Producing a building is a long and complex process. It consists of several parts, from the feasibility study and design stage onto the construction and finally the management of the building. The design process is a critical part of the process where construction plans are made. The quality of the plans affect the production phase in great extent and faulty plans can pose a risk for extra costs for all parts in the process. The cost of producing dwellings has increased the last years and the detail design process is one of many phases where improvements can mean cost savings within the whole building process.This report aims to point at parts within the detail design process which could be more efficient, regarding communication, follow-up and time planning, and to give suggestions for improvements.

The aim of this thesis was to answer a number of questions about the environmental consequences of aircraft de-icing. A further aim was to suggest how the environmental consequences due to the release of de-icing fluids can be measured and reduced.The main impact of the aircraft de-icing on the environment is due to the large oxygen demand for the degradation of glycol based de-icing fluids which are released in the environment. The effect of the increase in oxygen demand depends on where the degradation occurs in the ecosystem. In a sensitive ecosystem, the large demand of oxygen could provide an anaerobic environment which would be harmful for many types of organisms.In order to reduce the negative effects of the applied de-icing fluid, there is some type of collection system at every regular airport in Sweden. The methods of collection can be divided into two general groups, hydrological isolation or vacuum sweeper trucks.

The purpose of this study is to incrementally, through a combination of various methods, examine the assumptions about the working economic outcomes that can be made based on planned ergonomic intervention in a department at Pfizer Health AB in Strängnäs. The study contributes to knowledge about how assumptions on OSH financial results can be made, based on planned ergonomic interventions. These assumptions were based on biomechanical calculations made on the basis of ergonomics measurements with inclinometer. The study is important because previous research has shown that poor work environment have a bad impact on the economy of a company in different ways. It can for example be negative impact on the company's productivity and quality of the units produced or the services provided.

This project is implemented as a thesis at the Royal Institute of Technology in the master?s degree program Integrated Product Design and Industrial Design Engineering. The project has involved development and efficiency of a free starter package for expectant parents with useful content consisting of useful products for both before and after childbirth. Areas that have been investigated include packaging development, service design and appropriate content for the package.During the work, theory about packaging design, materials, manufacturing techniques and logistics have been processed to base the further work on. The project process has involved competitor analysis and interviews with store owners and customer surveys, that have been conducted to identify areas for improvement of the current solution.

The Swedish beef cattle population is growing when the dairy cattle become fewer. The fertility of the beef cows is important for the profitability in beef cattle production. Today there is no genetic evaluation for female fertility in Swedish beef cows. The purpose of this study was to see if calving interval can be used in the genetic evaluation as a measure of female fertility in beef cows. For this purpose the variation in calving interval for beef cows of different breeds and ages registred in KAP was studied.

AbstractThe project "Sound and Play" have been implemented in collaboration with the toy company BRIO in Malmo. The purpose of the project was to examine whether and how BRIO in the future could develop toys around sound for Toddlers.The problem formulations that would be answered after completion of the project was "How could BRIO broaden its product range with the help of audio toys?", "How can you combine toys and sounds in an interesting way for children?", "How do you create a toy with sound that is fun for the child, but not annoying for parents?". Currently BRIO only has two toys with sound in this age group.The expression of the toy was going to be a mix of classic and cool and the overall feeling of the toy was going to be explorative and arouse curiosity in the child. This feeling would be communicated through simplicity and joy.

Vaccination of fish can be assumed to cause pain. This study was designed to see if we can minimize the suffering of fish following vaccination. Fishes are cold-blooded animals and thus more primitive than warm-blooded animals. Despite this, many organs, e.g. the nervous system, have the same basic structure as that of other vertebrates. The fibre system for conducting pain is more diffuse than in humans.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

Examensarbete utfört på uppdrag av Boliden Mineral AB i Aitikgruvan. Det har sin bakgrund i att malbarheten hos Aitikmalmen varierar kraftigt, upp till 40 %. Detta försvårar planeringsarbetet och således mycket intressant och lönsamt att söka orsakerna till variationen. Examensarbetet syftar således att utgöra en förbättring i verksamheten helt i linje med styrdokumentet, the new Boliden way. Emellertid föreligger stora svårigheter med att spåra malmen genom hela processen varför man i detta arbete har valt att studera sambandet mellan krossbarheten och bergmassans respons på den tillförda specifika energin från borriggen.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

För att få en rättvis betalning av timmer för både säljare och köpare gäller det att det sågtimmer som kommer till sågverken mäts in på rätt sätt. För att sågverken ska kunna hålla nere råvarukostnaden gäller det att minska råvaruspillet och öka optimeringen av stocken. Ett led i att hålla nere kostnaden är att få en snabb och effektiv mätning vilket har lett till en ökad automatiseringsgrad på sågverken. Setra Kastets sågverk byggde 2010 en ny timmersortering. Under sommaren 2011 började Kastet uppleva problem med den automatiska underbarksmätningen som sker med hjälp av trakeidmetoden.

Bakgrund: Globalisering har skapat ett ökat behov för företag att förbli konkurrenskraftiga. Att hantera kostnader effektivt blir allt viktigare i organisationer. Medutgångspunkt i ett fallföretag så har problem kring mätning och jämförbarhetmellan hanteringen av lagerkostnader i geografiskt spridda lager identifierats. I nuläget finns det ingen metod som jämför hur väl hanteringen av lagerkostnader görs i olika länder. De landspecifika egenskaperna skapar olikheter och för att åstadkomma en jämförbarhet så krävs anpassad ekonomistyrning.Syfte: Syftet är att utveckla en kalkylmodell som möjliggör en homogen mätning för olika länders hantering av lagerkostnader.

This report is a result of a project that been conducted on System Andersson. System Andersson sells and develops MPS-systems for small and medium sized manufacturing companies. System Andersson are today located in the central parts of Jönköping and has about 20 employees. The goal for the project is to develop a new version of Andersson Qwick mps. The project has been divided into a number of smaller projects were the authors been part of the planning module project.

This paper aims to study the Armenakis´ theory of readiness, "are they ready?", which consists of five key components affecting the outcome of an organizational change. In this case study, the intention is to investigate if any component is important; alternatively if it is possible to discern a pattern between components, i.e. how they correspond to each other. During the past 30 years have a research group lead by Armenakis has studied organizational change and how resistance to change can be avoided by preparing employees in the introductory phase of change. The main object for Armenakis is the question "what determines whether the employees (change recipients) adopt and support, or reject and resist a change".

Forestry and forest products are vital components of the Swedish economy but the forest is also important for recreation, hunting, out-door life and conserving biodiversity. The Swedish Forest Act has two equally important objectives, production and environmental protection. Polytax is the Swedish Forest Agency´s inventory programme which monitors progress toward the two objectives in connection with regeneration fellings. It includes data on environmental protection measures taken in connection with regeneration fellings. 30 § of the Swedish Forestry Act and related regulations specify the demands for conserva-tion of nature.