This paper describes the development of a simulation model for the ambulance flow in the Västra Götalands-region of Sweden, and an analysis tool for the output of the simulation model. The aim of the simulation model was to be able to evaluate the outcome from changes in the ambulance operations, such as a reorganization of ambulances or an increase in intensity of the ambulance calls. This evaluation is meant to serve as decision support for the strategic planning of the ambulance operations. The analysis tool was developed to visualize the abundant geographical data produced by the simulation model in a meaningful way. The simulation model was validated against historical data which showed that the dispatch time for the highest prioritized ambulance calls corresponds well with historical data.

The reindeer planning system (Renbruksplanen, RBP) is a communication and planning tool designed for Sami groups. A key purpose of this is that it will act as a tool in consultation with other market players, including forestry. Sami groups have asked for a model of how this can be used in a flexible manner. With the Swedish Forest Agency as a project manager, a communication model for how to use the RBP has been designed. It consists of a number of points divided into ?before?, ?during? and ?after? the consultation.

The aim of this thesis is to improve the control of urea injection at the combined power and heating plant Framtidens Gärstad (FTG). Tekniska Verken i Linköping AB is the owner of the plant.The FTG plant consists of a boiler where garbage combustion is done. From the combustion nitrogen oxides are emitted. These nitrogen oxides are hazardous to the environment. To reduce the nitrogen oxides, injection of urea into the boiler is used.

This paper describes the development of a simulation model for the ambulance flow in the Västra Götalands-region of Sweden, and an analysis tool for the output of the simulation model. The aim of the simulation model was to be able to evaluate the outcome from changes in the ambulance operations, such as a reorganization of ambulances or an increase in intensity of the ambulance calls. This evaluation is meant to serve as decision support for the strategic planning of the ambulance operations. The analysis tool was developed to visualize the abundant geographical data produced by the simulation model in a meaningful way. The simulation model was validated against historical data which showed that the dispatch time for the highest prioritized ambulance calls corresponds well with historical data.

The purpose of this study is to facilitate sustainable building by the use of BIM. The goal is to determine which aspects of sustainable building, which can be analyzed mainly with BIM tools, but also other aids.The study is based on literature studies and interviews. The literature review examines aspects important for sustainable building by studying environmental certification systems applicable in Sweden, as well as the BIM tools available on the market to analyze these aspects. The literature also includes the concepts of BIM and sustainability in order to provide a clearer view of its meaning. The interviews have brought the study's overall understanding of the industry and guidance on the subject.The results are presented in a table, where the aspects relevant to sustainable building are listed.

Many researchers emphasize the increasing strategic importance of supply chain management, but there is still a lack of concrete guidance for managers faced with strategic decisions in supply chain. Within decision-making theories, the rational decision-making model is the most commonly used. This because of its suitable foundation, enabling a structure to the complex decision process. The rational decision-making model is today not developed to include the aspects of strategic decision-making made in supply chain. The purpose of this research is to adjust a structured rational decision-making model, making it applicable for strategic decision-making in supply chain.

The aim of this paper is to describe which view the Chinese government in connection with the Olympics wants to display for the natural world and analyze if this view coincide with China?s foreign-policy goals. A qualitative content analysis is used. By using the theory of rational choice and a model with three different political approaches I want to examine whether or not the foreign-policy goals of the Chinese regime comport with the view that displays in two major newspapers in China. Since the runoff voting in Moscow in 2001 for the 2008 Olympics the Chinese government has been able to act rational and to compose different strategies to use the Games in Beijing for political propaganda.

