The filters used today to purify water are often expensive and the need to find new filter materials is substantial. Studies of pine bark have shown that this is a material that may be used as an alternative to conventional filter materials, such as activated carbon. However, the study of pine bark has shown that a leakage of phenolic compounds may occur when using the material for water purification. Therefore, the purpose of this report is to investigate the release of phenols from pine bark, in order to evaluate the use of pine bark as a filter material. Another assignment is to investigate the amount of metals adsorbed by the filter material.

The purpose of this study was to investigate how elevated levels of heavy metals affect the faunal species composition, abundance and species-diversity. The bentic macroinvertebrate fauna in the highly polluted lake Tisken was compared with the bentic macroinvertebrate fauna in the unpolluted lake Varpan. Mine wastes account for most of the metal that is discharged into Tisken. The hypotheses was that the heavy metal pollutions in lake Tisken influenced the species composition, abundance and diversity of the macroinvertebrates. Twenty samples were taken in both sites.

Using biofuels from regeneration cuttings is becoming more common in Sweden. Ash from the combustion of biofuels contains many valuable nutrients and base cations. The Swedish Forest Agency recommends that ash should be recycled to clearings where biofuels have been removed, to avoid future impoverishment of Swedish woodlands. In Jämtland, in northern Sweden, a large quantity of biofuels are taken out from cuttings but ash recycling has not yet been tried. The aim of this thesis was to examine the conditions for ash recycling in Jämtland regarding to soil chemistry and heavy metal content in soil and biofuels.

Uppsatsen granskar det spänningsförhållande som existerar mellan Hårdrockens uttryck och den oinvigda allmänhetens moralpanik. Genom självpresentation och smakdistinktioner undersöker den också hur Hårdrocken idag har positionerat sig som en etablerad kultur med ursprung och tradition. På så sätt behandlar uppsatsen vad och vem som definierar Hårdrockens kulturella värde och position. Undersökningen görs genom en textanalys av den svenska hårdrockstidningen Close-Up Magazine. Uppsatsen granskar även hur tidningen positionerar och presenterar sig som betydande aktör inom Hårdrockens verksamhetsfält..

Increased understanding of the mechanisms that operate in conjunction with the welding of metal surfaces may help to improve existing manufacturing processes, and to enable new products and combinations of materials. The purpose of the project has therefore been to acquire a deeper understanding of what is happening in the bond for steel and for the factors that form the basis for a bond to develop between metals in the production of laminates by pressing. The merge has been done by pressing and the surfaces after the experiments have been studied in detail in the scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX) and with interferenceprofilometry in Wyko, to provide a greater understanding of the mechanisms that influence the bonding in the interface between metals. The project was limited to contain the materials Docol 1000, HyTens 1200, Aluminum AA3003 and a commercial steel. The parameters varied in the experiments to study their influence closer are temperature, pressure, heat treatment and pretreatment. This has been implemented by pressing with varying temperature and pressure.

When cylinders for motor saws are manufactured there are high demands on the cylinders strength and wearing qualities. Aluminum is a material with low density and is used by Husqvarna AB for their motor saw cylinders. The aluminum is strengthening with nickel that is attached to the cylinders through electrolysis. When aluminum is in contact with oxygen a film of oxide is formed. To eliminate the oxide and to prevent formation of new oxide zinc is used.

The purpose of this thesis is to examinethe possibilities for adding a floor to anexisting building using the two materialswood and sheet metal profiles as the loadbearing structure. An apartment buildingfrom the 60s has been used as referencehouse. Two different suggestions for thedesign are presented in the rapport. Oneof them has been analyzed with wood andsheet metal as the load bearing structure.Using the old constructional calculationsand blueprints of the existing buildings,the load bearing capacity has beencalculated. In the calculation programFEM-Design the building has been testedwith the loads that an extra floor wouldgive.

