How do the police prevention Methods work against juvenile delinquency? The purpose of this study is to see how the police work to prevent juvenile delinquency in two municipalities in Stockholm, Södertälje and Sundbyberg. Additionally, the purpose of this study is also to find out if there are any similarities or differences between the police Methods the police use in these two municipalities. We have used qualitative method in which we have interviewed the police and young people from the communities. We interviewed young people to see their attitudes to the police and the area to find their perception of police work in the fields as well as the police forces attitude toward the young people.

Högbytorp is Ragn-Sells? largest waste facility and it is located north of Stockholm. There is an old landfill still in use, but at the end of this year it will be closed. The waste deposited on the landfill can, through decomposition, give rise to a large amount of methane gas, which is an energy rich gas that can be used for heat and electricity production. To receive a relatively large amount of gas, the decomposition requires a high moisture content in the waste.

Prioritisation of software requirements is a critical part of the development of software. Whichrequirements and in which order they will be developed is one of the main tasks that requirementprioritisation supports.There are different ways that a requirement prioritisation can be used, for example alone or in agroup and with different Methods.The purpose of this report is to map out how you can carry out a requirement prioritisation alonewith different types of prioritisation Methods and how you solve the problems that can arise whenprioritisting requirements. This is done by documenting the use of three different types of Methodsthat can be execute alone. The Methods are "100-dollar test", "Ranking" and "Top-tenrequirements".To be able to prioritise requirements, you need to establish which requirements you shall prioritise.The paper retrieves this information by interviewing stakeholders in the system and analysing theresult of the interviews and the execution of the requirement prioritisation.Three problems arose during that work and I present solutions on these problems. The problemswere 1) equivalent requirements when using the "100-dollar test", 2) low differentiation gradebetween the prioritised requirements in the "100-dollar test" and 3) that the requirements that wereprioritised weren't classified before the prioritisation, which leads to inaccuracies in the resultingprioritisation.The solution to the problems that the paper presents is to increase the amount of distributable unitsin the "100-dollar test" to 1000 per requirement, suggestions of classes of the requirements andthe combination of the Methods "100-dollar test" and "ranking" to bypass the equivalentrequirements.The report is written in Swedish.Nyckelord: GoTRIS, requirements retrieval, requirements analysis, Viktoria Swedish ICT,requirements prioritisation, requirements, 100-dollar test, ranking, top 10 requirements..

Skin temperature is detected through signals in unmyelinated C-fibers and thin myelinated A?-fibers in the peripheral and central nervous system. Disorders in thin nerve fibres are important and not rare but difficult to diagnose by the most common neurophysiological Methods. In this pilot study different Methods for quantitative sensory testing, QST, were compared to give some ideas about which method could be the most efficient to use in order to point out injuries of the sensory system in clinical practice. The comparison was made between Békésy (separate warmand cold thresholds) and Marstock test (combined warm and cold thresholds).

Amongst the published literature researching wet cleaning of paper there is a limited amount of studies conducted researching the method simmering water treatment. There are even less studies conducted on how simmering water affects the paper being treated when used as a cleaning method. Despite the limited research, there are literary reviews describing the method and suggesting it as an alternative for conservation of paper with iron-gall ink. The following study will therefore be examining, the somewhat unusual method, simmering water treatment, and comparing it to one of the more common wet cleaning Methods: immersion washing. This is done to compare how the different temperatures of the water affect the paper. The types of paper used in this study consists of three dyed and four undyed papers. All of the papers are new, apart from one sample originating from 1847.

ABSTRACTMany wind turbines have problems with icing and there is still no effective method to de-ice without stoppage of production and power loss. Here I therefore consider other Methods than those available today, and particularly, I consider how these Methods could be applied to wind turbines of the company Oxel. A surface where the water droplets do not attach might be the basis for a useful method. If no water attaches, no ice could form. To accomplish this a hydrophobic surface is nessesary, for example wax.

The point of the study is to investigate educational and vocational counselors' strategies on drop in calls. In order to answer the purpose, the issues concerning the educational and vocational counselors' strategies and guidance models/Methods at drop-in calls investigated.Qualitative interviews were conducted with six educational and vocational counselors'.In the study it appears that the educational and vocational counselors' are unable to have any strategies for drop-in conversation because the applicant will come spontaneously and the educational and vocational counselors' lack information about the individual and its purpose of the interview. Guidance models/Methods designed to facilitate for the applicant and give them a sense of understanding about them selves there environment and results in a clarification of the election, not often used during the drop-in calls.These are not often used due to the lack of time because the intention of the call is to provide with information to the applicant in as little time as possible. In an educational and vocational counselors? perspective the guidance that is offered at drop-in calls defective..

