This paper explains the basis for impartial games and the classicgame Nim. Nim is complicated by a Modular Muller twist and thesolution for this game is described by a simple theorem. The ModularMuller twist means that at the end of each move the player selects a kand the number of sticks the next player leaves in the pile, where thedraw is made, must be congruent with k modulo m. The number m isfixed throughout the game..

Due to a growing interest in communication in today?s society the demand for equipment that is used in communication networks increases while the competition between companies that produce this equipment grows. To meet the increasing demand and at the same time having a competitive product development many companies use some effective product design, such as the Modular product design. When a Modular product design is used it?s good to compare different module configurations for a certain product and to simplify these comparisons some tool can be used.

SammanfattningModular Management AB (MM) är en konsultfirma som arbetar med att implementera Modulära produktarkitekturer hos produktutvecklande företag. Företaget grundades i Stockholm år 1996 där huvudkontoret ligger än idag. De är världsledande inom sin genre och på grund av stor efterfrågan har kontor uppförts även i USAoch i Kina.Detta examensarbete är utfört på uppdrag av MM och har genomförts med hjälp av deras kunder i Finland samt kundens CAD-leverantör. Det behandlar Modularisering och hur detta realiseras med hjälp av datorbaserad konstruktion (CAD). Detta är en MMs produkter och den kallas Modular Modeling.

Syftet med detta projekt är att utvärdera ModFix som verktyg och arbetsmetoden för att skaps fixturer med ModFix. ModFix är ett verktyg som är integrerad i Siemens simuleringsmiljön Process Simulate och används för att skapa modulära fixturer. Målsättningen med arbetsmetoden där fixturer skapas med ModFix är att ledtiden och mantimmarna för att skapa fixturer ska reduceras med 50 % i jämförelse med Volvo Cars nuvarande arbetsmetod där fixturer skapas med Catia V5.ModFix-verktyget består av tre funktioner. Dessa funktioner är; Configuration Administrator, Fixture Designer och Modular Fixture Mapping Report. Configuration Administrator är ModFix´s administrationsverktyg och används för att skapa de fixturbaser och fixturkonfigurationer som senare används för att skapa modulära fixturer med Fixture Designer.

This report is a bachelor thesis presented at the department of Computer Science andEngineering at Chalmers University of Technology. The aim for the project is to find a simplemethod to measure and display physical quantities in a three dimensional room.The report describes a method to construct a system for measuring differentphysical quantities via sensors. The system must be built in a Modular and expandable way tobe adaptable to different tasks.The system explained in the report consists of two parts;A physical scanner with moveable probes for carrying sensors and a microcontroller forcontrolling the probes and communicating with the next part.An application written in Java for storing the measured values and presenting them in a lucidperspective.It is possible to construct the scanner with different designs and circuitry, with multiplexers andflip-flops, to ensure that an unspecified number of probes can be added to the system and thatthey can be operated simultaneously.The Java application is written in a Modular way, using a design pattern that separates eachindividual part of the application. It contains exceptions and interfaces that ensure a safe andexpandable application..

This report is a bachelor thesis presented at the department of Computer Science andEngineering at Chalmers University of Technology. The aim for the project is to find a simplemethod to measure and display physical quantities in a three dimensional room.The report describes a method to construct a system for measuring differentphysical quantities via sensors. The system must be built in a Modular and expandable way tobe adaptable to different tasks.The system explained in the report consists of two parts;A physical scanner with moveable probes for carrying sensors and a microcontroller forcontrolling the probes and communicating with the next part.An application written in Java for storing the measured values and presenting them in a lucidperspective.It is possible to construct the scanner with different designs and circuitry, with multiplexers andflip-flops, to ensure that an unspecified number of probes can be added to the system and thatthey can be operated simultaneously.The Java application is written in a Modular way, using a design pattern that separates eachindividual part of the application. It contains exceptions and interfaces that ensure a safe andexpandable application..

This thesis aims to develop proposals and models for a Modular electronics construction to a future D250S Dual battery charger. The aim also includes investigation of possibilities to use some of Texas Instruments C2000 microprocessors. The reason for this is that CTEK SWEDEN AB wants to renew the present D250S Dual battery charger and lower the manufacturing costs. The thesis work has involved gathering theoretical facts for the development of a design on the Modular electronic construction, the choice on which microprocessor to use, the choice of electronic components and facts about peripheral equipment to the D250S Dual. With the theoretical there has been developed different solutions to the proposed hardware and software solutions with comparisons in aspects of positive and negative.

