This literature review summarizes available data on infection with the parasitic roundworm, Ascaridia galli, as a cause of disease in poultry, including the consequences of a conversion to alternative production systems. Ascaridia galli has a direct life cycle with resistant eggs that survive and are easily spread in the environment, especially in systems with bedding materials where the faecal contact is high. The infection is usually subclinical but depending on the infection dose, the symptoms range from weight loss and diarrhea to mortality. Factors such as the feed composition and genetic variation among different hybrids clearly affect the establishment rate of the infection. Ascaridia galli will probably become an increasing problem, with a shift from the traditional battery cages to alternative systems where the risk of re-infection is high.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

There are several typical ideas about the suburb. The suburb is often associated with criminality and other social problems such as segregation. The purpose of this essay is to study the picture of how the suburb is constructed in a media context. The method used to answer the purpose of this study is critical discourse analysis, based on the thoughts of Norman Fairclough. The central theoretical ideas for this study are representation, stereotypes and racialization.

Water is the most essential resource for life. In cases where drinking water is processed from surface water it is important to ensure the raw water is of good quality, and is suitable for processing through the water treatment plant.The drinking water for Västerås is sourced from Västeråsfjärden, in the western side of Lake Mälaren. The city itself is home to marinas, ports, a wastewater treatment plant, the Svartån outlet, sewage pumping stations and stormwater outlets. Because of the negative effects these activities have on surface water quality, Mälarenergi AB is interested in relocating the raw water intake point to Granfjärden, 10 km east of Västeråsfjärden. At Granfjärden the intake point would be less exposed to the activities in Västerås, and could be placed at a greater depth, resulting in better water quality.In this Master?s thesis the water quality and the pollution risks at Västeråsfjärden and Granfjärden sites are compared.

The jetengines of today are growing in complexity. Reliability for aircraft engines are of extreme importance, mainly due to safety reasons but also economical ones. This master thesis deals with faultdiagnosis in the turbine section of RM12, the engine used in Saab/BAe's Gripen. Three different faults which can occur in the turbine section was studied. These faults are: clogged fuel nozzle, hole in outlet guide vane and sensor fault.

The increasing oil prices during the last years have made it profitable to use cereal grains as a fuel. When compared with wood, cereals contain higher amounts of Cl, S and ash. The Cl and S content makes the gases from cereal combustion more corrosive than gases from wood combustion. The goal of this master thesis was to find out the variation of Cl, S and ash content for oat grain grown under different conditions. Oats was chosen because in Sweden it's considered as the cereal with the best fuel qualities.

When searching for better and more practical interfaces between users and their computers, additional or alternative modes of communication between the two parties would be of great use. This thesis handles the possibilities of using eye and head movements as well as voice input as these alternative modes of communication. One part of this project is devoted to find possible interaction techniques when navigating in a computer interface with movements of the eye or the head. The result of this part is four different controls of an interface, adapted to suit this kind of navigation, combined together in a demo application. Another part of the project is devoted to the development of an application, with voice control as primary input method.

This essay will focus on the people using and are involved in, and have a large interest in the horror film genre. The purpose of this essay is to find what urge these people to continuously watch horror movies and how they believe to be acknowledge by the society in a modern sense. Our study is mainly based on two separate interviews and therefore, mainly from the users perspective. This essay is also complemented by earlier research on this topic. In context of stigma, violence debate, exclusion we found that the users truly can be found in a rare type of alternative sphere, besides the public sphere.

The worldwide industrial demand of energy, often in form of fossil fuel, is continuously growing and at the same time these resources are coming to an end (Hamamre, 2013). The interest and focus in renewable sources are then more important than ever and plants are suggested to be a good alternative for production of raw material for industrial purposes (Nilsson et al., 1998). But the world is also facing an increasing world population which also increase the nutritional needs, plants therefore need to be suitable for both industrial and nutritional purposes. To achieve this, common plants need to be improved but it also need new potential crops to be developed and introduced (Carlsson et al., 2009). Modern technology like gene engineering is an important tool to achieve these challenges (Carlsson et al., 2011). This work focused on analyzes and evaluation of different transgenic lines of field pepperweed (Lepidium campestre L.).