Abstract (in English)The task for the diploma work was to develop Methods for measuring of moisture content by the Karl Fischer method, in jam, jelly sweets, and fudge.The start premises was a for the company whole new equipment, which should be started up. Then programs should be developed for different kind of samples.In the task it was as well included to develop Methods for dissolving the different kind of samples, since the Karl Fischer method demands completely dissolved sample material..

The aim of this study was to examine how the activities of two preschools develop the language in matter of the teacher?s work of procedure. The following research questions were essential for the survey and therefore formed the basis of the examination:How do the teachers in both preschools work in a language evolving way?What significance does the environment have for the language development?Are there similarities and differences between the preschools in their language development approach?The study is based on a qualitative method, where the teachers of both preschools were interviewed with the purpose of obtaining information. The teacher?s statements and interviews were analyzed in relation to previous research, where the theories of different writers form the base of the theoretical connection to the study.The teachers view in developing the language regarding to their aspirations in measuring the language an important position in their operation, can be portraied as the conclusions of this study.

The objective of this study was to study the agreement between two Methods of indirect bloodpressure measurement in dogs and cats and to establish the within-method variation for the Methods. The utility and practicality in the clinical setting were also evaluated for the both Methods. The techniques evaluated were the oscillometric method and the Doppler ultrasonographic method. Thirtytwo dogs and 26 cats were used in the study and seven dogs and five cats out of these animals had diseases that may effect the bloodpressure. Bloodpressure was measured in both anesthetized and in conscious animals.

The purpose of this paper is to examine the three main translation Methods used in experimental Cross-language Information Retrieval CLIR research today, namely translation using either machine-readable dictionaries, machine translation systems or corpus-based Methods. Working notes from research groups participating in the Text Retrieval Conference TREC and the Cross-Language Evaluation Forum CLEF between 1997 and 2000 have provided the main source material used to discuss the possible advantages and drawbacks that each method presents. It appears that all three approaches have their pros and cons, and because the different researchers tend to favour their own chosen method, it is not possible to establish a "winner approach" to CLIR translation by studying the working notes alone. One should remember however that the present interest in cross-language-applications of information retrieval has arisen as late as in the 1990s, and thus the research is yet in its early stages. The Methods discussed in this paper may well be improved, or perhaps replaced by others in the future..

The thesis analyzes two different approaches towards responsive web design, Mobile-first and Desktop-first. Responsive web design is a concept for websites whose design is customised based on the screen size. The analysis is performed by collecting views on the Methods and also analyzing the usage of mobile and desktop internet to create a prototype of a responsive website where both Methods are beeing used.The main difference between the Methods is the foundation, where one is designed for mobile and the other for desktop. The thesis indicates that Mobilef-irst gives a better result for the mobile, which unlike the computer has poor performance, smaller screen and poor internet connection, therefore an advantage for the device that needs more focus to maintain a fast response. Desktop-first does not take this opportunity, but focus instead on the computer where the performance is better, which leads to a unnoticeable difference in response time.

Well-functioning bicycle paths are relevant issues in today´s society as a way to increase active transport. Active transport means working for a better global climate, urban environment and public health. What we experience on a bicycle affects the choice of a bicycle path and is a subject where there is much left to explore. This essay examines Methods in environmental psychology literature that measure the experiences of landscape. The aim is to find and apply Methods to measure the experience of two bicycle paths in the Skåne plains.

AbstractMy feature career as a teacher, for the early years of compulsory school, makes it interesting to finding out of how teaching religion can be donned. I am interested in what Methods can be used for teaching religion That?s why my purpose aims to find out how five different teachers, of the early ages, works and what Methods they use while teaching religion. My issue for this composition is: what Methods, or to a point - Methods supported by different teaching models, can be used for studying religion in compulsory school? Empirical and specialized literature points in the direction fore Methods like storytelling, load reading, drama, group works, independent searching of information, working books and so on.

This diploma work has been conducted for the consulting company Ramböll inUppsala, Sweden with the purpose to perform a study with the calculation programFEM Design 9.0 made by Strusoft. The aim has been to find out if it is possible to gainadvantage by utilizing more advanced 3D software for design calculations, instead ofthe traditional Methods currently used in construction works.The method of approach has been to model an existing warehouse building with theprogram FEM Design, and then compare the results with those attained with FrameAnalysis and hand calculations. These results are then analyzed. An evaluation is maderegarding to what benefits can be achieved using a more advanced 3D-model.The results of the study show that the differences between the Methods are not ofany significance with regard to the design of the steel frame. However in morecomplex materials such as reinforced concrete, the differences become more notable.The conclusions drawn by the authors of this study into FEM Design are that theeducation requirements of the program are higher than for simpler programs, whosepurpose are solving predetermined problems.