How can a vacuum cleaner motivate you to use it? From a sustainability perspective,the author asked the question of how such a solution would looklike? These where issues that the project tackled and devised solutions for. Theproject wanted to explore the physical modeling and a large part of the finalresult consisted of a full scale model. The project found that the problem ofvacuuming largely consisted of the problem of storage the product. The projectfound that the motivation for the job, therefore, could be resolved by a betterdesigned vacuum cleaner with a built-in hose, folding handles, which couldbe stored integrated within the vacuum cleaner.

Companies in the apparel industry are becoming increasingly responsible with regards to the social and environmental issues related to textile production. Despite these tendencies, there are great insecurities surrounding the concept of CSR and the effects on consumers of CSR communication. There is currently no model for breaking the concept of CSR down into smaller elements, specific for the apparel industry. In the first part of this thesis, we create such a model, applicable in a consumer communication context. In the second part, we investigate the effects on consumer attitudes and intentions of communicating the different elements of CSR presented in the model.

The society strives for sustainable development, in the construction industry it is expressed through sustainable building. Energy and LCC analyzes increases the ability to make conscious decisions in the process. A problem in the construction industry is that energy and LCC analysis is not used to the desired extent, as they are perceived as complicated and time consuming. The report aims to achieve a more sustainable building through increased use of energy and LCC analyzes.The goal is to show how BIM can be used to improve the efficiency of the energy and LCC analyzes.The study was conducted with a literature review and a case study to answer which information that is required in a BIM model to perform energy and LCC analyzes. The study also shows which software can be used in BIM based energy and LCC analyzes and how the analyzes can be carried out efficiently.The result shows that effective analyzes may be performed if the BIM-model contains the relevant information for making analyzes.

Objective: In recent years there has been an increasing interest within the clinical (medical) science in measuring people?s health. When estimating quality of life, present practise is to use the EQ-5D questionnaire and an index which weighs the different questions. The question is what happens if the individuals estimate there own health, would it differ from the public preferences? The aim is to make a new prediction model based on the opinion of patients and compare it to the present model based on public preferences.Method: A sample of 362 patients with unstable coronary artery disease from the Frisc II trial, valued their quality of life in the acute phase and after 3, 6 and 12 months.

Denna studie ville undersöka om en viss bild i det perceptgenetiska testet DMTm (Defense Mechanism Technique modified) kan vara på väg att bli omodern. Flickan i bild K1 (som visas för kvinnor) skulle idag kunna misstas för en pojke. En design med två beroende grupper på 30 män i varje användes. En grupp såg M1-bilden med en pojke och den andra såg K1-bilden med en flicka. Syftet var att undersöka om det fanns någon skillnad i gruppernas förmåga att korrekt kunna identifiera barnets kön.

This thesis explores strategic communication management within the non-profit sector. Communication models need to be adapted to the specific sector as different sectors require different approaches of strategic communication management. In the spring of 2013, the non-profit organization Save the Children Sweden initiated a communication model based on volunteer communicators. The following study explores how non-profit organizations can manage communications with a focus on volunteers as a communication resource. The applied research questions concern how volunteers may be integrated into communication activities, the opportunities and challenges connected to involving volunteer communicators and how this may affect the role of the organization's employed communicators.

Performance of an intersection affects the total travel time in a traffic network. An intersection with good performance can easily be described by its contribution to lower travel time than in a comparable intersection. The travel time is of importance in the cost calculations when a specific intersection is to be chosen and designed. It is important to be able to make correct and precise performance calculations so that the cost calculations will not be incorrect. For that purpose the software Capcal, which is a traffic model for intersection analysis on performance, is used in Sweden.

There are several methods and models within the areas of software engineering on how to proceed during a software development process. For each of these methods and models there are benefits and drawbacks, depending on how you choose to look at them. A difference of principle between the different models is that they either advocate iterative development or not. In parts of software engineering one makes use of different methods depending on which is most fitting in a specific situation. There are several methods on how to recieve more qualitative data from the end-users during the requirement collection, but the reappearing pattern is still user centric participation, which means that the user participates more actively in part of or the entire development process.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

In a dynamic and unpredictable reality, either rigid structures or silo architectures areappropriate ways to organize an agile organization. This thesis enlightens these relationsbetween Service Oriented Architecture (SOA) and an organization who acts in a varied andconstantly changing business environment. In other words, this thesis enlightens the question:?How suitable is SOA to organize the enterprise who will meet a constantly changing andheterogenic business environment?.The thesis presents a model where an efficient organization must be agile to be able to actquickly in the business environments with constantly changing desires, needs, expectations,desires etc. According to the same model a Service Oriented Architecture organizes theenterprise elements such as processes, resources, competences, responsibilities, informationsystems etc.

An information audit identifies, among other things, organizations information resources, the information flow and the needs of the information users. The purpose of this masters thesis was to describe the management of information within a local unit of Borås municipality by putting an information audit-method in practice. The focus was on three issues: What information needs could be seen in the organization? How does the information flow through the organization? How does Sugan Henczels seven-stage model serve as a tool to map the management of information within the local unit? The study only described the situation at a certain time at the chosen organization. The seven-stage information audit model was revised and adjusted to the studied organization by only carrying out four of the seven steps: Planning, Data collection, Data analysis and Data evaluation.

In this textual analysis I have examined the book Att följa Jesus by Ulf Ekman and information from Word of Life's official website. The aim of this study is to see how a religious leader is shaping the identity of the groups members after a certain pattern that differs from the surrounding, secular society. The research focus  of this essay includes several aspects:  how a culture is formed in a religious minority in contrast to the prevailing cultural context; how the material can be explained by Paul Pruyser?s theory on the psychological worlds; how what Ulf Ekman writes about distinguishing themselves from the environment differs from how other religious minority groups distinguish their identity;  and,  how the psychological world, expected behavior, and context of Word of Life can be structured by Valerie DeMarinis? model of assessment. I have placed Word of Life in a realistic illusionistic world developed from Paul Pruyser?s theory of psychological worlds.

Chunks and Tasks is a programming model based on the C ++ programming language. This programming model is used for electronic structure calculations, among other things.The purpose of this project is to improve the CHT-MPI software library for Chunks and tasks, so that calculations of matrix-matrix multiplications are performed more efficiently than they do with the existing software library. The software library is based on the work stealing method, which is a method the software library for Chunks and Tasks uses for the distribution of the calculation work. The considered way to improve the software library is by modifying the work stealing method in a way that makes the distribution of calculation work happen in a more efficient way , which will lead to calculations performed faster than before.Two different modifications of the work stealing method were tested and it led to two new methods, Method 1 and Method 2, which distributed the calculation work differently. Method 1 did not give results that were compatible with the theory, since the calculation time with this method was much longer than the previous method.

This master thesis is one part of a project, called ?StabSim?, with the purpose to develop a simulation model for the align and stabilisation system in main battle tank 122. The origin of this project is that it should be possible to make control analysis without risking any hardware. Besides that it will be easy to change components in order to investigate the behaviour of the system. The report includes modelling of tower and weapon mechanics and also the modelling of the synchronous motors, which control these.

In offshore oil production FMC Subsea systems use a product called cap. The cap´s mainly task is to protect hubface and seal areas on inboard hub against dirt, corrosion and mechanical damage under installation of a subsea system. A new model of a cap has been designed and analysed using finite element method. The model is called KC3-12 and has a new function, emergency release, which is a backup method for the ROV (remote operated vehicle) to release the cap from the hubface when it is placed under water. The cap KC3-12 was found to fulfil the criteria under the test load pressure, according to ASME VIII, div2.