This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

The purpose of this study is to find out why the EU has not yet implemented the EuropeanCivil Peace Corps (ECPC), which the EU Parliament took a resolution about in 1999. Themore specific questions posed are whether the concept of ECPC has been redefined, whetherthe issue of ECPC has been prevented from coming up for discussion and decision-making,and what this has meant for the non-implementation. Steven Lukes' theory about the threedimensions of power is used in combination with a discourse analysis method. The materialused is documents from the EU Parliament's decisions and debate about ECPC, and ECPCfeasibility studies. In the analysis I find one "law and order"-discourse and one "peaceknowledge"-discourse.

The present work is a continuation of the ideas developed in previous projects during my Masters studies that explored the relation between pattern, form and space. Starting from the pattern multiplication for space construction the present project proposes textiles as an assortment of flexible expressions. The purpose of the project is to explore aesthetic and functional potential of textiles for out door temporary structures. This is to create a pattern interface which filters sunlight through a textile surface to offer instant sheltering solutions for out door activities. The project combines research and analyses of outdoor temporary structures and scope of textile in the area.

The purpose of this study was to examine whether the success of theconcept of empowerment in the field of social science can be explained by referring to it as the new paradigm replacing the former paternalistic era. Therefore, I investigate if the character of its history, domicile and practice has the same distinguishing features as the scientific progress. The analysis is based on Thomas Kuhn's definition of a scientific paradigm through the concepts of consensus, crisis and revolution. I also look for alternative ways to explain the sudden appearance of empowerment at the world agenda. Due to the lack of a uniform definition of the concept and the absence of common approaches in the stimulation of empowerment it's difficult to argue that the situation is marked by consensus.

Among those who graduate from the various schools of Social work in Sweden are a great majority women. At the same time men are sought after in the work field.  But not just to level up the equality between the sexes, but also to fill a gender specific niche to counter up a need for male role models. But a closer look at this need and the types of functions set to cater for it shows that male role models as a concept vary between contexts. In this study we examine the concepts and the practices of male role models in three different settings: a municipal social care center offering young boys male bonding activities; a non-profit organization warding young people from drug abuse and criminal behavior; and last, a long term residential home for young boys between the ages 13 and 19. Our research shows that the concept of the male role model vary between the organizations and less so within.

The development of higher education in Sweden poses new demands on higher education libraries. One way of meeting these demands has been to develop Learning Resource Centres (LRC), a concept that is relatively new in Sweden.The aim of this Master's thesis is to identify how the LRC-concept has been designed and integrated in three Swedish higher education institutions: Stockholms universitet, Lärarhögskolan i Stockholm and Göteborgs universitet. The thesis also aims at investigating what the Learning Resource Centres mean to the seats of learning, and in turn, the views of concerned parties in relation to the integration.The method used for the study is qualitative and based on interviews conducted with Learning Resource Centre staff, academic staff and principles or deans. In addition to this, strategic documents from the examined seats of learning are studied.Even though most Swedish Learning Resource Centres have used British Sheffield Hallam University's Adsetts Centre as their model, our study shows that the Swedish Learning Resource Centres of today have developed in various ways, due to local conditions; therefore, there is no definitive model for Swedish LRCs.In our opinion, one of the most important characteristics of a LRC should be its integration in the academic life of its university. There does not seem to be a "recipe" of how to conduct this integration.

Purpose: The purpose with this paper is to get a deeper understanding for prizes and awards as a marketing tool and phenomena. Further we want companies/organizations that use this should be able to make better decisions concerning marketing towards students. Maybe they will get better results on the basis of our investigations. Method: We used the qualitative method when we did the interview that was also non-standardized. The survey was quantitative, and the case study comprises both qualitative and quantitative method. Conclusion: Companies/organizations that arrange this type of competitions have to look over their marketing of the competition.

This study is based on interviews with heads of unit, care staff and senior representatives from a total of six people. We have in this study directed our focus on care quality in the elderly as a concept in development. It appears, when the elderly do not have any dependents, it is even more important that staff supports some extra where no relatives are involved.Quality of life is the broader concept of good quality care and where a good quality of care is a necessary condition for a good quality of life. According to the social services care is the target that older people will live a good life and be allowed to live in a safe environment, which we intend to investigate in this study. Opportunity for greater influence should now be given to older people and their families on how interventions should be designed and implemented.

This critical examination of the concept of cultural heritage is based on an overall phenomenological approach, with focus on Alfred Schütz?s further development of Edmund Husserl?s idea of the lifeworld. With strong emphasis on the subjective and intersubjective dimensions, the concept of cultural heritage is contextualized, analysed and criticized from different aspects for the purpose of enriching the discourse of cultural heritage.A literature based methodology is used, including a hermeneutic analysis of theoretical texts in the field of cultural heritage studies and the new Swedish Culture Environmental Law (?Kulturmiljölagen?) and related bills. Qualitative interviews deal with people?s notions about the concepts of culture, cultural heritage and intangible cultural heritage.

This paper deals primarily with the developmental potential and use of court -based mediation in Swedish law, and its relation to court-based conciliation and the judicial procedure as means to end a conflict.  In Chapter 42, Section 17 of the Swedish Code of Judicial Procedure, a judge, before the parties have their main hearing, can act as a mediator between the parties to settle the dispute. The judge should, according to the law, always try to make the parties come to an agreement before the main hearing. This obligation can be fulfilled either through the use of court-based conciliation, or court based mediation. Mediation as such is rarely used in Sweden, and one of the goals of this essay is to try to provide a tentative answer to why that might be the case.  The second goal is to try to find a consistent, yet flexible notion, of the concept of ?jurisdiction?, and to provide an explanation for the relation between mediation as an alternative method for dispute resolution and the judicial procedure.                                                                                                                                            .

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This is an investigation of a mobile prefabrication factory´s competitiveness and profitability which also will result in a suggestion for a design of the factory. The mobile prefabrication factory is an idea of a new concept for production which is meant to be used in the manufacture of slab. The main intention with this concept is that by using a fast established prefabrication factory to produce elements near the construction site, thus avoiding transport from the factory to the building site. This means not only an environmental and economic gain, but also that you can avoid risking damage the elements which often occur during transportation. The contractor is owner of the mobile prefabrication factory and can thus avoid long waiting times and cyclicality.