The overall purpose of this essay is to study in which degree the democratic model that is called participant democracy works in the Swedish municipalities. To achieve what I set out to do I will focus on a central political area in which the Swedish municipalities has sovereignty versus the state, in other words in an area where they rule themselves. That political area will then represent how well the participant democracy works in the Swedish municipalities. The research questions then becomes:Does the participant democracy at Swedish Municipality level work in a satisfying way?Does the participant democracy in a large Swedish Municipality in a central political area work?Does the participant democracy in a small Swedish Municipality in a central political area work?Are there similarities and differences between the municipalities?If so, how can that be explained?To answer these questions I will study documents regarding the planning and building area.

Uppsala like many other Swedish cities is affected by heavy housing shortage, in terms of too few existing flats and residents within the city limits. Every semester thousands of new students are facing the same problems of finding themselves adequate accommodation. The waiting lists for flats and student-dorms are getting longer for each year, and the situation is just getting worse. Simultaneously, Uppsala?s ambition is to increase its population and expand as a Swedish metropolitan, according to the Swedish governmental environment goals. This paper investigates and analyses the possibilities of expanding a city?s population by building high-rise buildings.

Svenska Aerogel AB has developed the material Quartzene® which is of the typeprecipitated silica and contains calcium - magnesium silicate ((Ca, Mg) SiO3). Thematerial is used for molecular filtration of contaminated air. Qartzene?, which is inpellet form, is porous and has a high internal surface which is a requirement for themolecular filtration. With the use of various impregnations, filtration can affect thedesired outcome.

Som hjälpmedel inför projektering, byggande och fastighetsförvaltning finns ett antal verktyg för att kunna göra miljöbelastningsprofiler för byggnader. I denna rapport har två metoder använts för att göra en miljöbedömning av ett flerbostadshus. Metoderna är EcoEffect och Green Building Challenge. EcoEffect är en svensk miljövärderingsmetod för att mäta och värdera miljöpåverkan från en fastighet under en tänkt livscykel. I EcoEffect beskrivs miljöpåverkan som negativ påverkan på människors hälsa och ekosystem samt utarmning av naturresurser.Green Building Challenge är ett internationellt samarbete som startades 1996 med syfte att använda en gemensam värderingsstruktur för byggnader.

In conjunction with today?s increasing competition within the construction sector, more pressure is being placed on building contractors. Efficiency and improvements are necessary but without impairment to an ergonomic and safe construction site. This in is in order to reduce the construction costs and time but to retain the ability to deliver a high-quality contract.Various methods and prefabrication degrees are used, depending on the project's requirements and conditions. This analysis sets out to investigate and exhibit what qualifications are important when choosing a construction method for curtain walls.Advantages and disadvantages with each method have been analyzed and recommendations have been given to show when different methods are best suited.

The purpose of this thesis is to investigate the degree of influence of holes in the web of steel beams with long spanson weakening of their bearing capacity. Making holes in the web of the beam generally reduces the bearing capacity of the beam. However, it might be necessary seen from both an architectural perspective as well as from a building services perspective by creating an opportunity for building installations.The objective of this thesis is to examine how much an I-beam can be weakened without sacrificing safety and functionality. The investigation has been done by using Finite Element Method through commercial software.The regulation for structural design of building structures in Sweden used to be specified in the document known as BKR. But this was replaced by the European norm Eurocode back in May 2011.

It is common knowledge that our horses do occasionally hurt themselves and cause damage to their bodies. They also manage to do it in the most remarkable ways. The problem is not that they hurt themselves, because everybody does so from time to time. The problem is that they often experience difficulties with the healing of the wounds. The cause to that problem is the fact that they often lose a vast amount of tissue, the wound is more often than not extensively contaminated and the wound is often found a long time after the accident occurred.

Most of today?s concrete structures that are built on site are mainly constructed in a traditional fashion with a lot of artisanal operations. One step towards industrializing the in-situ construction of concrete is to use prefabricated reinforcement. Through this method there can be a lot of savings when each bar doesn?t have to be placed and fixed separately on site.

