Mikrotransaktioner är en stor del av dagens internethandel. Det används flitigt på både websidor och i datorspel. Denna rapport tar upp hur ett företag eller en privatperson kan, genom A/B-testning, testa vilken transaktionstyp som är bäst för just deras applikation. Problemet är att det finns många olika transaktionstyper att välja mellan och att det inte finns något bra sätt att få fram vilket som är det bästa för just din applikation. För att försöka hitta den optimala transaktionstypen utnyttjades en testapplikation med olika transaktionstyper.

Judged by appearance. This is the conclusion of research made on shopper behavior that revealed that consumers tend to go by their instinct when evaluating vacuum cleaners in a purchasing situation. Many buy the first vacuum cleaner they interact with and few buy pre-planned brands. Almost none even turn the machine on before taking a purchase decision.Electrolux Floor Care Europe has their factory for vacuum cleaners in Hungary. Increased competition from China makes it harder to "only" produce vacuum cleaners with good performance.

In Shop! Daniel Svensson is studying the Public Consume Conversation during the 90´s. Focus is based on two local papers in the Swedish town Norrköping and the Public Media Conversation, which these two represent. What kind of discourses has been dominating this conversation, that is the most important question in Shop! To answer this, Daniel Svensson uses the Critical Discourse Analysis, by Norman Fairclough, as an analytic tool. This method provides him with the possibility to connect the micro level of text with the macro level of the society. But this demands theories of the contemporary society at a macro level.

Nowadays naval units are participating in international missions, where new and in many cases tougher conditions will affect their propulsion. This essay deals with some of the now developed nanostructure coatings and gives a presentation of how the coatings could function on some exposed parts of the naval powertrain. The essay investigates the possibility that the coatings can be used as a protective layer that will reduce or prevent wear on selected parts of the naval powertrains. As a basis for the essay, nanotechnology is described, as well as different reasons that wear occurs and application techniques for coatings The conclusion is that nanostructured coatings can be applied and provide a much better result on hardness and wear resistance as of naval powertrains compared to micro-structural coatings, both for manufacturing and renovation. The essay presents a few examples of the military utility of the nanostructure coatings as well as suggestions for further research..

Concrete is one of the world?s most common construction materials and is composed of 70-80 % stone material. Today crushed stone is used as aggregate in concrete in order to replace natural aggregates due to strong environmental reasons. Stone crushing yields flaky material and in this thesis studies are made on the flaky particle shape and how it influence properties of concrete such as workability, rheology and strength. The concrete recipes used in this thesis have fixed values, the only variable is the flakiness of the crushed stone.

This report presents a thesis project conducted by two students at Mälardalens högskola. The project covers 15 points in industrial design and was conducted during April to June 2014. The principal of the thesis works at Plastic Produkter. The assignment was to develop equipment for an effective way to dose, mix silicon, fill a special designed plastic bag and then seal it. The bag is then formed into a breast model.When a customer for various reasons decides to do a breast augmentation or a breast reconstruction, there may be doubt or uncertainty about the result.

AbstractThe project "Sound and Play" have been implemented in collaboration with the toy company BRIO in Malmo. The purpose of the project was to examine whether and how BRIO in the future could develop toys around sound for Toddlers.The problem formulations that would be answered after completion of the project was "How could BRIO broaden its product range with the help of audio toys?", "How can you combine toys and sounds in an interesting way for children?", "How do you create a toy with sound that is fun for the child, but not annoying for parents?". Currently BRIO only has two toys with sound in this age group.The expression of the toy was going to be a mix of classic and cool and the overall feeling of the toy was going to be explorative and arouse curiosity in the child. This feeling would be communicated through simplicity and joy.

The production of cut flowers has diminished in Sweden and the remaining growers produce mainly in greenhouses. This situation could be changed if hardy, garden perennials suitable for Swedish conditions were to be used as cut flowers. A grower with suitable equipment as plastic tunnels or houses would be able to provide florists with an attractive assortment of perennials for cutting, during an extended selling period compared with the natural flowering period for these cultivars. This assortment would be based upon imported perennials already used by florists, but would also contain new products. To investigate the demand for locally field grown perennials as cut flowers, an inquiry took place.

