Abstract In high voltage substations there is an increasing demand for computerized equipment, and automation of operation and supervision. The future primary equipment will provide the possibility to collect more information and to provide better control for improved effectiveness. Since ABB has got a large customer target, each product must be custom made to fulfil the customers (often from different countries) demands. Later these products will be configured by engineers who may not be familiar with the tools used at ABB. This is a very expensive and time consuming.

What is the?self? and to become ?one-self?? To resolve this questions possibility I´ve been using the philosopher Søren Kierkegaard metaphysic paradoxes. This essay about the ?self? shows the reader the difference between describing a transcendent and immanent phenomenon and if it´s possible to become or to not become ourselves. The process is a key of the ?self? which Kierkegaard explains the ?self? in and for it-self.

The project has sprung out of my imagination. I wanted to find out what happened to my creativity, and my way of making product design if I used the method of putting myself into a fictive world. The project has taught me to rely on myself and my knowledge as a designer.I have made a chair which closes out sounds and gestures in public places. A chair which provides you with peace and quiet in a busy environment..

Preservation of cells and tissues by freezing at temperatures below 70°C has led to new possibilities for the storage of germ cells for fertility preservation. During the freezing process problems might occur, the greatest being ice crystallization which can cause membrane destruction and thus cell death. To minimize this risk, solutions that reduce the freezing point can be added to reduce crystallization and increase survival rates. These solutions are called cryoprotectants. The best method for freezing is still not known.The aim of this study was to analyze the effect of various parameters on the survival rate of human semen frozen with liquid nitrogen.

The goal of this thesis is to analyse whether the method ?Observiaire? is of any use for traffic analysis. The method consists of analysing film material, preferably before and after changes are made to an area, by answering a survey for the users that are observed within the population. The method also opens up for deeper qualitative analyses which are rooted in the quantitative data collected from the survey-study. In this study we analyse the method by applying it to the case study of the changes made at Götgatan in Stockholm, where a green wave was implemented and the bicycle road widened.

Very often the interesting variables are explained by several underlying variables and in statistical analyses it is common to study the relationship between variables and groups of variables. Because of this multivariate analysis is commonly used in both science and industry. There are two problem with both univariate and multivariate analyses. One is when the variables are correlated. The other is when the number variables of exceeds the number of observations which makes the matrices algebra used in the analysis impossible to execute.

In order to be able to change, to maintain competitiveness as a company in a world where rapid changes is part of the daily life, it is crucial to have knowledge and methods in how to change. One method, originally developed in Finland, is the Change Laboratory. This method is said to be efficient, not only concerning change aspects but also learning, since change and learning in this method is intertwined. This Master Thesis (20p.) tells about the process of conducting a Change Laboratory with a Swedish high-tech company and analyses factors in the process that makes change possible..

AbstractMI stands for Motivational Interviewing, the Swedish translation of MI is Motiverande Samtal. Adolescence is a period in life when challenges are encountered and pivotal choices are being made. It is during this period adolescents form their lifestyle, which have an impact for their health for the rest of their life. MI has shown to be an effective and appropriate method for school nurses within school health care, to utilize in approaching by adolescents with risk behavior. This is because it gives adolescence to take responsibility and empowers them to make decisions regarding lifestyle-changes.

AbstractMI stands for Motivational Interviewing, the Swedish translation of MI is Motiverande Samtal. Adolescence is a period in life when challenges are encountered and pivotal choices are being made. It is during this period adolescents form their lifestyle, which have an impact for their health for the rest of their life. MI has shown to be an effective and appropriate method for school nurses within school health care, to utilize in approaching by adolescents with risk behavior. This is because it gives adolescence to take responsibility and empowers them to make decisions regarding lifestyle-changes.

In this work, a method was developed and evaluated for calculating the life of welds under the influence of fatigue loads from a vibration environment. Typically, a shaker table is used for testing a component against vibration loads. The shaker table creates a vibration environment that is defined in the frequency domain by a power spectrum.Similarly, a virtual vibration table can be used to calculate the same type of load environment, which can then be used to calculate the expected lifetime. The benefit of this method is that it can be used in design, as well as in simulation of tests before physical verification tests are carried out.Today there are methods for calculating fatigue life of non-welded base material, but since many components contain welded joints, there is a need to apply this method to those types as well. To achieve this, the thesis combines two different areas, which together provide a method for fatigue assessment of welds using a virtual shaker table.The methodology is carried out by modeling the component, and its welded joints, in a finite element program.

Syftet med denna studie var att beskriva vilka faktorer som kan påverka sjuksköterskans möjligheter att handleda sjuksköterskestudenter under deras verksamhetsförlagda utbildning. Sjuksköterskan handleder studenter dagligen i klinisk praktik. Sjuksköterskan ska kunna hantera sitt arbete och samtidigt vara handledare för studenter. Studien är en litteraturstudie med en beskrivande design i vilken fjorton artiklar granskats. Resultatet visade att i tio av de fjorton artiklarna togs negativt påverkande faktorer upp såsom hög arbetsbelastning och otillräcklig avsatt tid för lärande och återkoppling med studenten i den kliniska miljön.

Induction motors, often referred to as the workhorse of the industry, play an important role in production today. Therefore, it's important to diagnose any faulty induction motor prior to failure to avoid costly and time consuming production stops.This thesis compares methods for diagnosing induction motors in operation, MCSA, Park's vector approach and the standard method used by Swedish industries today. By simulating broken rotor bars and short-circuit in one of the windings, each method is tested and the results are compared using matlab.The results need further verification due to uncertainties of the condition of the test motor, even though the experiment gives a hint of the different advantages of each method. A combination of the methods should be able to tell if the motor needs further examination..

In each classroom there is a teacher with good intentions wanting what´s best for their pupils. But grades and tests in mathematics from 2009 in Sweden shows there is a crack between the subject being taught and the learning child. The purpose with this research is to find an understanding from a teaching and learning perspective of which teaching method is more suitable for teaching and learning mathematics by doing a comparison between two methods. The main question is:What are the advantages and disadvantages of the traditional and the laboratory method of teaching, supported by the two keywords teaching method and learning?This C-paper is based on a qualitative research aiming to gather an in-depth understanding of human behavior.

In this master thesis work, a new method called MultiScat, is compared with the conventional method with alfa-correction, for computing concentrations from intensities in X-ray spectrometric analysis. The conventional model is a linear model, which only takes the photoelectric effect into consideration. It doesn't consider Rayleigh and Compton scattering even though it has a great impact on the measured intensities. Here MultiScat differs a lot. MultiScat is based on a solution of the Boltzmann transport equation.

Syftet med studien var att undersöka hur nyutbildade intensivvårdssjuksköterskor upplevde introduktionen på intensivvårdsavdelningen (IVA). Data samlades in genom semistrukturerade intervjuer av tio nyutbildade intensivvårdssjuksköterskor. Data analyserades med kvalitativ innehållsanalys. I huvudresultatet framkom två teman. Första temat ?Yttre faktorer som påverkar upplevelsen av introduktionen både positivt och negativt? innehöll kategorierna bemötande, checklista/introduktionsprogram, handledning, mentorskap, psykosociala miljön och organisatoriska faktorer.