Bakgrund: Tidigare forskning och litteratur som behandlar controllerns professionella yrkes-roll beskriver den tekniska rollen, där controllerns administrativa och funktionalistiska roll i organisationen står i fokus. Rollen kan beskrivas vidare med hjälp av sociologisk rollteori där rollskapande och rollåterskapande är två centrala begrepp.Problem: Utifrån tidigare forskning har vi formulerat tre frågor i syfte att förstå controllerns yrkesroll utifrån ett socialt rollperspektiv: Vad betyder begreppet controller och vad säger teori och tidigare forskning att en controller bör göra? Vad är controllerns roll i praktiken och hur skapas yrkesrollen? På vilket sätt går controllerns rollskapande att förklara med hjälp av rollteori?Metod och teori: Vi tillämpade en fenomenologisk tolkande metod i denna studie, då vi valde att fokusera på controllern som individ. Utifrån sociologisk rollteori ur ett multipelt perspektiv analyserar vi rollbegreppet, i syfte att få kunskap om hur individer skapar mening i den värld de lever i. Vi använder oss av tre rollteorier av tre välkända författare inom sociologisk roll-teori för att vidare tolka controllerns roll bortom den tekniska beskrivningen.

We have been looking at three different types of agriculture in Södermanland, in the middle east of Sweden. We call the different types for Intensive, Extensive and Mix. The purpose is to get an economic defensible plan for how to run different farm sizes. We also have been looking at the working hours and how many hours the different types will give. We have a farm called Taxinge Gods as our pilot farm. Taxinge Gods grow 407 ha land and is located 60 km southwest from Stockholm.

Accounting for financial instruments can either be based on a transactions approach or an eco-nomic approach. Under a transactions approach instruments are reported at cost whereas under an economic approach instruments are reported at fair value. Hence, under a transactions approach realization becomes a criterion for recognizing fair value fluctuations as revenue whereas under an economic approach it does not. A mixed model is defined as a combination of the transactions approach and the economic approach insofar it records some accounting items at cost and other items at fair value. The mixed model gives rise to an issue commonly referred to as an accounting mismatch.

Control of a diesel engine equipped with Variable Geometry Turbine (VGT) and Exhaust Gas Recirculation (EGR) requires a multivariable control method. One problem is that the engine system is non-linear. Furthermore there are strong cross-connections between inputs and outputs and the inputs have alsoboundaries. To be able to manage these control problems, MPC has been used that is a multivariable method. The MPC-controller consists of an optimization problem and therefore MPC can find the optimum control signals in an easy way.

This thesis treats the subject of a complete steady state and dynamic model of the VSC-HVDC covering both the AC and DC system-side of the converter. The topology of the model is recreated after the scheduled transmission line in the south of Sweden, called SydVa?stla?nken. The topology covers both a simple two terminal connection as well as a multi-terminal one. This model is to be implemented in the power system simulation program ARISTO.

The purpose of this development project is to create a model for working with a high school project in Electrical and Energy Program. It should be conducted in a form like companies do according to the goals from The Swedish National Agency for Education. In order to fully perform this we use the concept of Young Entrepreneurship. The model is created according to the new conditions from The National Electrical Safety Board. There is now an exception saying that a student during education is released from the demand of employment that is the normal procedure where you are under supervision from a certified electrician. During the project there has been theoretical and practical examinations in order to clear out the advantages and disadvantages using this model, but also to examine whether it is useful in the future and to what extent it can be used. The result indicates that the model is useful and fulfills the goals from The Swedish National Agency for Education but that the model has its limitations and difficulties.

This thesis studies the negative impact that control signal saturation may have on a controlled system. Different methods that are used to compensate for this problem are also studied and evaluated. Both sensitivity to disturbances and the effect the method has on the systems'ability to follow a reference signal will be examined. Stability will be discussed, but no conclusions whether the systems are stabilized or not can be drawn. Control signal saturation will lead to a slower behavior in general.

An energy calculation model for Swedish houses   that is fast, flexible and user-friendly has been developed within the   framework of this thesis.  The model   also provides a set of actions which may be investigated in the model based   on savings and payback period. Energy use in a house depends on the technical   conditions, such as building envelope and heating systems, which outdoor   climate the house is exposed to and who lives in the house. Energy use for a   house can be divided into heating, hot water and household electricity. There   are several methods to calculate the energy use of a house. This report   summarizes the methods that may be suitable for a fast and user-friendly   calculation model.