This thesis assignment at C-level is focused on calculation models and prediction methodswhish can be used in the stage we call ?prospecting? of possible windmill locations. Thelocation is southeast of Halmstad at the Farm ?Stjernarpsgods?. The rapport has two mainareas directed towards this task.

Energy costs are high nowadays and that is the reason why the energy consumption needs to become as small as possible in most of the companies. To accomplish the small energy usage one needs to map the energy flows, study them and monitor them. One method that can be used for this is energy balance calculation. The method gives an opportunity to separate different energy flows and see where each flow is heading. There is also another method which is more advanced than energy balance calculation.

The purpose with this work is to investigate the cost to produce piglet in a case study company. The starting point is going to be the agriwise (www.agriwise.org) calculation which I am going to change and adapt to the case study company. To day the pig market is bad but we have probably reached the bottom. The market has started to rise. It is no business to produce piglets today.

In this master thesis outage statistics covering tree years from two distribution grids are analyzed with the purpose to deduce which factors yield outages. The statistics are extensive therefore allowing in-depth analysis of both customer and system related factors. From this starting point and as a model of explanation energy not supplied is studied as the consequence and the measurement of the inconvenience caused by outages. Different methods for calculating energy not supplied are developed and studied and put in comparison to the method used in Network Performance Assessment Model, which is the Swedish frame work for regulating electricity distribution.Analysis of the outage statistics show a relation between the type category of customer and outages that can be deduced to the variance and the density associated with that customer category. Prioritization of different customer categories is elevated also in this aspect.

This thesis concerns how the power quality in the grid is affected by the connection of wind power plants. As things are at present, Fortum Distribution AB has a number of wind turbines and wind parks connected to the own grid. As the pressure on building and connecting additional wind power is increasing, so is also the interest of how the already existing wind power generation affects the power quality in the nearby distribution grids. The study is performed by direction of Fortum Distribution AB and is limited to the 10 kV/40 kV-grid in Bohuslän, Sweden. The methods for calculation of power quality are compared to the results of a number of measurements.

This is a diploma thesis executed as a part of the examination of the educationalprogram Building engineer ? Construction management at Halmstad University. The aim of the thesis is to compare and evaluate conventional open-cut pipe-laying withhorizontal directional drilling. The thesis includes a comparison of the economic,environmental and time-based aspects of both methods and discusses which factorsthat determine the optimal choice of method.The study is mainly based on previous studies regarding the subject and oninterviews with professionals from the industry.A fictional project with five realistic cases of pipe-laying scenarios was compiled,sent to different companies for calculation, evaluated and compared. Our conclusionregarding when it?s suitable to use which method is entirely dependent on thespecific project.

To build high-rise buildings made of timber has for long been limited by national laws, due to the lack of knowledge in engineering solutions. Frame structures made of wood has for a long time been associated with major fire hazards and consequently lower safety and this connection is still being made today. The increased environmental awareness in recent years has contributed to the exploitation of indigenous building materials, including wood from our own Swedish forests and has become increasingly common. Increased knowledge about how structures behave in fire and how they can be protected in order to achieve safe timber structures has resulted in a growing interest in these structures in the construction industry. Research in the area is constantly updated and new laws allow any number of storeys in wooden buildings in Sweden as long as the performance requirements are fulfilled.The main part of this work has involved calculations of the fire resistance and load bearing capacity of floor and wall constructions.

Environmental impact and management of energy is a highly topical issue in today's society. Climate impact must be reduced. The Government has set a target to reduce energy consumption in buildings by 20 % by 2020 and 50 % by 2050 compared to the energy use in 1995.With this in mind, we chose to examine how property owners can work on improving energy efficiency in existing apartment buildings. We also wanted to investigate profitability of different increasing energy efficiency measures and the calculation methods and the risk assessment performed by such investments. To tie in with government objectives, we also saw the possibilities of achieving these goals.20 companies were interviewed, of which 14 were property owners and 6 were consulting firms that works with energy efficiency.

