In this thesis, two real-time stereo methods have been implemented and evaluated. The first one is based on blockmatching and the second one is based on local phase. The goal was to be able to run the algorithms at real-time and examine which one is best. The blockmatching method performed better than the phase based method, both in speed and accuracy. SIMD operations (Single Instruction Multiple Data) have been used in the processor giving a speed boost by a factor of two..

Gliding and sealing functions in Öhlins shock absorbing systems sets great demands onthe contacting surfaces. In this particular case, the bushings and the sealings on acylinder piston. The surface wanted is a surface with both low frictional forces and smallleakage. This study was done with the goals of investigating and determining existingsurfaces due to the frictional force and leakage. How can we in an easy mannerdescribe these?A number of ten front forks were part of a main study.

Arlanda airport is Sweden?s largest airport. The demand for comfort cooling of the airport?s buildings is high and is mainly provided by district cooling. District cooling is based on the same principle as district heating.

Modern forest owners are very familiar with forest management and forest economics. Therefore they have high demands for quality in forest operations. Guarantee of quality in the shape of self-checking activities is an important tool to guarantee a well managed forestry operation. To meet the forest owners? demands on guarantee of quality and the entrepreneurs wish of an easy method for self-checking, the forest owners association, Södra skogsägarna, has developed a new method for thinning inventory. The purpose of this study is to evaluate the method that is used for self-checking and to find ways to develop and improve of the method. The data has been collected by inventory in a number of stands with circle-area survey and with strip survey, which is method that is used for self-checking. The results show that the strip survey does not diverge more than ±10 % in measuring values of basal area, number of stems, roads share, thinning quotient, outtake of basal area and total volume compared to circle-area survey.

Value stream mapping is a tool that is frequently used by many different companies. It is a great tool used to achieve the work that follows the theories of lean production. The tool is used, however, only frequent on the factory floor and the method is also designed based on this type of use.An interest of applying the method on administrative parts of the company has occurred lately. Administrative parts of the company refers to the part that does all the planning such as purchasing, receiving orders, customer contact, contact with factory floor and other work that is made around the actual manufacturing. But the knowledge about applying value stream mapping on the planning part of the company is lacking because the method is relatively new.In this work, a comparison is made between the introduction of value stream analysis on production and planning.

This report is about helping Q-Med AB in Uppsala to start its implementation of uncertainty of measurements analyses in their manufacturing department. Prior to this, the company relied solely on personal experience or did not take this uncertainty into consideration at all during different kind of measurements, which means that some of the processes that the company previously believed were within specified acceptance limits, will actually fail when considering these sources of uncertainties.Q-Med AB needed some sort of instruction to help the company, in a systematic way, to investigate different types of disorders that are affecting all kinds of measurements. This instruction includes a short summary about measurements and uncertainty of measurements in general and a detailed procedure about how these uncertainties are going to be handled in their daily work.The goal was to be able to use this instruction to systematically locate, eliminate (when possible) and analyze all kinds of disorders when measuring. Q-Med is using a lot of different types of instruments when measuring different types of quantities, including temperature, mass, pressure and density. This instruction will hereafter be used for every instrument, regardless of quantity and type of instrument.The instruction is tested through 4 different kinds of measurements, for mass, temperature and humidity.

Texture is an important soil property and accurate particle size analysis of soil texture is therefore crucial. There are a number of well-established and newly developed methods available for determining soil texture. In order to compare the results of these methods, the differences between them must be determined. The difficulties, problems and differences regarding texture class determination were examined through a study performed on forest soil samples. The study compared different methods (pipette, hydrometer and field methods) and two types of dispersing agents (sodium pyrophosphate and sodium hexametaphosphate (calgon)) commonly used for particle size analysis.

