Sökresultat:
4147 Uppsatser om Model Confidence Set - Sida 50 av 277
Pilotstudie för utformning av modell att uvärdera utrustning
Swedish Trotting association was formed in 1925. They are the ones who design the regulations concerning what is permissible and not permissible for the horse, driver and trainer, when they have a license at a Swedish racing track. The Veterinary department of Swedish Trotting association decides in consultation with representatives from veterinaries around the country what is allowed and not allowed, based proven experience, combined with the availability of scientific data and Veterinary Department's own assessment.
After stricter regulations for good animal welfare from the Swedish government, Swedish Trotting association is going to work out a workable model for how new equipment can be tested in the future to see how the equipment affects the horse. In the future, all equipment will be objectively tested before approved. The purpose of this work was to develop a well-functioning model for this.
The research-question for this work is:
Is this study design a well-functioning model of how the equipment should be tested in the future?
The equipment used for designing this model was bitless bridle with a bit.
Om du säger det så
This study explores the different effects on attitude and behaviour three frequently used advertising techniques have. The techniques compared are social influence and egoistic and altruistic benefit-appeals. The results showed that ads featuring social influence had statistically significant higher mean values regarding attitude towards the ad compared to both the other ads, and significantly higher mean values regarding brand attitude compared to the ad appealing to egoistic motivations. Though, all advertising effectiveness measures used in this study - that is, attitude and intention variables - indicated that social influence was more effective than the other advertising messages. Thus, in accord with earlier studies, it can be stated with confidence that social influence is an effective tool to use in marketing communications..
"Challenges when implementing standardized and processes within a customer service unit"
Abstract Interest in Lean grows and spreads to the public from industrial and service sectors. Lean is currently used in administrative processes and it is called Administration but can administration be Lean? The aim of our study is to develop a useful model for a successful implementation of Lean Administration by using various scientific articles, books and information from the case study.The part of the purpose is to: ? Identify critical success factors that arise? Identify the challenges arising from the implementation of Lean Administration.We have studied a Division within Distribution at GE Healthcare in Uppsala. The model that we have developed provides challenges and success factors for a successful implementation.In order to succeed in implementation, a culture that promotes continuous improvement must exist in the organization. A key success factor is to understand Lean Administrations structure and principles.
Bokbussens värde och funktion. En kvalitativ intervjuundersökning med bokbussanvändare och bibliotekspersonal
The purpose of this master thesis is to investigate if the mobile library has a similar role as the public library. To study this further we intend to examine the value and function of the mobile library. Answers are sought to the following questions: Can the mobile library be seen as a public library in a smaller scale? How do the users experience the value and function of the mobile library? What does the library staff think of the value and function of the mobile library for the users? What would the consequences be if the service of the mobile libraries would not exist? The method used was qualitative interviews. The groups of respondents are mobile library users and library staff.
Frekvensreglering i det nordiska kraftsystemet
Svenska Kraftnät is (together with the other transmission system operators of the Nordic power system) responsible for keeping balance between the generated and demanded power in the Nordic power system. Spontaneous load variations and system disturbances, however, lead to power imbalance followed by frequency variations. The frequency deviations can be limited to an acceptable level by the spinning reserve, mainly by hydro power control. But there are also other system properties which have a great influence on the frequency and system stability. The frequency and voltage dependence of the loads have a direct influence on the power balance.
Den kritiska Messengergenerationen : En studie om politiska diskussioner i sociala medier samt skolans roll i att forma kritiskt ta?nkande individer
The purpose of the study is to explore how social media can be used as a forum to discuss politics and also how young people use critical reflection to evaluate the information available on social media. To achieve the purpose, a qualitative research is used. The empirical data is collected through semi-structured interviews with six high school students who voted in the Swedish parliamentary elections in/of 2014. The empirical data were then analyzed based on previous research on social media, and the school's mission to foster individuals who think critically. The analysis is also based on the theory of deliberative democracy model.
Barns upplevelse av astma : en litteraturstudie
Asthma is one of the most common diseases among children. The aim of this study was, through a literature review, describing children's experience of living with asthma and show how negative experiences can be turned into positive ones, by the nurse's work. Results showed that many of the children with asthma experienced respiratory- and chestproblems, tiredness, panic, fear, anger, frustration, discomfort, irritation and anxiety. Children felt most restricted in physical activity's. Education used to enhance children's experiences included relaxation, imaginary exercises and confidence training.
Modellbaserad drivlinereglering
A cars powertrain consists of everything that is needed for its propulsion. The components in the driveline that transfer the power from the engine to the driven wheels are not absolutely stiff, hence they will wind up due to the torque and act as torsion springs. If you suddenly demand a bigger torque by stepping on the accelerator pedal, a so called tip in manoeuvre, and that torque is acquired from the engine as quickly as possible, the driveline will not be able to transfer that fast torque change due to its weakness and as a result it will start to oscillate. These oscillations will be transferred to the driven wheels and make the car to accelerate jerkily which will be experienced as uncomfortable by the passengers. Furthermore, there is a backlash in the driveline that will make the weakness in the driveline even more excited than it should have been if the backlash did not existed.To avoid too big problems with these oscillations there is a control system that controls the demanded torque.
