ABSTRACTMany wind turbines have problems with icing and there is still no effective method to de-ice without stoppage of production and power loss. Here I therefore consider other methods than those available today, and particularly, I consider how these methods could be applied to wind turbines of the company Oxel. A surface where the water droplets do not attach might be the basis for a useful method. If no water attaches, no ice could form. To accomplish this a hydrophobic surface is nessesary, for example wax.

This paper briefly summarizes Bergslagen as a bedrock province in order to give background to the genesis and presence of REE-bearing minerals (short for Rare Earth Elements) in the region. These mineralizations mainly occur along the REE-line, a line aproximately a hundred kilometers in length between Norberg in the north and Nora in the south with a width of a few kilometers. Situated in the southwest of Bergslagen it is currently one of only a few places in Sweden where REE-bearing iron oxide mineralizations are potentially economically viable for mining. Ore Microscopy has been conducted in order to characterize an ore sample from Myrbacksfältet, one of few sulphide rich iron oxide mineralizations within the REE-line. Additionally, an electron microscope analysis of a sample from Stålklockan, a suspected REE-bearing mineralization also within the REE-line was confirmed by EDS (short for Energy Dispersive Spectrum) analysis.

An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by Microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

The tribo system ice-curling stone was investigated in order to understand the mechanisms behind the stones' behavior on the ice sheet. The problem with non-identical stones should also be addressed.The stone curls, that is, its sliding path deviates from a straight line to the right for a clock-wise rotation and to the left for a anti-clock-wise rotation. Several mechanisms to explain this behavior have been proposed over the years but none has been successful.By carrying out experiments at the local curling rink and studying silicon castings of ice- and stone-surfaces with scanning electron Microscopy and vertical scanning interferometry, it has been decided that the curl is not due to dry friction, ice-debris or the difference in friction on the left and right side of the stone. The side force comes from the fact that the friction is higher at the back of the stone than at the front.The contact between stone and ice is never completely dry, nor in the hydrodynamic lubrication regime. It is probably a combination of hydrodynamic lubrication and a contribution from mechanical scratching of the ice.

There are several objects of age whose provenance and history has disappeared with time. The purpose of this thesis is to find out which analyzing methods that gives results and how the different methods can be combined and /or established in each other. The investigations centers around an embroidery, belonging to Tämta church, with unknown origin, use and age. The embroidery is long and narrow with applications in the form of dragons and eagles on a ground of velvet cloth. The dragons and eagles are covered with metal threads.

An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by Microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

De sulfidgruvor belägna i Långbantrakten som studien behandlar ligger i den västra delen av Bergslagen utanför Filipstad i Värmlands län. Opaka mineral (malm) från två mindre mineraliseringar, Näset och Getberget, har studerats med malmmikroskop och mikrosond för att beskriva mineralogin i området. Båda områdena domineras av olika (Cu-Fe-Pb-Zn)-sulfider, i Näset av kopparkis (CuFeS2), blyglans (PbS) och zinkblände ((Zn,Fe)S) och i Getberget av blyglans, zinkblände, kubanit (CuFe2S3) och magnetkis (Fe1-xS). I Näset finns en del mindre frekventa mineral, två olika faser av Co-pentlandit (en nickelrik och en utan nickel), gedigen Sb och Bi, (Ni-Co)-sulfid, breithauptit (NiSb) och magnetkis. Kubanit är även ett viktigt mineral som speglar mineraliseringens bildning.

The aim of this study is to provide a comprehensive overview of C?ronis beeswax varnish by Lefranc & Bourgeois; its contents, aging properties, solubility, and possible removal methods, with G?teborgs Konstmuseum?s ?Gothenburg Museum of Art? collection as the stud??s material? The purpose of the study is to provide a basis for decision-making regarding the treatment of works treated with C?ronis wax varnish. The study is based on contemporary conservation theory and interpretation-based decision-making and utilizes FTIR, Microscopy, and solubility tests to examine the properties of the varnish. The study shows that C?ronis does not appear to be harmful to the treated works and has retained its solubility properties and transparency over time.

ABSTRACT Tobacco Rattle Virus (TRV) is a soilborne plant virus. It is an important pathogen in potatoes where it causes spraing disease. This disease can lead to significant economical loss for the farmer, so it is imperative to get the proper diagnose before planting. TRV is spread naturally by free-living nematodes (Trichodorus and Paratrichodorus). Transference of TRV to a plant occurs when the virus-carrying nematodes feed on plant roots. The relationship between virus, nematodes and plants is complicated, and has to these days not been fully characterized. The diagnostic methods available today do not work sufficiently.

Allanblackia is a tree genus native to humid forests in West, Central and East Africa. Its fruits contain large seeds from which edible high-quality fat can be extracted. In order to create a sustainable supply chain of Allanblackia seeds, a domestication program has been initiated with the purpose to enable smallholder farmers to grow the tree as an agroforestry component and cash crop. More knowledge is required to understand the tree?s biology and possible symbioses involving soil microorganisms with plant growth enhancing poten-tial.

Introduction The genetic skin disease epidermolytic ichtyosis is caused by mutations in either keratin gene 1 or 10 and leads to blisters and hyperkeratosis of the epidermis. At cellular level the disease is seen as aggregates in the keratin filaments. Since medicines are hard to investigate and produce mainly due to lack of reproducible model systems, there is no good treatment available for this disease today. In this article we describe how an in vitro model consisting of cells from a stable cell line transfected with expression plasmids to mimic patient cells, may be a possible alternative for screening compounds for therapies. The first step was to generate an expression plasmid required to complete the in vitro model.

The main aim of this research is to survey the general colour scheme for private dwellings inVisby, built 1860?1930. During this period the visual appearance of the town of Visby changedsubstantially, since the increased local production of lime led to the plastering of many woodenbuildings. Which colour schemes were chosen for the different building types of the historic centreof Visby, and which colours came to dominate the time period? The methods used for answeringthese questions have partly been field studies on site and sampling of selected buildings, andpartly critical reading and observation of iconographic material (paintings, drawings, aquarelles,postcards and photographs).

Inclusion body disease (IBD) affecting boas and pythons is a serious and common disease. Boas can be clinically healthy carriers, which makes control of the disease difficult. The causative agent has not yet been confidently identified, and therefore there are no serodiagnostic tests available. Today, histopathologic examination of tissue biopsies is the recommended antemortem diagnostic method, but there are several disadvantages. The objective of this study was to compare the sensitivity of two diagnostic methods ? liver biopsies and blood smears, and to evaluate ultrasoundguided needle biopsy of the liver.

It is well known that dogs often have Helicobacter spp in their stomach. The importance of these bacteria in the development of gastrointestinal disease in dogs is still unknown. In humans, Helicobacter pylori is a causative agent of chronic gastritis and gastric ulcers. In contrast to humans, dogs seldom harbour naturally acquired H. pylori.

Cryptosporidium parvum is a protozoan parasite causing diarrhoea in many different animal species including cattle and man. It is an important enteric pathogen in neonatal calves and it is the second most common pathogen found in diarrhoeic calves in Sweden. Subclinically infected adult cattle have, in international studies, been shown to shed a low number of oocysts in faeces and this has been recognised as a potential source of infection for new-born calves. The detection methods used for diagnostic purposes are based on microscopic investigation of faecal smears. These methods have a fairly low sensitivity and samples from subclinically infected cattle have to be concentrated before analysis.