Syftet med uppsatsen är att ta reda på hur en organisationsförändring kan mätas med avseende på formella och informella element samt att presentera hur mätprocessen kan genomföras. Studien bygger på intervjuer och dokumenterade utvärderingar. Studien visar att de formella elementen mäts genom att kontrollera att målen som satts upp inför förändringen är uppfyllda. De informella elementen mäts genom medarbetarundersökningar dock utan någon koppling till förändringen som har genomförts. När de informella elementen mäts i en förändringsprocess görs detta genom så kallade attitydmätningar.

Syftet var att undersöka vilka psykologiska och emotionella reaktioner som förekom i samband med idrottsskada. Vad som gjorde att en ung idrottsflicka kommer tillbaka till idrotten och vad som får henne att följa rehabiliteringsplanen efter en allvarligt idrottsskada.?Cognitive appraisal model? (Wiese-Bjornstal et al. 1998) har använts som teoretisk model för en djupintervjustudie med fyra 17-18 års elitidrottsflickor i lagbollspelen fotboll och handboll. Deltagarna intervjuades 3 gånger.

Örebro svets & hydraulik AB tillverkar lastknektar till Suzuki Garphyttan. På lastknektarna transporteras sedan stora rullar av tråd i stål. Knektarna har visat sig kollapsa efter viss tids användning och behöver därför en förbättrad konstruktion. Höga laster, tuff hantering samt ovarsamma lyft kan vara orsaker till att knektarna kollapsar. Örebro svets är väl införstådda var skadorna uppstår i nuvarande konstruktion och vill därför förstärka denna del och konstruktionen i sin helhet.Kraven på den nya konstruktionen, förutom att vara mer hållbar, är att befintligt mått mellan benen ska följas och att knekten ska vara staplingsbar vid transport till galvanisering.Nuvarande knektar har modellerats i CAD-programmet Pro/ENGINEER för att sedan analyseras med Finita Elementmetoden i beräkningsprogrammet ANSYS för att visa var deformation och spänningar uppstår.

This master thesis holds a modelling in Simulink for a physical model of a main battletank tower, a three-phase induction motor and some mechanics. The aim of this work is to connect an earlier project at AerotechTelub, named StabSim to another called Eldris. In StabSim it has been made a Simulink model of the align and stabilisation system in a main battle tank 122 and in Eldris it has been build a physical model of a main battle tank tower. In this thesis the models that differs between Eldris and a real tower is changed in StabSim, and the parts that only exist in Eldris is added, for example a torque generating system which purpose is to make the model to behave like a real tower in control application, although it only has half the inertia as a real tower. The thesis even includes proposing a calculation of the torque that the torque generating system will actuate at the model..

Transformation of inorganic mercury (Hg) to methyl mercury (MeHg) is a biotic process that is proposed to be conducted primarily by sulphate reducing bacteria (SRB). The formation of MeHg is of great interest because it is the mercury species that biomagnifies to the greatest extent in the aquatic food webs; about 90 % of all Hg in fish is MeHg. Our understanding of factors involved in the production of MeHg is very important for making a reliable risk assessment. The purposes of this study were to investigate the different factors that control the solubility of Hg and the production of MeHg in a contaminated lake sediment. The lake Ala-Lombolo, Kiruna municipality, is well-known to be contaminated by mercury from different sources. Sediment cores were sampled at three different locations (N, SW and SE) in the lake and divided in three different layers; 0-5, 5-10 and 10-15 cm.

Birch is the dominant deciduous tree species in Sweden but only 16 % is found in pure birch stands. The majority of the birch (51 %) is to be found in conifer dominated stands. Swedish forest land comprises approximately of 23 % mixed stands and one problem is that for mixed stands there are few management recommendations. The underlying aim of this thesis was to study the management of mixed forest stands of spruce and birch to achieve good timber quality of birch. The study was based on a literature study and measurement in a field experiment launched in 1998 by the Swedish University of Agricultural Sciences (SLU).

The determination of the optical properties of biological tissue is an important issue in laser medicine. The optical properties define the tissue´s absorption and scattering behaviour, and can be expressed by quantities such as the albedo, the optical thickness and the anisotropy coefficient. During this project, a measurement system for the determination of the optical properties was built up. The system consists of a double integrating sphere set-up to perform the necessary reflection and transmission measurements, and a computer algorithm to calculate the optical properties from the measured data. This algorithm is called Inverse Adding Doubling method, and is based on a one-dimensional transport model.