Dramapedagogikens inverkan på elevers självförtroende / Drama Pedagogy and its Influence on Students? Self-confidence
Utvecklingen av självförtroendet är en pågående process. Ett dåligt självförtroende hos skolelever återspeglas på deras arbetslust och resultat i skolan. Hur yttras det och hur kan man avstyra det? Kan dramapedagogiken hjälpa och hur i så fall? Vad är dramapedagogik?
I detta arbete beskrivs dramapedagogikens metod och inverkan på att motverka dåligt självförtroende hos elever. Underökningen baseras på litteratur samt empirisk undersökning i form av intervju med tre elever och en dramapedagog.
Interna processer : Modell för ett effektivt returstålsflöde
The last decade has created an increasing pressure on companies to decrease their impact on the environment and to increase their effectiveness of recycling the company?s resources, especially for the steel industry. Companies have also started to realize the economic aspects of an effective internal reverse logistics. In the past the value of an effective internal reverse logistic was something that companies tend to underestimate and there are few academic studies done in this area. The purpose of this essay has been to identify key factors to create an effective in plant storage, transport, sorting and handling of returned steel. From these factors a generalized model for creating an effective return steel flow will be developed.
Från 2D till BIM i ett trähusföretag : Transition from 2D-CAD to BIM in a timber frame home company
A prefabricated timber frame house previously built by Villafabriken AB has been modeled in Autodesk Revit Architectural, a 3D-program based on BIM-technology. This has been done tosee if it?s possible to produce the publications that Villafabriken demands from the designengineer?s work, and examine which possible extra values that may arise compared to traditional 2D-CAD drawing.BIM is short for Building Information Modeling. Everything is stored in a single database and a change in the project file is automatically updated across the project. BIM provides more than just drawings since information from the model can be retrieved in various ways such as lists and quantity schedules.It was possible to produce the publications that Villafabriken demanded using Revit, but BIM doesn?t only mean a new way of drawing, it also require a change in the company?s process were the information from the model is being used..
Kapacitetsberäkningsmodell för materialhanteringsflödet på Ericsson i Kumla
Ericsson?s factory in Kumla, Modules Kumla, became a hub for radio modules and micro base stations, which enables mobile communication through radio base stations, in 2004. Because of this the factory focuses more on the logistics operations. This has led to a need to be able to plan the capacity for the materials handling system. This master thesis has therefore been performed at Modules Kumla to develop a capacity calculation model for the material handling flow during the autumn of 2005.The work has contained a mapping of the material handling flow regarding to which activities was performed and how much time they consumed.
Välfärd, jämställdhet och demokrati
The purpose of the essay is to analyze the welfare state from a gender perspective. Further, the paper analyzes and critically examines three different normative solutions provided by Irish Marion Young, Nancy Fraser and Jürgen Habermas for the realization of a welfare state that includes women.Habermas argues that the welfare state has created a situation of dependency and state paternalism which reduces both individual and collective self-determination. Young follows Habermas? argument. She argues for a political climate where justice is reduced to the distribution of material goods rather than the elimination of underlying relations of domination and gender specific patterns.
Realisering av en modulär skogsmaskin - En skalmodell
Wood for commercial use is harvested from forests using forest machines like harvesters which folds, branches and cuts trees and forwarders which transports logs to a landing area for further transport to a processing facility. Future forest machines have to be much gentler to the machine operators and forest soil than today's machines. Hence new machine solutions must be developed and tested. A practical way is to develop a physical scale model which can be used as a test-bed to incorporate different types of solutions for suspensions, cabin damping, tires and tracks, crane and overall architecture. The aim of this project was to develop such a 1:5 scale model of a forest machine, named as ?Skogbil.A scaling strategy was employed to arrive at important scale dimensions and specifications ofSkogbil which would be comparable to the full scale model.
Pressmeddelandet - betydelsefullt eller föråldrat verktyg? : En fallstudie av journalisters och kommunikatörers resonemang kring pressmeddelandens funktion
Journalists and communication managers are becoming more professional and to reach out to its stakeholders in society today, organizations must work strategically with communication, to enter the news. Many make use of press releases to provide journalists with information, hoping to influence what is published on the news. With a background in the medial change that occurs is the purpose of this study to elucidate and problematize which role press releases has for newsrooms and for organizations today and in the future. A qualitative interview study has been used, and communication managers from three organizations and journalists from three newsrooms has been interviewed. The study has been combined with a quantitative pilot study of selected press releases and articles from the selected organizations.