The Swedish government have a goal that wind turbines shall produce 30 TWh by the year 2020, compared to about 3,5 TWh produced in Sweden during 2010. To minimize the disturbance that wind turbines create the Swedish Environmental Protection Agency has stated a guideline value that noise from wind turbines at nearby residents shouldn?t exceed 40 dBA, at 8 m/s wind speed. With advanced calculation models, like Nord 2000, the emitted sound from future wind turbines can be calculated at an early stage to optimize the power production without exceeding the 40 dBA. When the turbines have been built there is a need to verify that they really are within the guideline.

Simulation of different systems can be done using a graphical model description of the system based on block diagrams. The simulation software Matlab/Simulink offers a lot of possibilities to describe a huge number of systems, which can be linear as well as nonlinear. The simulation using Matlab/Simulink is done by integration based on different kinds of numerical methods.When nonlinear Simulink-models are simulated, it is often interesting to apply a Kalman filter to handle the noise that may occur within the process as well as corrupting the measurement. However, application of such a filter leads to an extensive time-consumption despite using fast computers. The reason is that the existing Matlab functions are not constructed for time optimal evaluation.

Introduction: Every year about 450 women in Sweden are diagnosed with cervical cancer, almost 200 die and thousands undergo surgery because of cell changes in the cervix. A HPV infection can lead to cervical cancer and therefor costs for the society. The implementation of a vaccination program against HPV is a way to avoid these costs. Aim: The study aimed to calculate the economic impact of the HPV- vaccination program for children in Sweden through a cost-benefit analysis. Method: In this analysis, status quo was compared with non-administration of the HPV-vaccine for the selected cohort of ten-years-old girls in Sweden.

Operators and Internet service providers invest in broadband to be able to deliver new services that require higher data transmission rate. A way to make this possible is to use ADSL, Asymmetric Digital Subscriber Line, as the access technology. To be able to handle this technology, the service providers should do a pre-qualification. Methods and tools are needed to analyze the local copper lines and decide if these qualify for ADSL with respect to service availability and possible bandwidth through the lines. This report brings up some methods for pre-qualification of ADSL, the important quality parameters and how to gather them from the available services today.

Background: Insufficient nutritional support is associated with prolonged hospitalisation, impaired wound healing and impaired survival for patients in intensive care. In severe sepsis and septic chock, calculation of nutritional need is complicated since the metabolism is affected by decease. Aim: The aim of the study was to investigate nutritional support and to examine the quality of nursing documentation of nutritional status and nutritional support in patient records in severe sepsis and septic chock.  Method: The study was conducted as a retrospective investigation where 64 patient records were studied. The quality of documentation was examined in 10 patient records using an examinational model.Findings: Calculation of average nutritional support showed insufficient supply particularly in the two first days of intensive care. During the next five days nutritional supply was higher but individual variation was seen, why a clear picture of nutritional support is hard to detect.

Mould is a common contamination in cereals. The growth of mould can stimulate mycotoxins production andsome of which at critical concentrations cause health problems in humans and animals. Fusarium is one of thefungus species that has been found in crops and can cause major problems for farmers such as reduced harvestand economic losses. A group of Fusarium species, Fusarium avenaceum, Fusarium poae and Fusariumtricinctum express a mycotoxin, enniatin. The limited information available today about enniatin-forming fungiis that they grow out on fields of wheat in colder climates.

This thesis studies the customer relationships and customer accounting methods used by a Swedish fashion company. The aim is to test the empirical applicability of the relationship based framework developed by Lind and Strömsten and to explain potential differences between empirical observations and theory. The framework is based on the categorization of four customer relationship groups and the appropriate customer accounting methods to be used for each relationship. The fashion company, that recently assessed the profitability of its customer base in an aim to implement a new customer strategy, is the object of the qualitative case study. The case study reveals that all customer relationships are to be found at Whyred, except the connective customer relationship.