The work was carried out on Termisk Systemteknisk?s office in Linköping. The aim was to create a computer system with infrared camera technology for quality control and temperature monitoring of manufacturing processes in industry. The system should be configurable such that it can be used on several different issues, including those where the real-time analysis of camera images is required.The developed system is based on an existing framework, Panola, to deal with measurement results and images in a database. The framework is built for the system continually check for new data , and the task was to create a foundation upon which to build systems that use the framework, but fully or partially utilize direct calls .

This report describes the development of a sample loader for my diploma work at Q-linea AB in Uppsala. The sample loader will replace the process of loading fluid samples into Q-linea?s instrument for biomolecule analysis. The earlier process was done by hand and was a time consuming and inefficient task.The work was initiated with a design phase where an overview of the system was created. The sample loader will be receiving text commands from a PC that coordinates all the subsystems like pumps and lasers on the analysis instrument.

Background: Anxiety with children before surgery is well known. From the 1950s there are various assessment instruments. Despite that most day surgery units offer preparation for children and parents, there are many children who exhibit a strong anxiety the day of surgery, which can lead to postoperative behavioral changes. Today the nurse estimates the anxiety of a child on personal experience and knowledge, forming the basis for estimation whether the child is in need of sedation or not. The purpose: of this study was to evaluate instruments that the nurse can use in measuring the degree of anxiety of children before fast clinical settings, such as day surgery.

Hanterbara båtar is a new company who builds alumina boats customized for people in wheelchairs. Due to the fact that the company only built two boats yet, the production documentation is not complete. The drawing that does exist is not in an exact standard which makes production planning harder.The purpose of this work has been to make the production of the boat easier and simplify further development and modification. Product development in the form of optimizing details is also one of the main purpose of this work.This is all done by making a 3D-assembly of all the existing drawings. After this is done new drawings will be made and added to the main assembly.

The connection between fluorescence and color management still is a relatively unexplored area. Thefollowing composition analyses the theory that when printing on fluorescent ink jet paper using ICCprofilesa more yellow print will appear. In theory the ICC-profile compensate for blue light that fluorescefrom the paper with the complementary color, yellow. The human eye apprehands this fluorescentlight as white.When categorizing a number of ink jet qualities some tests to indicate change of color in the final printwere made. Five qualities were chosen for further analyses, each with different white point.

This report's aim is that by field measurements determine the function of Aprobo soundproofing material dB2 for reducing impact sounds, the measurements is done in ?the school for fine art? in Umeå also known as ?konstnärligt campus building nine?. The construction technique is used in areas sensitive to impact sound between different floors in the building. The measurement?s is also to do a function control of the buildings sound quality compared to Swedish and European standard when it comes to air sound, impact sound and reverberation time .

Ericsson develops a new stripline directional coupler. Its design is described in appendix B and differs from the directional couplers Ericsson uses in current products. The new directional coupler will be used for transmission power measurement in future UMTS 3G base stations.The most important parts of directional coupler theory are presented. It is necessary to study this theory to understand how the coupler works and how it should be designed to get good performance.Optimal directional coupler termination component values to get high directivity and broad directivity bandwidth have been investigated.The trim screws trim ranges have been studied.A simple analysis of serial production performance when termination component tolerances are taken into consideration has been done.The resistance components reactive (inductive/capacitive) characteristics at 2.14 GHz have been analyzed.The directivity performance limitations of the directional coupler, when Ericsson?s band pass filter is connected, are investigated.Design changes leading to better performance are proposed.

ProblemformuleringDet vi med denna uppsats vill undersöka är hur en tjänsteorganisations produktivitet kan mätas. Därför lyder vår problemformulering enligt följande: Hur kan produktivitet mätas i en tjänsteorganisation? Produktiviteten i en tjänsteorganisation påverkas av ett antal faktorer, till exempel personalen, kommunikation, ledarskap och de IT-system personalen arbetar i. Med ?mäta? syftar vi till att kvantifiera de kvalitativa faktorer som påverkar produktiviteten. SyfteUtöver att se hur produktiviteten kan mätas i en tjänsteorganisation ska vi utveckla en modell som visar hur tjänsteproduktiviteten kan mätas samt identifiera vilka faktorer som påverkar och hur de påverkar produktiviteten.