Lotsbroverket is the largest wastewater treatment plant on the Aland Islands and it isdesigned for handling wastewater from approximately 30 000 persons. In 2011,Lotsbroverket produced about 2800 m3 of dewatered sludge. The sewage sludge that isproduced is transported to a contractor where it is processed to eventually be used e.g.in the construction of green space. This study aims to investigate available applicationoptions in terms of the sewage sludge that is produced in Lotsbroverket. The main aimis to study the feasibility of using the produced sewage sludge as a fertilizer in theagriculture of the Aland Islands.The sludge already fulfills limit values for heavy Metals in accordance with the Act"The Aland Government´s directive on the use of sewage sludge in agriculture." Inorder to clarify the sludge content of pharmaceutical and organic substances it isrequired that the substances are identified and a risk assessment is performed.

Soils in a metal contaminated site on Stångberget in Gusum in southeastSweden were investigated and compared to relatively unaffected soils a fewkilometres away. Pollution came from historical release of untreated flue gasesfrom a brass mill. The objective was to find information on how high the metalconcentrations are, if Metals from the polluted soil affect the surroundings andif the metal contamination affects the microbial community. The soil wasinvestigated using several different methods, such as field XRF measurements,chemical analysis of metal, carbon and nitrogen content, pH, acid neutralizingcapacity, texture, soil depth, field leach tests, sequential extraction and microbialfunctional profiles. The study showed that copper and zinc concentrationswere above Swedish Environmental Protection Agency guidelines for lesssensitive land use on the entire investigated area.

Emissions of insufficiently treated wastewater, mainly blackwater (i.e. wastewater from toilets), contributes to the eutrophication of lakes and seas. At the same time, blackwater is a fraction with a low content of heavy Metals and, after sanitization, it can recirculate plant nutrients to arable land using the liquid composting treatment method. Liquid composting means that organic material is degraded under aerobic conditions. For sanitization, the blackwater needs to be treated together with energy-rich complementary material.

This thesis was conducted at Mälardalen University in Västerås and Härjeåns Nät AB, mainly in Sveg. Härjeåns Nät AB is a network company that delivers electricity in Härjedalen municipality, Ånge Municipality, Ragunda and Bräcke municipality. The maintenance and dismantling of electricity and broadband networks generates a lot of waste. The purpose of this work is to present proposals on the management of the waste. The goal is that all of Härjeåns offices should have equal management for the waste and an overview of how to manage the various wastes.

Miljöproblem kan ses som ett växande problem. Studien visar hur stor kunskapen är hos gemene man angående särskilda miljöproblem och dess risker. I denna studie tas problemet upp angående miljö- och hälsofarliga metaller som ansamlas i slammet hos svenska reningsverk. Metallerna kan ge allvarliga hälsoeffekter på människan och förekommer i en rad kända vardagliga produkter. Studien grundar sig i en enkätstudie med 200 deltagande respondenter och syftet är att mäta deras kunskapsläge.

AbstractAt Saltvikens copperindustry, which is located in the municipality of Oskarshamn, copper was refined from sulphiteore some hundred years ago. The ore underwent several steps in the process before the final product was received. These steps all had an influence on the environment through discharge of heavy Metals. The area where the copper industry was located is today considered to be of specific national interest due to its valuable nature and cultural values, as well as its value for recreational outdoor activities. Therefore, it is important to determine the present level of contamination and if any transport of contaminants have occurred, and to identify the risks that are associated with the site both at present and in a longer time perspective.Thirtynine soil samples and 16 sediment samples have been analyzed.

A research of 14 toxic affected study sites in Sweden showed a significant increased proportion of deformed diatoms. The six metal polluted study sites in the region of Dalarna showed a 4, 2% average of deformed Fragilaria (deformed diatoms reference sites, 0, 1%). The results also indicate a significant increased proportions of deformed diatoms in the eight pesticide polluted sites in the south and middle of Sweden, compared to the reference sites, howsoever the toxic content was low. The results indicate that there are no lager differences in neither teratological forms nor variations that segregate metal polluted and pesticide polluted shells. One of the reasons may be that both heavy Metals and pesticides can affect the development of the diatom shell..