Den här undersökningen fokuserar på hur skivomslagen ser ut inom hiphop och glam metal i Sverige i en jämförelse över tid. Undersökningen ska även besvara de förändringar eller icke- förändringar som skett, samt hur kulturen påverkar utformandet av skivomslag inom varje musikgenre. Syftet är att får en ökad förståelse och inblick i kopplingen mellan musikgenre och bild i utformandet av skivomslag. Med hjälp av den semiotiska bildanalysen har skivomslagen analyserats under två olika tidsperioder. Resultaten av analyserna visar att båda musikgenrerna har gått över till mer tolkningsbara skivomslag.

Den här undersökningen fokuserar på hur skivomslagen ser ut inom hiphop och glam metal i Sverige i en jämförelse över tid. Undersökningen ska även besvara de förändringar eller icke- förändringar som skett, samt hur kulturen påverkar utformandet av skivomslag inom varje musikgenre. Syftet är att får en ökad förståelse och inblick i kopplingen mellan musikgenre och bild i utformandet av skivomslag. Med hjälp av den semiotiska bildanalysen har skivomslagen analyserats under två olika tidsperioder. Resultaten av analyserna visar att båda musikgenrerna har gått över till mer tolkningsbara skivomslag.

The industrialization in Sweden has increased the large number of areas that have been contaminated with various types of pollution. One of those sites are the property Höjen 3:24 in Arboga where ?Arboga Mekaniska Verkstad? once been. The property wants to increase the use of the old former foundry building with the adjacent ?plate-workshop? and believe there are two options for the building: That the building either should be used as a warehouse/concert hall, or rebuilt into a cultural center. An environmental evaluation has shown that the levels of heavy metals are over the Swedish environmental protection agency guidelines of less sensitive land.

This thesis examines how to improve the exhibition of products within retail for clothes and gift articles. The purpose is to investigate and test how light sources and different directions of light affect how the products are perceived regarding their exhibition. Our question formulations are:To what degree does the level of light in combination with the background of the interior design of a shop affect whether a product is perceived more or less attractive?What can we recommend to make the exhibition of products more attractive? From our observations shops nowadays have relatively high levels of light when they expose products on vertical areas. We have looked on the recommendation from ?Energimyndigheten? in order to see what they think is important when designing retail lightening.

The aim of this thesis is to investigate the correlation between the price of electric power and investments within the Swedish basic industry. Using regression analysis, the authors test for correlation between the electricity prices and the basic industry, defined as the pulp and paper industry, the mining industry, the steel and metal industry and the basic chemical industry. Moreover, five variables found in the literature on investment decisions are being used as a means of comparison. The results suggest that the electricity price affects the investment decisions within the basic chemical industry as well as the steel and metal industry. On a more abstract level, this thesis contributes to the understanding of one of the properties of the Swedish GDP..

This essay is about Late Iron Age settlement and its production. I want to define the nature ofthree different workplaces on Bornholm, Denmark, and compare them. My aim is to see if itis possible to define a workplace through the traces of the craftsmanship. Several materials areselected in this essay and the analysis provides different perspective on workplaces in the LateIron Age in Scandinavia. The results of the analysis between the three workplacesAgerbygård, Baggård and Kanonhøj shows that Baggård have more traces of melting of bronsthan any other of the places.

In the following study I probe the social world of hard-rock music. By conducting interviews with four young male enthusiasts of this music I try to develop a general picture of this social world, as well as of the basic elements on which this particular subculture is constructed. The identity of a hard-rocker is based upon a number of factors beyond just a preference for that music. Throughout the interviews I encountered many implicit norms that one must followed in order to be able to see oneself as a true hard-rocker. I also found that from the respondents? perspective, the mainstream culture has, throughout the history of metal music, used various ways to counter the spreading of this genre.

This bachelor thesis project has been executed at Outotec Sweden AB in Skellefteå. Outotecs main business focus is selling mineral and metal processing technologies. A rest product from the metal process is particle-polluted gas and cyclone designs are today the most commonly used abatement device for particle control. A cyclone provides a simple design with high efficiency particle percolation by using air streams.The purpose of this work is to reduce the time it takes create new cyclone designs in Outotecs projects. An extensive construction work is needed for every new cyclone order due to new designs.