Mine waste from Ljusnarsbergsfältet in Kopparberg, Sweden, is considered to constitute a great risk for human health and the surrounding environment. Some of the waste rock consists of sulphide minerals. When sulphide minerals come into contact with dissolved oxygen and precipitation, oxidation may occur resulting in acid mine drainage (AMD) and the release of heavy metals. The purpose of this study has been to characterise the waste material and try to chemically stabilize the waste rock with a mixture of sewage sludge and calcium carbonate. The drawback of using organic matter is the risk that dissolved organic matter can act as a complexing agent for heavy metals and in this way increase their mobility.

This survey was made to investigate the possibility of using an alternative method of fencing inSwedish forestry. The most common way of fencing in Sweden today is made by a two meter highmetal net that is attached to turned impregnated poles. The fencing methods that have beeninvestigated is a fencing system made completely out of wood so called ?German wood fence?.Browsing of game in forest regeneration areas is often a big problem and some kind of protection ofthe plants is often necessary. There is several ways of building fences and the most common way isto use metal nets and impregnated poles, this leads to a problem when the fence has profiled itspurpose.

Detta examensarbete handlar om hårdrockssångares medvetenhet när det gäller sångteknik. Syftet med arbetet är att få kunskap om vilka tillvägagångssätt de har använt sig av när de skapat sitt sound och hittat sin teknik. Den teoretiska utgångspunkten för studien är det sociokulturella perspektivet. Tidigare forskning inom området behandlar traditionell röstlära, mer moderna sångskolor och socialkulturella normer gällande inlärning. Jag har använt mig av den kvalitativa forskningsintervjun som metod och mina informanter är verksamma inom området.

Österbyverken is an industrial estate in Östhammars municipality in Uppland, Sweden. Many different activities have taken place on the estate the last 600 years. During the last 15 years both health and environmental studies have been made by different companies. At the most recent study a great increase of metals in Nerån, a river that runs partly through and partly next to the estate, was identified with mass balances. The purpose of this thesis is to accomplish a deepened study about the reasons for the increase of metals in Nerån.

AbstractThe assignment were assigned by Camatec Industriteknik AB. Camatec is a Karlstadlocated consulting company, they make everything from pilot studies to complete projects in mechanical design and calculation. They even have their own patented product, Camcoil. It is a winder for steel strips and is used for example with hardening of the steel strip. The assignment has been to solve the problems encountered by some customers within this product.

This survey was made to investigate the possibility of using an alternative method of fencing inSwedish forestry. The most common way of fencing in Sweden today is made by a two meter highmetal net that is attached to turned impregnated poles. The fencing methods that have beeninvestigated is a fencing system made completely out of wood so called ?German wood fence?.Browsing of game in forest regeneration areas is often a big problem and some kind of protection ofthe plants is often necessary. There is several ways of building fences and the most common way isto use metal nets and impregnated poles, this leads to a problem when the fence has profiled itspurpose.

This project has been about illustration, text and format with illustration as the main communication path.A study has been made of how these three elements interact, particularly how text and format affect the illustrations. The goal has been to create an illustrated story in a form of a book. The story is about the feeling of being alienated from other people and invites the reader to make their own interpretations. The main target audience has been the ones who is interested in illustration and storytelling, no matter of age.Colors has been inspired from animated movies and the natur. Various textures such as wood, fabric and metal for example has been scanned to create a rough feeling.

The project has been oriented for development of fixtures to ateljé Lyktan to provide a more efficiency line. In the year 2012 the company invested in a new coating booth, which leads to opportunities to upgrading the fixtures and also new design. The request is to minimize the area for storage of fixtures, and therefore should fixtures be designed to apply as many articles as possible The priority of products that fixtures have development to has been products that are most frequently coated and new products that don?t have any fixtures. The product families that the project has been having focus on is TIME and FOVEA with RONDO.

Chemical stabilization of mine waste from Ljusnarsbergsfältet with sewage sludge and calcium carbonate residuesMine waste from Ljusnarsbergsfältet in Kopparberg, Sweden, is considered to constitute a great risk for human health and the surrounding environment. Some of the waste rock consists of sulphide minerals. When sulphide minerals come into contact with dissolvedoxygen and precipitation, oxidation may occur resulting in acid mine drainage (AMD) and the release of heavy metals. The purpose of this study has been to characterise the waste material and try to chemically stabilize the waste rock with a mixture of sewage sludge and calcium carbonate. The drawback of using organic matter is the risk that dissolved organic matter can act as complexing agents for heavy metals and in this way increase their mobility.

The following study aims to investigate the environmental conditions of the harbor of Sk?rhamn, a small fishing community on the west coast of Sweden. The interest to do so rose as a newly built apartment residence failed to connect the sewage pipes of 18 apartments, causing the untreated sewage running into the sea. The parameters accounted for are the C/N ratio, total organic carbon (TOC) as well as total nitrogen present (TN) and ?13C in the top ten centimeters of a sediment core retrieved in the Sk?rhamn harbour.

The project has been oriented for development of fixtures to ateljé Lyktan to provide a more efficiency line. In the year 2012 the company invested in a new coating booth, which leads to opportunities to upgrading the fixtures and also new design. The request is to minimize the area for storage of fixtures, and therefore should fixtures be designed to apply as many articles as possible The priority of products that fixtures have development to has been products that are most frequently coated and new products that don?t have any fixtures. The product families that the project has been having focus on is TIME and FOVEA with RONDO. In the developing of fixtures have ideas been discussed with the staff, and instructions were made about how you are suppose to hang up the different products.

The purpose of this thesis for Sapa Heat Transfer is to examine a furnace in which aluminium is pre-heated before hot rolling. The project is modeled in a computer environment in which the air flow in the furnace and the heat transfer to the aluminium solids are included. The computer environment and its governing equations, as well as boundary conditions and generalizations, are presented and explained.The simulations are based on two models. The first model has an asymmetric solid placement, which is how it looks in today's ovens. It is validated against collected data.

Our environment affect us, not least gardens. By practising the ancient Chinese art feng shui, one could find tools how to create harmony and balance in gardens. By paying attention to different energies working with colours, shapes and materials one can create a nice garden with good feng shui. The philosophy, however, includes much more than what plants or what hard materials to choose in the garden. It describes different energies, the movement of energies, which we can learn to live in harmony with.

Syftet med det här arbetet var att gestalta fem olika känslor inom genren symphonic metal. Därigenom ville jag avgöra vilka verktyg jag kunde ha nytta av i framtiden för att gestalta känslor musikaliskt och vilka skillnader som finns mellan att gestalta olika känslor. För att göra detta använde jag mig av referenslyssning av tio låtar plus några orkestrala stycken per känsla. Resultatet av lyssningen, tillsammans med olika låtskrivningstekniker, litteratur, Kirnbergers intervallkaraktäristik och Matthesons tonartskaraktäristik, användes till att skriva och arrangera mina fem låtar. Resultatet blev att jag hade lyckats skildra känslorna bra med den metod jag hade använt, men att intervallkaraktäristiken och tonartskaraktäristiken var onödiga; det skulle räcka med mina kunskaper som jag hade förvärvat under utbildningen, referenslyssning och min känsla som låtskrivare. Jag kunde inte heller urskilja några skillnader mellan att gestalta de olika känslorna; metoden var universellt tillämplig..

Today many different types of lock systems are used all over the world. Passwords, finger prints and magnetic strips are a few examples. When the key is a three dimensional object, lika a physical metal key, the security depends, in a high degree, on that you can?t copy the object without access to it. One approach to copying the object is photographing the object, and from these photographs create a copy.