In the middle of Australia there is a city called Alice Springs. The city has one of the highest amounts of daily sunshine hours and sun irradiation in the world. The Australian Government runs a project called Solar Cities, and Alice Springs is one of the participators. The main part of the goal with the Solar Cities project is to increase the amount of electricity generated by solar power and by doing that lower the impact on the environment. This thesis examines the possibilities for construction of a large scale solar power plant in Alice Springs. This is done to determine the potential of creating a more sustainable energy system in the city.

The purpose of this thesis is to deepen the understanding of our contemporary description of digital literacy using the perspective on knowledge from the Nicomachean Ethics by Aristotle. I have chosen to deal with the problem using a hermeneutic approach. The method of inquiry is based on close reading of the selected literature. The selection itself has been made after a strategic selection regarding perspective on knowledge and digital literacy. It appears in the thesis that there are substantial differences but also similarities between our contemporary description of digital literacy from Recommendation of the European Parliament and of the Council of 18 December 2006 on key competences for lifelong learning and the perspective on knowledge from the Nicomachean Ethics by Aristotle.Still, the result has been possible to use for the purpose of the thesis since the problem has an answer and a deepened impression of the understandings of digital literacy..

This thesis, drawing from several empirical investigations, reaches the conclusion that there seems to be a positive correlation between the level of democracy and the level of state capacity in Latin American countries. This correlation is explained by a hypothesis derived from Rational Choice theory. With some important caveats, this conclusion is then applied to the discussion about democracy as a form of government. Within democracy, the thesis also offers an insight into different electoral systems and its possible implications, mostly on a theoretical level. The thesis only exists in swedish as of yet..

Idag arbetar avdelningen för extern produktion vid BAE Systems Hägglunds med produktions stödjande uppgifter för leverantörer av Build-to-Print komponenter. En allt större del av BAE Systems produkter konstrueras av BAE Systems konstruktörer medan tillverkning genomförs av leverantörer. Denna förändring har skapat ett behov för BAE Systems att kunna stödja leverantörer i produktionsprocessen för att förhindra att kvalitetproblem uppstår. Den produktionsstödjande uppgiften blir också viktig då det finns en vilja på BAE Systems att kunna genomföra kvalitetssäkring hos leverantörer innan ankomst. Dagens arbetsprocess för produktionsstöd har vuxit efter olika leverantörers tillfälliga behov vilket har gjort att inget standardiserat arbets- eller kommunikationssätt finns.

This study aims to analyse textbooks used in the course Religious Education 1 in Swedish upper secondary schools. The textbooks were analysed by using qualitative content analysis. By using queer theory and the theory about ?homo religiosus?, the study examined which norms concerning sex, gender, sexuality and relationships the textbooks convey.            The study shows that the textbooks convey norms about sex and gender by portraying the men?s perspective when educating about the different religions. The women perspective is being discussed in a specific part of the chapters and is therefore being portrayed as different.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

This report consists of a discussion about suitable methods for studying complex sociotechnical systems that are still being developed. There are large economical advantages with studying new systems before they are completely developed since problems can be discovered early and thereby avoided. It is, however, difficult to study developing systems, there are methodological limitations. These limitations are discussed and recommendations for studying non-existing complex sociotechnical systems are presented.The report is based on experiences from a study of the introduction of a shipboard helicopter on the corvettes that the Swedish Armed Forces are developing. A shipboard helicopter implies high requirements on the hosting ship.

The purpose of this report was to increase knowledge regarding the co-operation between social services from the perspective of employees at a school. The focus was on the question: ?In the schools view, what is the relevance of co-operating with social services?? The problem was divided into three categories; the value of the co-operation, the schools discourse on co-operation and the balance of power in the co-operation. The scientific topic was addressed using a qualitative survey method at a school. Four people were interview; the principal, the welfare officer, and two teachers.

The main focus of this master?s thesis concerns the relation between subject representation, power and gender. Classification systems and subject heading lists are products of their cultural and social context and some subjects and disciplines are given a greater value than others. Our aim in this thesis is twofold; to discuss and critically analyse the prevailing gender norms that are expressed trough classification systems and subject heading lists and to examine how they manage to represent gender studies as a multidisciplinary subject in theory as well as in practice. We are also discussing the particular problems with the representation of multidisciplinary subjects in general.

As organizations are generating more business intelligence in their systems, more employees need access those systems. As a result some sort of permission management needs to be implemented to ensure the information remain safe. Access Control Matrix (ACM) is one way of managing permissions and is widely used among organizations. The issues that comes with ACM is that the matrix itself gets difficult to manage and overview as its complexity increases with the number of permissions. The study utilizes Action Design Research to develop a tool for visualizing permissions.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

The aim of this thesis is to analyse the most common economic effects of countries pursuing trade facilitation. Trade flows are constrained by non-tariff barriers and through trade facilitation these barriers can be decreased. We will study the effects of trade facilitation from a theoretical perspective and evaluate a number of empirical studies. Several different trade barriers will be identified as well as those regions and countries that will gain the most from trade facilitation. We draw the conclusion thatlarge gains would prevail for all countries and that the consumers, businesses and the state all benefit from trade facilitation.

In today's producing companies, there is a high demand on early integrated productdevelopment. One way to facilitate communication between departments and collaborationbetween people and thereby enable early sharing of product information within the companyis to use PLM, Product Lifecycle Management.The CAD environment at Scania is at the moment being upgraded from Catia v4 to Catiav5. In this stage it is important that also the interacting computer systems in Scania?s PLMenvironment are adjusted and in the future join the development. Scania has an idea of howthese systems will be developed as the transition from Catia v4 to Catia v5 is being carriedout.

ABSTRACT: Commercial swab transport systems are used for collection and transporting of fecal and other microbiological samples. This system must maintain viability and contribute to survival of microorganisms during transport to the laboratory. Four swab transport systems have been compared, eSwab, ?- Transwab and fecalSwab, all three with flocked swabs, and Copan Venturi Transystem with rayon swabs. The study followed the recommendations from the Clinical Laboratory Standard Institute; document M40-A for recovery of Samonella, Shigella, Yersinia and Neisseria gonorrhoeae after storage for 0, 6, 24, 48 and 72 h at room- (22-25°C) and refrigerated (2-8ºC) temperature.