On today?s competitive market, it is difficult to achieve profitability trough high prices on manufactured products. Profitability must be obtained through low manufacturing costs, high quality and short lead times. One of the companies on the market is Sandvik Coromant, manufacturer of tools and chips for metal cutting. This master thesis investigates the methods of manufacturing for boring bars at the manufacturing unit GVH4 at Sandvik Coromant in Gimo, Sweden.

Total organic carbon (TOC) and chemical oxygen demand (COD) are two methods used for measuring organic pollutants in wastewater. Both methods are widely used but the COD method results in production of hazardous wastes, including mercury.The purpose of this study was to validate the method TOC that will replace COD and find a factor to convert TOC to COD. In this study 26 samples were analyzed from four sewage treatment plant in the municipality of Enköping.The results show that the COD method could be replaced by the TOC method.The factor for COD/TOC was between 3.1 - 3.3. Both methods will be used in parallel until 2013 when it will be forbidden to use the COD analysis..

Abstract People who have problems with the written language will face serious difficulties in todays society. Our social structur is based on the criterium that every individual has to be able to read and write, and for this reason it is important that pupils with learning difficulties receive help. The purpose of my investigation is to examine how children with reading- and writing difficulties can benefit throught creative methods. Children with reading- and writing difficulties are in need of these creative methods that exist today. Amongst all of our public healht issues, dyslexia is one of the biggest problem we have today and children are therefor in need of these creative methods. Through  qualitative interviews with two educationalists there has been established thad the creative way of working benefits children in many ways if it is preformed correctly.

How does IT-consultants reason in their consulting process regarding the development of a clients IT-based internal recruitment system? The purpose with this paper is to investigate how an IT-consultant is reasoning in a consulting process and investigate whether consultants are using established models and methods in their work. We have chosen to work with a qualitative examination to attain our purpose. In our work gathering the empirical facts we have been working with a case study, an observation and a simulation exercise. The combination of these has made it possible to carry out the paper and produce the most correct data possible. Conclusion: We state that IT-consultants do not use any theory-based methods, they use process methods created by themselves and their company.

Problems:How would a decision model that takes into account more aspects and dimensions than just the financial aspect look for smaller service compa-nies? What aspects are important to consider in such a decision model?Purpose:The purpose of this master thesis is to develop a decision model based on previous research, to improve decision making in smaller service com-panies ? by considering perspectives that traditional investment calcula-tions ignore.Method:The study was qualitative and was based on both primary and secondary data. As data collection method for the development of the model we used literature search on previous research. The study?s primary data consisted of responses from five smaller service companies.

ABSTRACTBackground Calprotectin is a protein found in the cytoplasm of neutrophile granulocytes. In the course of inflammatory bowel disease (IBD), calprotectin is released during chronic inflammation in the gut. Activation of neutrophils during the inflammation is followed by activation and secretion of pro-inflammatory molecules such as calprotectin. Calprotectin is stable in stool up to 7 days and can therefore be used as a non-invasive marker for diagnosis, treatment and measurement of the disease activity in patients with IBD. The most common method for analysis of calprotectin concentration is ELISA.

The process of drug discovery is very slow and expensive. There is a need for reliable in silico methods; however the performance of these methods differs.This work presents a targeted study on how the drug discovery methods used in OpenEye?s tools ROCS, EON and FRED perform on targets with small ligands. It was examined if 12 compounds (markers) somewhat similar to AMP could be detected by ROCS in a random data set comprised of 1000 compounds. It was also examined if EON could find any electrostatic similarities between the queries and the markers.

The object with this work was to create a simple feeding program for beef cows. Another object was that I could learn more about the properties and functions of Excel and Visual Basic. I used parts of a program I designed a few years ago. This old program was neither user friendly nor had it an appealing layout. Initially I decided how I wanted the new program to appear and on which foundation it should be built. I designed various forms into a spread sheet, such as lists and multiple choice buttons. Using VBA (Visual Basic for Application) I could create macros, which used the information chosen in the lists and with the multiple choices to calculate the feeding requirement or the feeding plan.