This paper describes the Swedish reconnaissance squads in the engineer battalions, their equipment, tasks and organization. An analysis is made to compare the present weapons and fire power of the reconnaissance squad with an extended weapon alternative. The analysis focuses on the abilities effect, protection and movement in different situations typical of a reconnaissance squad.The facts that are presented in this paper are mostly founded on the new field manual FältarbR Dyktjänst 2007, which regulates much of the reconnaissance activities. The aim of this paper is the making of a contribution in the developing progress of the new field manual and the reconnaissance squads in Swedish engineer battalions.The result of the analysis shows that the extended weapon alternative would be an asset..

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

AbstractElectricity consumption is a globally increasing problem caused by the high share of electricity produced in coal power plants. These contribute to high carbon emissions when only about 1/3 of the heat generate electricity and the remaining 2/3 of the heat cools off. Combined heat and power plants (CHP) have high efficiency because they use the residual heat for domestic heating. The CHP plant often use fuels from renewable resources, giving them a lower carbon footprint, but are also depending on the heat demand. If electric powered products such as drying cabinets convert to heat powered products more environmentally friendly electricity will be produced by CHP plants, which can supplant electricity, produced from coal power plants and reduce carbon emissions.

Uppsala County has ambitious environmental aims for the planned residential area inÖstra Sala backe. In this thesis different energy sources have been evaluated todetermine which system that would be most favorable given currently availableinformation about the project. Planned energy usage has been divided into tap waterheating, space heating and power. Three base case scenarios were made with districtheating, small scale bio fuel and heat pump. Solar power and solar heating were thensimulated and the production from the two could individually be deducted from theenergy need in the base cases, constituting 9 different scenarios.

The purpose of the study was to examine if parents' way ofcommunicating with their children changed after participation in ComAlongcommunicationcourse, and if changes remained over time. The studyinvolved 39 parents of 25 children with communicative disabilities. 33 of theparents had participated in ComAlong, the other six had not participated, buthad a partner who had participated in the course. Video recorded parentchildinteraction was analyzed and coded with the instrumentKOMMUNIKATIV. Results showed that parents used a significantly moreresponsive communication style and used significantly more augmentativeand alternative communication after ComAlong.

The purpose of this thesis is to identify and define Key Perfomance Indicators (KPIs) and value adding services which are used to describe the quality of Forias logistics services from different aspects. The KPIs should be attractive to both Foria and their customers, with the aim to strengthen the interaction between both parties.The basis for this work is a research in which a literature review and a survey of the market for Swedish logistic service providers were carried out. An analysis of the present situation of Foria was carried out, where a number of people in the company were interviewed. These elements were used together with definitions of KPIs to perform the analysis of the work.The result of the work is ten KPIs that have been created and developed for Foria and which are considered to be attractive to both Foria and the selected customers. The KPIs are: · ECO-driving (binary) ? the company has ECO-driving-educated drivers· ECO-driving (comparison figure) ? all drivers individual driving and its resulting exhaust emissions are compared· The environmental impact ? a total of exhaust emissions from all vehicles belonging to a single business, measured in tonne-kilometres· Complete order ? portion of fields with accurate information (in an order), with the possibility of error categorization· Delivery reliability ? time difference between expected and actual delivery, average for all orders· On-time ? the number of days and hours of difference between the expected and the actual time, for all activities of the order· On-time (activity) ? the number of hours and minutes of difference between the expected and the actual time, for each individual activity of the order· Divergence ? a categorization of all causes of divergence and its responsible department· Level of integration ? the level of cooperation between the logistic service provider and the customer· Customer satisfaction ? how well an order will meet the expectations of the customer The KPIs are described in detail with definitions, how they can be used and what is required to implement them in the service process of Foria.