Abstract The purpose of this project is to develop a Modular processor card which is intended to work as a platform for Kitron Development Karlskoga. The Modular processor card is meant to be used as a control system in development projects, mainly in medical and industrial products. The processor card will consist of a central unit with the basic functions for a control system. Furthermore there will be complete modules with machine commodity and programming, to pick exactly the necessary functions for a specific application. With consideration to the specification of the development and the main unit, I chose an adequate microprocessor (AT90CAN32) as core and interface circuits to stated border areas. The construction is first completed in the program MultiSim and then remade in the program OrCAD Capture. The programming language C was used in the software model.

This report is a bachelor thesis presented at the department of Computer Science andEngineering at Chalmers University of Technology. The aim for the project is to find a simplemethod to measure and display physical quantities in a three dimensional room.The report describes a method to construct a system for measuring differentphysical quantities via sensors. The system must be built in a Modular and expandable way tobe adaptable to different tasks.The system explained in the report consists of two parts;A physical scanner with moveable probes for carrying sensors and a microcontroller forcontrolling the probes and communicating with the next part.An application written in Java for storing the measured values and presenting them in a lucidperspective.It is possible to construct the scanner with different designs and circuitry, with multiplexers andflip-flops, to ensure that an unspecified number of probes can be added to the system and thatthey can be operated simultaneously.The Java application is written in a Modular way, using a design pattern that separates eachindividual part of the application. It contains exceptions and interfaces that ensure a safe andexpandable application..

Mobila verksamhetslokaler erbjuder flexibel lokalförsörjning som alternativ till permanent utbyggnad, eller under tiden som befintliga lokaler renoveras eller byggs om. Denna flexibla möjlighet används dock i en ganska liten omfattning på marknaden. För att öka lokalernas användning finns det därför ett behov av en marknadsundersökning som identifierar de faktorer som kunden värderar.Utredningen syftar till att få fram vad kunden värderar då han eller hon hyr och/eller använder en temporär lokal, och möjligen identifiera nya element som inte finns i marknadens utbud.För att få fram värderingsfaktorer har en litteraturundersökning implementerats och samtidigt har 13 personliga intervjuer genomförts. Intervjuer skedde med personer som använder dessa lokaler och parallellt de som tecknat kontrakt för att hyra dessa lokaler. Studieobjekt är kontor, skola och förskola..

Detta projekt utfördes som examensarbete för högskoleingenjörsexamen i innovationsteknik och design, 22,5 högskolepoäng, vid Karlstads universitet. Som uppdragsgivare stod Reminiscor AB. Uppkomsten av projektet låg i en förfrågan från företaget att utveckla ett moduluppbyggt pedalbord för gitarrister.Det här produktutvecklingsprojektet genomfördes med användarkrav och användarönskemål i fokus för att definiera lämpliga funktioner för och utformning av ett modulbaserat pedalbord. Arbetet inleddes med att undersöka utbudet av olika typer av pedalbord och effektpedaler på marknaden. Intervjuer med gitarrister i olika åldrar och från olika genrer genomfördes för att skapa en uppfattning om gemensamma krav och önskemål som kunde ligga till grund för det fortsatta arbetet.

The purpose of this thesis is to examine how key performance indicators are being used as performance management tools within the production industry. Specifically the purpose is to investigate how the KPI:s within the telecommunications industry drives reusability regarding production test systems. This thesis will also highlight today?s cost models and suggest improvements of the KPI and what new ones could be introduced. A case study at Ericsson AB has been performed.

Neoplasm 2.5D, is a project centered around exploring possibilities of combining various digital tools with the use of a lasercutter, to create intricate patterns withillusions of depth and texture, and to combine these studies into a working fullscale model that could be the basis for a future design product..

The purpose of this thesis is to examine how key performance indicators are being used as performance management tools within the production industry. Specifically the purpose is to investigate how the KPI:s within the telecommunications industry drives reusability regarding production test systems. This thesis will also highlight today?s cost models and suggest improvements of the KPI and what new ones could be introduced. A case study at Ericsson AB has been performed.

The purpose of this project has been to cut production costs for the fascia panels ofGetinge?s largest autoclaves. The cost for the stainless steel plates currently used is veryhigh. An alternative material solution could cut costs significantly.In addition, improvements have been made to the instrument tower which is a central partof the fascia panel. As a result of the new Modular design in a new material theinstrument tower has been improved in several aspects..