Syftet med det här arbetet var att gestalta fem olika känslor inom genren symphonic metal. Därigenom ville jag avgöra vilka verktyg jag kunde ha nytta av i framtiden för att gestalta känslor musikaliskt och vilka skillnader som finns mellan att gestalta olika känslor. För att göra detta använde jag mig av referenslyssning av tio låtar plus några orkestrala stycken per känsla. Resultatet av lyssningen, tillsammans med olika låtskrivningstekniker, litteratur, Kirnbergers intervallkaraktäristik och Matthesons tonartskaraktäristik, användes till att skriva och arrangera mina fem låtar. Resultatet blev att jag hade lyckats skildra känslorna bra med den metod jag hade använt, men att intervallkaraktäristiken och tonartskaraktäristiken var onödiga; det skulle räcka med mina kunskaper som jag hade förvärvat under utbildningen, referenslyssning och min känsla som låtskrivare. Jag kunde inte heller urskilja några skillnader mellan att gestalta de olika känslorna; metoden var universellt tillämplig..

Syftet med det här arbetet var att gestalta fem olika känslor inom genren symphonic metal. Därigenom ville jag avgöra vilka verktyg jag kunde ha nytta av i framtiden för att gestalta känslor musikaliskt och vilka skillnader som finns mellan att gestalta olika känslor. För att göra detta använde jag mig av referenslyssning av tio låtar plus några orkestrala stycken per känsla. Resultatet av lyssningen, tillsammans med olika låtskrivningstekniker, litteratur, Kirnbergers intervallkaraktäristik och Matthesons tonartskaraktäristik, användes till att skriva och arrangera mina fem låtar. Resultatet blev att jag hade lyckats skildra känslorna bra med den metod jag hade använt, men att intervallkaraktäristiken och tonartskaraktäristiken var onödiga; det skulle räcka med mina kunskaper som jag hade förvärvat under utbildningen, referenslyssning och min känsla som låtskrivare. Jag kunde inte heller urskilja några skillnader mellan att gestalta de olika känslorna; metoden var universellt tillämplig..

In this paper the possibilities to replace metal with plastic in products for the building industry were looked into. The first part was a market examination where several suitable products were found. After evaluation the door latch for in-house doors was selected to be re-designed to better suit the properties of plastic.New types of mechanisms were designed with different functions that use the benefits of plastic materials. Models of these mechanisms were developed to evaluate their function. The components in the different mechanisms were adapted for manufacturing with injection moulding.To confirm that the plastic material could handle the appearing stresses calculations on the most vulnerable parts were carried out.

This thesis is a survey and also an investigation of the different factors that affects the cracking that occurs in the inserts at AB Sandvik Coromants production in Gimo. The work that has been done has focused on two main factors, namely, powder characteristics and pressing parameters.AB Sandvik Coromant produces tools and tooling systems for metal cutting. They have some problems in their production of inserts. The problem is that cracks sometimes occur in the body of the insert, after it´s pressed. In order to investigate this, a preliminary study was made in which production principles were studied.

The main purpose of this thesis has been to find a way to evaluate the soil parameters for the Total sounding method (TS), such as the inner friction angles and settlement modules. This study only includes an analysis of soil profiles from the Stockholm region. The chosen location for the study is a proposed residential area east of Igelstaviken in Södertälje. Presently, the subject plot is located in a residential area and is also adjacent to a school area.Total sounding is originally a Norwegian soil testing method. The differences between the sounding methods (weight-, ram-, CPT-sounding) are for instance how the sound is driven into the ground and what kind of parameters that are registered.

AbstractThe aim of this examination paper is to get an overview on the ?no-maintenance? windowsthat exist on the Swedish market, like plastic and aluminium windows.By way of introduction the reader gets knowledge in the background and problemformulatethat this subject has. This introduction explains why it has become so popular to changeyour windows into plastic- and aluminium windows and there is an existing scepticismagainst PVC and aluminium as construction material for windows.The main part of this report is constructed by segments of interviews where bothproducers of windows and stakeholders gets to answer questions about their viewing onno-maintenance windows from a material and construction point of view and where theproduction is headed to in the future. This is followed by an evaluation of a questionnaireon how pleased the house owners that changed their old windows to no-maintenancewindows are, followed by an inspection of windows made up from wood and an aluminiumclothing, windows made from only aluminium and PVC-based windows. It ends with atheory part about the materials PVC and metal based upon facts included in literature.By reading this report you can draw the conclusion that no window can be entirely nonmaintenancebut that the materials PVC and aluminium still are good substitutes for woodto lessen the maintenance..

Humidity problems and poor ventilation are factors that we associate with poor indoor airquality which are known to negatively affect health. Such problems have decreased with timein Sweden but, in other countries this is still a major problem especially during winter. InChile, this is most common in the central regions of the country, especially the Strait ofMagellan. This issue is primarily due to surface condensation happening indoors which bringsabout dampness which facilitates the growth of fungus and stains, foul odors, metal corrosionand more. This is due to a combination of poor ventilation and insufficient forms of heatingalong with buildings which have no insulation.

