In this thesis we investigate the level of deliberative democracy in the current implementation of the 24/7 Agency in the local government. We are interested in how the combination of the two seemingly opposing ideals of Demokratiutredningen and the 24/7 Agency is solved. Our analysis is based on interviews with civil servants from three kommuner in Skåne and a schematic overview of their websites. As a theoretical framework we use New Public Management Theory, Deliberative Democracy Theory, and Citizen Theory.We have found that the local 24/7 Agency is initiated and implemented by public servants. Their experiences and worldview is mirrored in both process and result.

Humidity problems and poor ventilation are factors that we associate with poor indoor airquality which are known to negatively affect health. Such problems have decreased with timein Sweden but, in other countries this is still a major problem especially during winter. InChile, this is most common in the central regions of the country, especially the Strait ofMagellan. This issue is primarily due to surface condensation happening indoors which bringsabout dampness which facilitates the growth of fungus and stains, foul odors, metal corrosionand more. This is due to a combination of poor ventilation and insufficient forms of heatingalong with buildings which have no insulation.

Project Safe Sleeping Position (SSP) contains all parts in a product development phase. The project comprises the whole cycle from idea to a complete product where all aspects are included. The scope is to develop an innovative solution for a common known problem and work with all parts within the man-machine-way. The result is an inflatable product which secures a child in the correct way for the seatbelt to work properly in the rearseat of a car. Ergonomics, technical extent, usability, design, construction, product solutions and market potential are some of all parts witch the project includes.

This thesis has been carried out at Diac Metal AB at Torsvik outside of Jönköping. The company produces parts for, amongst others, office furniture and store equipment. The essay will be concentrated on one detail which is included in many of their products.Today the company uses an ordering quantity based on experience which is rarely updated. Furthermore the operations are performed in both the company?s own engineering workshop but also an external workshop.The purpose with the report has been to check whether an updating of today?s batch shaping and ordering system can mean simpler storage control and possibly cost reduction.

The Earth and everything else in the universe was created in the Big Bang around 14 billion years ago. A point with tremendous density and mass began to expand and more and more atoms began to form. From the first and lightest like hydrogen and helium to heavier atoms such as iron and eventually gold. The formation of the Earth occurred about 4.6 billion years ago and so the first gold atoms were concentrated only here. It is however believed that much later in Earth's history an extra supply of gold occurred thanks to massive meteorite bombardments.

This report describes the development process of a pipe clamp used on exhaust system for cars. It is made based on the manufacturers desire to improve and make the clamp easier to manufacture and to reduce its price to their customers. This should be done either by manufacturing the clamp in one piece without an expensive and work intensive welding process, or by generating ideas of how to develop a brand new type of clamp. Investigating the market for similar products was done to eliminate intrusion of other manufacturers? patents but also to generate ideas.

Background: The purpose of the present study was to investigate the prevalence and characteristics of deliberate self-harm in a Swedish University population.Method: A random sample of first year students at University of Kalmar was invited to participate in an Internet-based survey in the autumn of 2007. A total of 139 (53,1 %) completed the anonymous survey.Results: The results showed that 25,2 % (n=35) of the students reported having engaged in some kind of deliberate self-harm at least once, and deliberate self-harm was endorsed by 7,9 % within the past year. The most frequently procedures to self-harm were to tear, carve or pinch self, cutting skin and hitting self on purpose. 37,1 % reported that they had told no one about their self-injurious behaviors and 36,4 % significantly reported that they had no one they trusted and who they could talk to if they were concerned about something. Students with self-injurious behavior were also more likely to report a history of emotional, sexual and/or physical abuse, alcohol and drug use, cut classes and questioning their sexual orientation.Conclusions: Findings suggest that self-harm is associated with risk factors and that self-injury is not only associated with adolescence but also with adulthood.

Mussel meal is a potential source of protein, with a good composition of amino acids, for laying hens and broiler chickens, and may replace the use of fish meal in organic poultry production. Lead and cadmium are heavy metals which occur in the environment and can be accumulated in mussels. When poultry are exposed to heavy metals, the metals are absorbed in the small intestine and distributed in the body in the form of ions, complexes or bound to proteins. In poultry, lead accumulates in bone tissue, liver and kidneys, while cadmium accumulates in liver and kidneys. Generally very low concentrations of these heavy metals occur in muscles of broilers which have been exposed to feed contaminated with cadmium or lead.

The company Somas, Säffle, has assigned Fredrik Kjellin the project of finding out how ?KVTF DN250?, one of their own valves, reacts on cutting forces under production. They wish to know if and then how much it?s possible to minimize the wall thickness of the valve with neither plastic nor to big elastic deformations caused by processing.The most critical processes have been identified as rough lathing. The study has shown that the marginal for a wall thickness of two millimeters, to fall short of the yield stress in the most critical process, is good.

