This thesis deals with different methods for measuring moisture-related dimensional changes ofwood. Typically relative humidity is measured to determine if the ambient climate around anobject is harmful to it or not. Values between 40 to 65% RH are recommended for hygroscopicmaterials. To know how a wooden object actually reacts to changes in the surroundingenvironment requires methods that involve the object itself. Because of the wood anisotropy,differences in wood structure, finishes and other restraints, it is not always possible to predict themovements.This paper addresses various measurement methods, primarily methods that have been testedin the field of conservation, with examples of their use.

This bachelor thesis discusses various difficulties with architectural paint research. The difficulties are exemplified through a case study ? a paint research on a furrowed string-course in the southern vault of the Royal Palace of Stockholm, which was carried out November ? March 2009-2010 on behalf of Statens Fastighetsverk. The paint research was made in order to receive information about the string-course and to get inspiration for a renewed color scheme on it. The base material of the string-course is Gotlandic sandstone and the surface of it is furrowed.

This thesis engages the topic of test methods for wood adhesives. Two test methods were evaluated, EN 302-1, a European standard, and ASTM D905, an American standard. The total amount of specimens manufactured and tested was more than 500. The adhesive bonds were tested in shear with an increasing load on the specimen until failure.The adhesives used were epoxy-resin, phenol-resorcinol-formaldehyde and a 2-K polyurethane. The test programme included five different types of intentional errors per method, in order to investigate the sensitivity of the test methods.

The aim of this study is to analyze and describe the research front within information science. To reach this purpose we ask the following research question: Which research themes can be identified within the subject field of information science by using bibliographic coupling in combination with cluster analysis.The data for our study consists of articles from the journals Journal of the American Society for Information Science and Technology and Journal of Documentation throughout the years 2004-2006. The bibliographic information from the articles was analyzed with the combined methods of bibliographic coupling and cluster analysis. This gave fifteen clusters within which we identified research themes. When analyzing these results we found four main fields of research within the research front of information science: Information retrieval, bibliometrics, knowledge organization and information science as research discipline.

In November 2010, The Swedish Association of Local Authorities and Regions (Sveriges Kommuner och Landsting) distributed a survey where 53 % of the responding municipalities declared that they use Twitter. Out of the municipalities that declared they did not use social media, 49 % answered that they were planning on using it but that they had not gotten started. The purpose with social media was primarily declared to be maintaining dialogue with citizens and a channel for information.The informal ?twittersphere? is a new environment for the conventionally formal government communication, and with it comes an entirely new set of demands on the style and content of texts, compared to other media. The purpose of my work was to present a style proposal for the public sector?s communication on Twitter, with the help of theory and empirical data.My methods consisted of text analysis and qualitative interviews.

The purpose of this Masters thesis is to analyze the research front within medical ethics. We wish to identify which research themes that are included in the subject field of medical ethics. The research themes can be identified by a couple of bibliometrical methods and techniques. In our case, it is bibliographic coupling combined with a cluster analysis. The analysis is accomplished by the extracted references from articles in the two journals Bioethics and Journal of medical ethics.

Stunning of pigs at slaughter constitutes of primarily two methods; carbon dioxide and electricity. Both methods have advantages and disadvantages from an animal welfare point of view. The purpose of this study is to compare different methods of stunning pigs from a welfare point of view. Questions included in the study are 1) What differences are there, from an animal welfare point of view, between CO2 and electricity as methods for stunning pigs? 2) What alternatives are there to the methods currently in use? 3) Which method for stunning pigs is preferable from an animal welfare point of view?This report is a literature review.

Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.

Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.

A growing problem in Swedish herbicide free agriculture, the Canadian thistle has been the object of several new trials, seeking methods for non-chemical weed control. The new trials have mainly confirmed earlier experiences; that the most successful methods of control are springtime ploughing, repeated cutting and competition from a stout crop. Row hoeing has also been proven effective. As opposed to earlier recommendations, half season fallow has shown to be a risky and often ineffective method of control. Trials regarding biological methods have shown that above others thistle rust (Puccinia punctiformis) may have the potential of controlling Canadian thistle the future. .

Studies show that children?s and adolescents health decreases, especially the mental health. There are today many health methods that flourish in the school area. Methods that is external and used as individual interventions and methods that have the intention to integrate health in all aspects of the school curriculum.Research on health projects often show what the intervention or method has produced. Few studies have been found who discuss the pupil?s own experience regarding health projects.

The amount of web APIs that are open to the public is increasing fast. Both the free web APIs as well as the ones that cost money to access. Both bigger and smaller organizations, professional and non-professional developers use these web APIs to add value to their systems or use it to create new applications. This is an area study where alot of research has been done in the last few years. In spite of this there are still no user-centered evaluation methods for web APIs.

Prioritisation of software requirements is a critical part of the development of software. Whichrequirements and in which order they will be developed is one of the main tasks that requirementprioritisation supports.There are different ways that a requirement prioritisation can be used, for example alone or in agroup and with different methods.The purpose of this report is to map out how you can carry out a requirement prioritisation alonewith different types of prioritisation methods and how you solve the problems that can arise whenprioritisting requirements. This is done by documenting the use of three different types of methodsthat can be execute alone. The methods are "100-dollar test", "Ranking" and "Top-tenrequirements".To be able to prioritise requirements, you need to establish which requirements you shall prioritise.The paper retrieves this information by interviewing stakeholders in the system and analysing theresult of the interviews and the execution of the requirement prioritisation.Three problems arose during that work and I present solutions on these problems. The problemswere 1) equivalent requirements when using the "100-dollar test", 2) low differentiation gradebetween the prioritised requirements in the "100-dollar test" and 3) that the requirements that wereprioritised weren't classified before the prioritisation, which leads to inaccuracies in the resultingprioritisation.The solution to the problems that the paper presents is to increase the amount of distributable unitsin the "100-dollar test" to 1000 per requirement, suggestions of classes of the requirements andthe combination of the methods "100-dollar test" and "ranking" to bypass the equivalentrequirements.The report is written in Swedish.Nyckelord: GoTRIS, requirements retrieval, requirements analysis, Viktoria Swedish ICT,requirements prioritisation, requirements, 100-dollar test, ranking, top 10 requirements..

To assure good quality the software needs to be tested to find errors and to verify that the programme meets the customer?s expectations. Traditional methods are usually used in software development and means that a number of predetermined steps are followed. By using agile methods the development can more easily be adapted to the changes on the market. With these methods the testing is carried out continuously throughout the project.

Abstract The purpose of this essay is to find difficulties and risks in the re-engineering process when restructuring to Model-View-Controller (MVC). A thoroughly theory study has been conducted to be able to understand the important steps in the re-engineering process. The methods and concepts of this essay are re-engineering, UML, system development life cycle, design patterns and MVC. The science approach used is design science where the artifact being developed are a set of models.In the analysis phase of the process the system is analyzed. The result of the analysis is notes of difficulties found and models showing the structure of the system.