This thesis has been carried out at Diac Metal AB at Torsvik outside of Jönköping. The company produces parts for, amongst others, office furniture and store equipment. The essay will be concentrated on one detail which is included in many of their products.Today the company uses an ordering quantity based on experience which is rarely updated. Furthermore the operations are performed in both the company?s own engineering workshop but also an external workshop.The purpose with the report has been to check whether an updating of today?s batch shaping and ordering system can mean simpler storage control and possibly cost reduction.

The Earth and everything else in the universe was created in the Big Bang around 14 billion years ago. A point with tremendous density and mass began to expand and more and more atoms began to form. From the first and lightest like hydrogen and helium to heavier atoms such as iron and eventually gold. The formation of the Earth occurred about 4.6 billion years ago and so the first gold atoms were concentrated only here. It is however believed that much later in Earth's history an extra supply of gold occurred thanks to massive meteorite bombardments.

På uppdrag av Skärteknikcentrum Svergie AB i Gislaved gjordes en undersökning av driftstörningarna i produktionsprocessen hos tre olika medlemsföretag som kunde kopplas direkt till kvalitet på stångmaterialet som används. Undersökningen gjordes hos Gnosjö automatsvarvning AB, Finnveden Powertrain (Alvestafabriken) och Bufab Lann AB, alla arbetar med stångmaterial och har liknande tillverkningsprocesser. Uppgiften gick ut på att identifiera ifall det finns driftstörningar som enbart är beroende av kvaliteten på materialet samt vilka problem de leder till. Efter genomförda undersökningar och en större inblick hos de olika företagen konstaterades det att variationer i kvaliten på materialet har en effekt på hur produktionsprocessen fungerar. Störningar i produktionen kan reduceras ifall materialet egenskaper förbättras eller tillverkningsprocessen ändras.

Mussel meal is a potential source of protein, with a good composition of amino acids, for laying hens and broiler chickens, and may replace the use of fish meal in organic poultry production. Lead and cadmium are heavy metals which occur in the environment and can be accumulated in mussels. When poultry are exposed to heavy metals, the metals are absorbed in the small intestine and distributed in the body in the form of ions, complexes or bound to proteins. In poultry, lead accumulates in bone tissue, liver and kidneys, while cadmium accumulates in liver and kidneys. Generally very low concentrations of these heavy metals occur in muscles of broilers which have been exposed to feed contaminated with cadmium or lead.

The Swedish winters 2009/10 and 2010/11 were rich in snow and many roofs collapsed, mainly largespan frames. Investigations were made and the amount of snow was not the primary cause, insteadthere were several other causes. One of these was that in some cases roofs were shoveled in anunfavorable manner which affected the load patterns negatively, so causing the roofs to collapse.Most people lack the knowledge of how shoveling will affect the roof. Had there been an increasedunderstanding regarding shoveling, some roofs could have been prevented from collapsing.Through both qualitative and quantitative research in the form of interviews and calculations thetheoretically best ways to shovel a selection of roof types is presented in the report. The roofstructures covered are 3-compartment, continuous and Gerberspliced metal roof decks.

SECO Tools manufactures tool inserts for all types of metal cutting machining. (Ti,W)C is a common raw material used in the production. At arrival, the material (Ti,W)C is always analyzed. Titanium has previously been analysed with x-ray fluorescence spectrometry, but as the calibration has previously been performed with two different types of titanium (rutile and metallic titanium), the results has differed. Because of that, this thesis project has been devoted to analyze titanium, to find the best titanium compound for producing standards.The work has been performed using literature studies and many experiments in the laboratories at SECO Tools inFagersta,Sweden.

This report describes a Bachelor thesis work in which a robotised laser welding cell has been modelled and simulated for the purpose of making a presentation movie. The report shows that the work has been concentrated on making the movie from the modelling phase through the recording of the movie and ending up with the editing of the final presentation movie. A pre-study was made prior the Bachelor thesis work. In the pre-study a literature study was conducted about measurement and calibration of a welding cell. Measurement of almost all equipment in the entire cell was also conducted in the pre-study.

The purpose of this paper was to identify the elements and the alloys that five objects found in Birka consist of and to examine whether there are any significant differences between the presumably imported and domestic objects. The material was analyzed using a scanning electron microscope (SEM) which was equipped with an energy dispersive X-ray spectrometer (EDS) in order to identify the elements that are present and the alloys that the objects are made of. Then the SEM results were compared with the results of previous analyzes that have been performed on finds from Birka in order to investigate how the objects differ in elemental composition and to find out if there are any significant differences between them. The results showed that the objects? content of the elements analyzed varies as the copper alloys the objects are made of.