The Swedish winters 2009/10 and 2010/11 were rich in snow and many roofs collapsed, mainly largespan frames. Investigations were made and the amount of snow was not the primary cause, insteadthere were several other causes. One of these was that in some cases roofs were shoveled in anunfavorable manner which affected the load patterns negatively, so causing the roofs to collapse.Most people lack the knowledge of how shoveling will affect the roof. Had there been an increasedunderstanding regarding shoveling, some roofs could have been prevented from collapsing.Through both qualitative and quantitative research in the form of interviews and calculations thetheoretically best ways to shovel a selection of roof types is presented in the report. The roofstructures covered are 3-compartment, continuous and Gerberspliced metal roof decks.

Background: The hurricane in the south of Sweden in January 2005 was the worst storm in Sweden for the last hundred years. The storm named Gudrun has blown down forest that according to estimation is corresponding to one year of cutting down in the entire country.Purpose: The purpose of this thesis is to describe how credit granters act when facing falling forest real estate mortgage and describe if they will make considerations due to the storm in the south of Sweden 2005.Method: With help of a qualitative method, we investigated how the credit granters act when facing falling forest real estate mortgage. Interviews were obtained with three credit granters, SEB, Landshypotek and FöreningsSparbanken in the county of Jönköping and Kronoberg.Conclusion: The conclusion is based upon the empirical study, the analysis and our own reflections and it shows that the credit granters do not change their policy concerning credit granting to forest real estate properties. The policy of the credit granters has proven to be valid even in this extreme situation..

The aim of this study is to shed light on the phenomenon of destructive sexual behavior among youth from the perspective of professionals working at nonprofit organizations. To examine this, we used a qualitative method; we interviewed professionals working at nonprofit organizations. To analyze our results we used gender theory and empowerment theory. Our main results are that the professionals view this behavior as deliberate self-harm, such as cutting, as they do it to achieve relief from anxiety. Also, the professionals think that gender norms affect young people with destructive sexual behavior in that it imposes guilt and shame, which inflicts their already low self-esteem and makes them feel inferior.

The thesis investigates if it is possible to replace several pumpimpellers with one controllable pumpimpeller, with a economical and a manufacturing analisys aspect. The studied pumpimpeller is mounted on a midrange wastewaterpump, N3127MT.In the thesis a contemplated manufacturing process is evaluated for a concept that are supposed to act as a controllable pumpimpeller. The pumpimpeller are studied in a manufacturing and flow matter and are presented in the thesis.The manufacturing cost is also estimated, and this has been compared to the storage cost and other costs that the existing pumpimpeller generates.The thesis also shows that the concept has minor losses in cutting quality aswell as the effiency comparing to the existing pumpimpeller.The concept also raises the manufacturing cost and this increasing cost makes the presented concept to expensive to carry through.An investigation of the costs that the existing pumpimpeller produces has also been done, and this shows that there is not that much expenses to earn regarding to for example the storage cost. The storage cost includes information from Flygt?s central storagecenter in Lindas, Sweden and Metz, France, and also an inventory about the pumpimpellers located at Flygt?s different distributors worldwide.The thesis shows that a controllable pumpimpeller will generally increase the cost for the pumpimpeller and the performance of the pumpimpeller will decrease..

This paper deals with village history around millstone quarry Eastern Utsjö in Malung, Sweden, in the hope of finding deposits that could date the quarry, in that the quarry in the current situation is dated only by the millstone fragments outside the resort. My purpose was to conduct a discussion on the quarry alone can be dated by deposits outside the resort. I have used FMIS RAÄ:s fornsök and a lot of literature to identify village history. The results showed that it is not possible to date the millstone quarry from village history, but through deposits outside the resort of Malung, which have been found around Mälardalen, Sweden through archaeological excavations, and derived from the millstone quarry Eastern Utsjö, can put an age on the quarry..

In Sweden today so-called "prescribed nature conservation burning" is performed due to the change in silvicultural law, certification and an increased knowledge regarding the field of fire in the forest landscape. The aim is to re-create structures and qualities made by the fire regimes of the past, though on a much smaller geographical scale. The structures and qualities to be re-created are for example broad leaf stands, trees with large diameter, heterogeneous stands regarding variables such as age and diameter. If we increase our knowledge of the constitution of forests characterized by fire, then we will be able to set goals for what achievements to reach both on landscape scale and stand scale. The aim of this paper is to try to describe how a stand from the past was composed regarding mainly the spatial arrangement and compare it with the stand of today in the same place. This to be done by using relict material, that is stumps and dead standing trees.