malå, by lowering the temperature of the cooling medium. Another benefit that comes from this is improved combustion efficiency at the power plant, since drying the fuel causes an Increase of the heating value.Simulations has been made in Excel, and with use of linear regression, to find out if it is profitable. Data for this purpose has been supplied by the power company Skellefteåkraft and furthermore SMHI.The result of the Calculations shows that a very efficient bio-mass dryer is needed, if yield of investments should be made possible. An Investment of 4,27 Mkr, in a dryer, could at a such criterium return 60000 kr/year, if the price of the biomass is 190kr/MWh.

The public sector has through the years been exposed to a rather radical alteration. The aim with this alteration has been to make the public sector more effective. It?s a dynamic society that Norrbottens läns landsting (NLL) operates in today and it is therefore of great importance that the managers get a solid foundation to rely on, since they have a central role in the ambition for efficiency. Another reason to educating the managers is that NLL can secure the future pension losses.

Tree fiber lengths controls properties like strength and smoothness in paper and other wood products. For forest researchers it is of interest to be able to determine the fiber lengths in standing trees. Mo?rling et al. (2003), among others, have developed methods to estimate fiber length distributions in standing trees without damaging them.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.