The globalization that has occurred during the last few years has made it more important for companies to have a well-functioning logistics system. Customers demand more options, which lead to an increased flow that creates greater demand regarding packaging and transports. Diverse logistics costs are nowadays a substantial cost for many companies. Therefore, more effort is aimed at optimizing transportation to lower these costs.The purpose of this project is to create a user-friendly calculation of logistics costs that illustrates how the costs vary, depending on how the flow is structured. This is done by examining which aspects that affect the total logistics costs and by mapping which aspects that should be included in a calculation of the logistics costs.Literature studies have been carried out parallel with empirical studies at Scania's production unit, MC, in Oskarshamn.

The purpose of this paper is to standardize and simplify the design work on a few specific types of storage brackets for balconies. The company Balco AB had the wish to simplify the design work in the preparation of attachments to their balcony structures. This would be done by a calculation matrix that could be produced which then in turn could be used for each new project by the company. The design work behind the development of these fittings at each new project is costly both in terms of time devoted by each calculation but also the cost of the time. The purpose of this report is that in a systematic manner, a calculation matrix can be created that then the company instead may follow from each new project.In carrying out the project used HILTI calculation program, which was provided by the company HILTI.

This is a master thesis work carried out at the Department of Energy and Environment atthe Division of Electric Power Engineering. The master thesis work describes the theoryof distance protection relaying in 130 kV meshed distribution networks. The main aim ofthe thesis was to construct an Excel application for calculation and documentation of thesettings for distance protection relays. The program is based on general methods forcalculating settings of the different zones for the distance relay and presents the settingsin simple graphics using quadrilateral characteristics.The reason for building an Excel based application is the great variety of distanceprotection relays in live networks. The manufacturers of distance protection relays makeprogram for documentation available, however, they are based on the typical settings forthe specific relays.

This diploma work has been conducted for the consulting company Ramböll inUppsala, Sweden with the purpose to perform a study with the calculation programFEM Design 9.0 made by Strusoft. The aim has been to find out if it is possible to gainadvantage by utilizing more advanced 3D software for design calculations, instead ofthe traditional methods currently used in construction works.The method of approach has been to model an existing warehouse building with theprogram FEM Design, and then compare the results with those attained with FrameAnalysis and hand calculations. These results are then analyzed. An evaluation is maderegarding to what benefits can be achieved using a more advanced 3D-model.The results of the study show that the differences between the methods are not ofany significance with regard to the design of the steel frame. However in morecomplex materials such as reinforced concrete, the differences become more notable.The conclusions drawn by the authors of this study into FEM Design are that theeducation requirements of the program are higher than for simpler programs, whosepurpose are solving predetermined problems.

Calculations are an important part of planning around a construction project. From concept to completion of the project calculation is a tool to try to predict the actual cost. During the production stage in particular, deviations occur which makes the actual cost different from the calculations.This thesis is done in collaboration with JM Residential Stockholm. The study includes a cost follow-up in which a comparison was made between the calculated production cost and actual cost for the five projects. The aim of the study was to observe the most common reasons that a project deviates from the calculated production cost and then summing these causes in a number of categories.

In this work, a method was developed and evaluated for calculating the life of welds under the influence of fatigue loads from a vibration environment. Typically, a shaker table is used for testing a component against vibration loads. The shaker table creates a vibration environment that is defined in the frequency domain by a power spectrum.Similarly, a virtual vibration table can be used to calculate the same type of load environment, which can then be used to calculate the expected lifetime. The benefit of this method is that it can be used in design, as well as in simulation of tests before physical verification tests are carried out.Today there are methods for calculating fatigue life of non-welded base material, but since many components contain welded joints, there is a need to apply this method to those types as well. To achieve this, the thesis combines two different areas, which together provide a method for fatigue assessment of welds using a virtual shaker table.The methodology is carried out by modeling the component, and its welded joints, in a finite element program.

This thesis has been focused around the Diels Alder reaction with the goal to design an enzyme catalyzed reaction pathway. To achieve this goal computer aided enzyme design was utilized. Common traditional methods of computational chemistry (B3LYP, MP2) do not do well when calculating reaction barriers or even reaction energies for the Diels Alder reaction. New calcu- lation methods were developed and tested. This was the focus of the first part of the thesis, by choosing a small system, extensive and heavy calculations could be done with CBS-QB3.