There are several methods and models within the areas of software engineering on how to proceed during a software development process. For each of these methods and models there are benefits and drawbacks, depending on how you choose to look at them. A difference of principle between the different models is that they either advocate iterative development or not. In parts of software engineering one makes use of different methods depending on which is most fitting in a specific situation. There are several methods on how to recieve more qualitative data from the end-users during the requirement collection, but the reappearing pattern is still user centric participation, which means that the user participates more actively in part of or the entire development process.

Managementmodeller med inriktning mot processorientering blev populära i slutet av 1980-talet och början av 1990-talet och ett flertal olika modeller togs fram, marknadsfördes ivrigt av konsulter samt implementerades i många företag. Några av dessa modeller fick större genomslagskraft än andra. Många av dessa modeller blev så kallade managementtrender som fick stor uppmärksamhet under en period men sedan försvann. Litteraturstudier förde oss in på att Total Quality Management (TQM) och Business Process Reengineering (BPR) är två modeller som rönt stor uppmärksamhet. Det som intresserade oss vid litteraturstudierna var att studera hur dessa modeller upplevs i näringslivet idag, 10-15 år efter att de slagit igenom.

This report explores how organizations act when they are choosing an Outsourcing supplier. The study was conducted through multiple interviews with managers of different organizations. The data from those interviews was then analyzed through the use of two theoretical models. Our findings indicate that most organizations share the same base factors (qualifiers) when selecting an Outsourcing supplier. What therefore become crucial are the key factors that the Organizations see as Order winning factors.

The formulation of visions into practical projects is an important part of the professional expertise of landscape architects. This expertise includes the gathering, structuring, improvement and utilization of knowledge. Project models have been developed to provide tools for the implementation and governance of projects, as well as means of learning, reflection and survey of individual projects. The aim of this thesis is to describe some general project models and their theory, and to describe practical, real-life examples of project models used within landscape architecture. Questions asked are: ? How do the processes of idea to construction in landscape architectural projects lool like? Do project models have a relevance for the mission of landscape architects? ? Is a common project model used within such projects, or is the project model varying depending on e.g.

Aim: The purpose of this study is to show models from the literature which can underlie appraisal and development in the real estate business of Gavlegårdarna.1. Gavlegårdarna should be able to use the study in their work with quality assurance off their services.2. Company?s in real estate business and other students should be able to use the study for an overview of quality models.Method: To collect data I chose to use a qualitative method based on the hermeneutic research method. The collected data was a result of literature and interviews.Result & Conclusion: From the literature there are two models that are suited for analyses of quality, that is the Housing quality model and the Gap model.

This study tests two financial valuation models empirically by valuing three stocks from three industries, with the purpose of studying how well valuation models work empirically and to make a forecast. The models which will be tested are residual income valuation and discounted cash flow. Nine stocks will be picked strategically from the Swedish stock market and additional analysis will follow in the analysis chapter.Based on analysis and valuation, the commodities industry has decent valuation as the healthcare industry is undervalued thanks to the high valuation of AZN. The energy industry has low value due to the capital intensive nature of the industry. When it comes to the models and their practical implementation, DCF has been the most problematic to apply empirically whereas RIV was better but it still shows extreme values, which teaches the student the clear difference between theory and empiri..

The current paper compares the relations between different measures of activity and some common neuropsychological tests. One-hundred and fifty five healthy elderly, aged 55 - 85, living in Sweden were included. Gender-specific patterns were found for both activities and correlations between activities and cognitive measures. The main findings suggest that activities are associated with cognitive speed in men, whereas, for women, active and passive activities correlate, positively and negatively accordingly, with education. In comparison, complex models of activity outperform simpler ones and theory-driven measures just barely outperform intuitive models..

This master thesis was made to validate hydropower models of a turbine governor,Kaplan turbine and a Francis turbine in the power system simulator ARISTO atSvenska Kraftnät. The validation was made in three steps. The first step was to makesure the models was implement correctly in the simulator. The second was tocompare the simulation results from the Kaplan turbine model to data from a realhydropower plant. The comparison was made to see how the models could generatesimulation result that was similar to the reference power station.