In 2003 the recommended phosphorus allowance for dairy cows in Sweden was lowered approximately 10 %. For a cow at a production level of 35 kg ECM it decreased from 0,40 to 0,36 % of dry matter. To investigate if the decrease has been implemented at farm level, analysis of following minerals; P, Ca, Mg, K, Na, S, Se, Cu, Mn and Zn was performed on the TMR at 20 farms in Sweden in the summer of 2004. The purpose was to describe the actual allowance of different minerals as compared to the new recommendations. One hypothesis was that the decrease in recommended allowance of phosphorus would lead to the need of new mineral feeds on the market.

This exam report has been developed in association with Strangbetong AB, Sweden.The natural gravel that is being used as fine aggregate for concrete production today is an ending natural recourse and the Swedish government has decided to strongly reduce the extraction from the year of 2020. The only reasonable replacement is aggregates from crushed rocks but this material has other properties than natural aggregates. The concrete manufacturers now have to learn how to use these new fine aggregates in a cost effective way in order to ensure the quality of their concrete production.In this project, crushed aggregates and combination of crushed and natural aggregates have been tested with existing formulas for fresh concrete. The two parameters yield stress and plastic viscosity have been measured which gives a good description of the workability of the fresh concrete. Different methods to make measurements on the dry fine aggregates, has also been tested, to find out if there is any correlations between these parameters and the parameters from the measurement on the fresh concrete..

In this thesis we examine the relationship between board composition and firm performance in Swedish companies. The selection of companies includes all Swedish limited liability companies, with the exception of micro enterprises, that have been active between the years of 2009-2010. We develop hypotheses based on resource dependence theory, agency theory, and the resource based view, and test these with regression analysis against collected data. Specifically, we examine the effects of board diversity, outside directorships, and CEO duality. Our findings show that none of the theories provide sufficient explanatory power of the relationship between board composition and firm performance, and that further research is required to better understand the role and effects of company boards..

The vertical electronic excitation energies for the narrow-bandgap polymers LBPF, EP37 and EP62 have been calculated using Density Functional Theory (DFT). Also the vertical excitation energies for the acceptor unit of LBPF have been calculated using the Hartree-Fock (HF), DFT and Coupled Cluster (CC) methods. The calculations cover the visible and infrared wave length region and two strong transitions are obtained, one corresponding to the pi to pi* transition and one corresponding to the pi to Acceptor transition. The excitation energies obtained from DFT are below the corresponding experimental results and attempts have therefore been made to perform bench-marking calculations using a hierarchy of CC methods..

This essay has been made on behalf of the co-operative society Mäster Grön, which is selling ornamental plants to retailers in Sweden. The aim of this study has been to find out what added value Mäster Grön gets from their co-branding with the Swedish Seal of quality. The main topic of discussion was; how much value added does this co-branding give to Mäster Gröns pot plants? Are there differences from a customer point of view in value added between a garden center and a retail store? How much weight does the costumer put on the branding when buying a plant? Does the customer know what the values of Mäster Grön and Swedish Seal of quality mean? Two questions of lesser worth were asked to the consumers about what they thought about the protective plastic around the plant, and if they were interested in getting more information about the origin as well as the method of production of the plant. The study was divided into two parts, one in which customers were observed and one where the customers answered a survey.

På elmarknaden har man utvecklat fenomenet mikroproduktion av elenergi vilket innbär att slutkunden själv ska producera sin el främst genom att utnyttja sol och vind kraft. I Sverige finns det ett växande  intresset för mikroproduktion. De flesta som producerar sin egen el gör det främst genom solpaneler och mindre vindkraftverk som sätts upp vid deras egendom. I den här studien har vi gjort en djupare analys kring olika typer av anläggningar för att producera småskalig elkraft. Men även tittat på den ekonomiska aspekten genom att beskriva ekonomisk vinning och kostnader samt ställt upp en kostnadskalkyl för att beskriva detta i siffror.

Ericsson?s factory in Kumla, Modules Kumla, became a hub for radio modules and micro base stations, which enables mobile communication through radio base stations, in 2004. Because of this the factory focuses more on the logistics operations. This has led to a need to be able to plan the capacity for the materials handling system. This master thesis has therefore been performed at Modules Kumla to develop a capacity calculation model for the material handling flow during the autumn of 2005.The work has contained a mapping of the material handling flow regarding to which activities was performed and how much time they consumed.