The following study aims to investigate the environmental conditions of the harbor of Sk?rhamn, a small fishing community on the west coast of Sweden. The interest to do so rose as a newly built apartment residence failed to connect the sewage pipes of 18 apartments, causing the untreated sewage running into the sea. The parameters accounted for are the C/N ratio, total organic carbon (TOC) as well as total nitrogen present (TN) and ?13C in the top ten centimeters of a sediment core retrieved in the Sk?rhamn harbour.

Every year about 210 000 tones dry weight of sewage sludge is produced in Sweden. Most of the sludge is applied to agricultural land, plantsoil and landfill cover. Sewage sludge contains essential nutrients such as nitrogen and phosphorus. Nitrogen is limiting growth on solid ground in Sweden and can therefore be used as fertilizer to increase productivity. In order that the sludge can be spread to forest land it requires first a conversion of sludge to pellets, to make it more manageable.

At the time being there is limited experience within turbine decommissioning in Sweden and the economic effects are unknown. Despite this, there are expectations that revenues generated by sales of materials will cover decommissioning costs. The model developed identifies thirteen parameters that vary between different types of turbines and that affect the economic consequences of decommissioning. The three most important parameters are turbine location, tower material, and the scope of decommissioning. Trends in the wind energy industry show that these three factors are developing in a manner that increases decommissioning costs dramatically.

This thesis raises the problem with acid mine drainage around the closed mine Finngruvan.The purpose of the investigation was to compare metal content in surface water in the areaand its catchments between year 2010 and 2003, also to make calculation of specific runoffand metal load, furthermore determine the recipients in the area. Surface water samplingwhere preformed at the same place as 2003 and also at a few other places of interest. Adigital elevation file were used in GIS to calculate the area of the watersheds in the region,observations in the field where also made. The collected data were used to make comparisons,calculations and conclusions. The result showed that the surface water 2010 had somewhatlower metal concentrations.

The aim of my thesis is to obtain knowledge of textile wastewater and textile sludge from an environmental perspective, which can be used as a basis for the  ?Sweden Textile Water Initiative? guidelines for a sustainable sludge management. In my study I have mainly focused on textile dyes, salts and Metals and their routes during wastewater treatment.This paper is partly a literature review, which I began by identifying the pollutants discharged from each textile process. Then I studied wastewater and sludge quality, environmental aspects, possible treatment and recycling methods. I have also tried to find existing type of guidelines in order to make comparisons.

Increasing attention is being given to acid sulphate soils wherever they occur. The problems that leaching sulphate soils gives with significant lowerings of pH and mobilization of heavy Metals influence large spectra of our society from fisheries to agriculture to construction. Mapping these soils is consequently of great importance and the methods of doing this is very much lacking in function and precision. This study was therefore carried out to investigate whether conductivity in running water can be used as a simple instrument to identify acid sulphate soils in the catchment. 31 coastal streams in the county of Västerbotten were analyzed for different catchment properties such as occurence of marine sediments and basic water chemistry including conductivity and sulphate.

The purpose of this study was to investigate how elevated levels of heavy Metals affect the faunal species composition, abundance and species-diversity. The bentic macroinvertebrate fauna in the highly polluted lake Tisken was compared with the bentic macroinvertebrate fauna in the unpolluted lake Varpan. Mine wastes account for most of the metal that is discharged into Tisken. The hypotheses was that the heavy metal pollutions in lake Tisken influenced the species composition, abundance and diversity of the macroinvertebrates. Twenty samples were taken in both sites.

The aim with this study was to investigate the effects a change of manufacturing process would have on the mechanical properties of drill bits made of a WC/Co composite used for stone cutting. The method used today is sintering, where the material is heated in a conventional sintering oven. The other method was microwave sintering, where the material is heated by radiation in the microwave region. Also an investigation of the manufacturing cost were made.The main difference between the two heating methods is that the conventional way is a rather slow process and the microwave method is very fast. The material is also heated homogeniously in the method with mirowaves, aposed to the case with the conventional sintering where the material is heated from the outside in.This makes the material harder and more wear resistent.