When models are used to describe physical phenomenon during development or modification of a technical system, it is often possible to reduce both the time needed and the overall development cost. With the use of models it is also possible to investigate the potential of the selected solution, without the need for any expensive details and testrigs. In many cases it is also not possible to test all the aspects regarding the functionality that are desired from the system, without using the complete and final product.In this case a model based approach has been used to optimize the different parameters in the new snubbing mechanism for the Nose Landing Gear Retract Actuator on the JAS39 Gripen.During the simulations, upper and lower boundaries were calculated for the length of the spring and the diameter for the restrictor. The governing constraints were given by the requirements for the retraction time during cold conditions and that the amplitude of the alternating loads in the uplock mechanism were brought to an acceptable level.The most promising results from the simulations were then used in a limited number of trials in the hydraulic rig to verify that the configurations comply with the requirements.The final parameters for the snubbing mechanism were chosen to 35±1mm for the spring and 0.4-0.5 mm diameter for the restrictor..

It has been even more important in the forest sector in recent years to look at the whole chain from suppliers to end users, to improve operations and improve performance and the profits of the company. The research and development have been concentrated on the buyer?s market and product development, probably because this research has capability to give an increased cash flow. But to obtain stability and continuity in the production and selling units, the suppliers should also be investigated. The aim of this thesis is to study a one company's existing suppliers of roundwood and investigate the differences and attitudes they have about the company offerings.

The Thesis purpose is in the context of system development validate the Scrum Methodology. Projects concerning information technology are difficult to manage and tend to fail in quality, time or costs. Scrum presents a new view of the system development. Better cooperation between customers and developers, continuous follow-up on daily basis and extensive communication in the development team are all characteristics of Scrum. Scrum is described as a new paradigm by its founders but has been criticized by experts of system development too.

The objective of this diploma work is to investigate a set of Multiple Input Multiple Output (MIMO) channel models compatible with the emerging IEEE 802.11n standard. This diploma work validates also advanced, innovative tools and wireless technologies that are necessary to facilitate wireless applications while maximizing spectral efficiency and throughput. MIMO channel models can be used to evaluate new Wireless Local Area Network (WLAN) proposals based on multiple antenna technologies. The purpose of this thesis is to investigate means of channel models and their implementation in different environments such as: Matlab, C++ and Advanced Design Systems (ADS). The investigation considers also a comparison between the channel models based on theoretical data and parameter setup to the channel models based on statistical characteristics obtained from measured data.

The focus of this essay is Swedish bilateral development aid. With the help of organization theory I analyse the development aid strategies and policies of the 1990s, in order to examine how and why they were introduced. I investigate three different types of aid organization, namely structural adjustment programmes, political conditionality tied to aid co-operation, and equality policy as part of development co-operation. I analyze the introduction and subsequent use of these three co-operation forms to see whether they were applied and adopted into Swedish development aid because more efficient measures were required or because they were the most recent and modern ways of dealing with development co-operation.Organization theory presents these two ways of analyzing organization. They are occasionally competing and sometimes complementing each other in explaining organization.

In this final thesis two simulation models have been integrated. The simulation models are models of JAS 39 Gripen?s fuel system, software and hardware. The time consuming and costly work to develop software has made the department of fuel system to build two models in Xmath/Systembuild. The software model also simplifies the comprehension of how the software in the control computer of the fuel system works.

Title: Predictions and explanation models for bankruptcy in stock-companies ? A study of three failed Swedish companies Author: Tim Svanberg Supervisor: Emil Numminen Department: School of Management, Blekinge Institute of technology Course: Bachelor?s thesis in business administration, 10 credits Purpose: The purpose of the thesis is to find explanation for bankruptcy with the help of prediction models. The purpose is also to add explanation by using Behavioral analysis Method: Quantitative research of bankruptcies using financial prediction models and qualitative study of psychological pitfalls. The study is deductive. Results: I found that it is possible to explain the bankruptcies using the prediction models.