The purpose of this study was to evaluate the different substrates that enter the digestion on Sundet wastewater treatment plant for production of biogas.This work have done an analysis of data about the biogasproduction from January 2012 to feburari 2013, this showed that the food substrates has a greater gas production than internal sludge.Through laboratory test the VS, TS and COD values for all the substrates used in the biogas production could be determinded. But the COD-method was less optimal for analysis of fat and food, therefore it optimized the method for fat but due to time constraints, this could not be done on the food substrates..

Value stream mapping is a tool that is frequently used by many different companies. It is a great tool used to achieve the work that follows the theories of lean production. The tool is used, however, only frequent on the factory floor and the method is also designed based on this type of use.An interest of applying the method on administrative parts of the company has occurred lately. Administrative parts of the company refers to the part that does all the planning such as purchasing, receiving orders, customer contact, contact with factory floor and other work that is made around the actual manufacturing. But the knowledge about applying value stream mapping on the planning part of the company is lacking because the method is relatively new.In this work, a comparison is made between the introduction of value stream analysis on production and planning.

The aim of this thesis is to study Viking Eggeling?s artwork Diagonal Symphony together with Eggeling?s own art theoretical writings. This method of reading Eggeling?s art theoretical writings with the aim to try and create a deeper understanding of his art and especially Diagonal Symphony is a new approach in Eggeling?s art historical discourse. The thesis starts with a description of how the field of art history has understood Eggeling and his art primarily through art historical research aimed at Hans Richter.

This study analyzes the court of appeals work on judging immediate care (6 § LVU) by the child´s best from 10 court cases. This study has been reviewing 10 court cases and reviewing the court of appeals applicable laws in their decisions on interlocutory order within LVU. The material than have been analyzed consists of immediate care of children, and the concept of the best interests derived from the UN Convention on the Rights of the Child.The legal sanctions includes when a state signs a convention, which Sweden has. This means that Sweden is at their disposal to offer all children within its territorial limits, up to 18 years may take part of the rights set down in the Convention of the Rights of the Child. This means that all decisions relating to the individual child, should always be taken with respect to the best interest of the child, when a child for varoius reasons end up in a lawsiut.The concept of the best interest of the child are vague and abstract because it is not clearly defined.

This study centres on learning to read and methods for teaching reading skills. The aim is to provide a survey of the concept reading skills and the methods developed on the basis of different theories and the methods preferred when teaching children in primary school and why. The study is based on interviews with eight teachers who are working on a dailybasis teaching Swedish in preschool class or lower primary school. The result of my study is that the majority of teachers do not use a specific method, but rather combine several different methods, thus adapting instruction to each individual pupil. .

Building on the concept of constructive iconoclasm as a creational force of iconicity, this thesis examines how the contemporary iconoclastic discourse is related to artistic process. Studies have shown that the performative act of destroying art that is an historical phenomenon is highly present within the contemporary art discourse today. Due to the many dimensions of contemporary art, the ways in which iconoclastic deeds appear may differ from the historical narrative. While iconoclasm and iconicity are being reciprocal processes that can only exist in relation to each other and their context, there are signs that the destructive act itself is being recontextualized by contemporary artists. Guided by the framework of Norman Fairclough?s critical discourse analysis, the thesis examines the processes of conceptual and constructive art destruction by analyzing the discourses of two case studies situated in the contemporary art market.

The object of this examination project is to produce a method of work sampling at Rapid Granulator AB. The aim is to perform the method at the company and evaluate if it is executable. The study is delimited to the basic construction of the 45-series in the assembly hall.Preparations to produce the method of the work sampling resulted in definitions of activities, a form and a product tree. Several days were spent studying the assembling to learn and understand the entirety.The work sampling result showed a large amount of no value adding time that was used in the assembling. Some of the activities could be reduced and we observed some problems during the assembly process.

This essay will focus on video and computer game violence. We hope to uncover, with the help of semiotics, according to Barthes design, if this kind of violence can have a negative effect on youth and adolescents. How intense is the violence and how graphic is it?. PEGI is the European measurement for game age limits.