Åfors glasswork was a company which started in 1876 and closed in 2012 due to the bad economical situation in the company. After its closure, the glasswork left behind contaminated soil with different concentrations of heavy metals such as, arsenic from arsenic trioxide, a chemical used to remove bubbles during the melting of glass, and lead oxide, a chemical used in the production of crystal glass. Crystal glass?s production occurred under 1921-1971, but emissions of lead into the air from Åfors glasswork continued until 2011, because of the artist Bertil Valliens? artglas was made in Åfors glasswork from 1970?s and onwards.The aim of this study was to estimate how much lead (Pb) and arsenic (As) that were released by Åfors Glasswork into the atmosphere during the operational period of the glasswork in comparison with how much of lead and arsenic were purchased for the company. Added to the assistance of the data from National Archives the variations in the activities of Åfors glasswork could be shown.

WSP building physics in Stockholm has certified the preschool Temmelburken in Bromma with the system of certification Miljöbyggnad. The rating of the building became BRONZE. In this thesis the preschool has been investigated with respect to the three areas: thermal climate, use of energy and improving of the level of certification. The thermal climate at the preschool has been investigated by a questionnaire survey and by measurements in order to do comparisons between the results from the two investigations as well as with the results of the simulations that WSP has done at the certification of the preschool. The differences between the results from the simulations and the questionnaire survey for winter as well as from the measurement performed with a comfort meter the 19th of March are concidered to be reasonably small since they give rise to the same rating according to Miljöbyggnad.   Operational data for the use of energy for the preschool have been obtained in order to do comparisons with simulations performed by WSP and Svenska Besiktningar AB. The comparison shows that the simulated values for the specific use of energy are lower than what the real specific use of energy would be for the preschool, since just the operational data for the heat energy is higher than the simulated values. At the investigation of the possibility of improving the level of certification it was found that the rating of the preschool can be raised from BRONZE to SILVER by improving the ratings of the ?thermal climate summer? and the ?daylight?.

A home for elderly is planed to be built at Zakrisdal, Karlstad, Sweden. The heat source for the building was at the time not determined. In order by the local government of Karlstad this report is meant to examine if the need of heat could be provided only by solar heat combined with a seasonal heat storage. The problem to solve is, if the need of heat from the home for elderly is provided from only solar heat, whitch dimensions of the solar collectors and the storage is needed?.

With a growing population on earth the amount of end-of-life vehicles (ELVs) and other scrap steel increases. The European Directive 2000/53/CE? requires a minimum of 95 % reuse and recovery and 85 % re-use and recycling no later than 1 January 2015, for end-of life vehicles. This imposes a need for more efficient recycling and recovery. Despite this shredder residue (SR) is commonly land filled.This report investigated the magnetic fines residue generated at Stena Metall shredder facility in Halmstad, Sweden.

This master thesis encompasses an inventory and risk classification of four disused landfills within the municipality of Uppsala, Sweden. The model of the classification; ?Method of Surveying Contaminated Sites? is developed by the Environmental Protection Agency and can be used as a framework to investigate and describe the environmental damage and the level of risk for each object. The risk classification model has a rating from 1 to 4, where 1 represents a very high risk while 4 is a small risk. Risk class depends largely on the type of land use that exists on the object, and hence, various benchmarks must be taken into account.

3D-modelling in AutoCAD This thesis is done in cooperation with LB-Hus in Bromölla, and have aimed to establish a digital AutoCAD model of one of the company?s house types and to find out what opportunities there are to do visualisations in the form of images directly from the programme. Modeling has been carried out so that the very construction of the house is included. Interiors and installations, with the exception of the ventilation system, have been left out in the model. The model has been created with solid models after a comparative study made between solid models and surface models to find out which option in this case was the easiest to handle and took up the least space.

On commission of the County administrative board in Värmland County a method was developed for analysis of the occurrence of artificial land use at lakes and watercourses. With artificial land use is meant land significantly affected by man. Two bases have been used to carry out the analysis. In one of the analysis the vegetation database and in the other GSD¹-Marktäckedata (land cover data) was used (this method has been used by County administrative board in Jönköping County).The analysis comprises all watercourses within Alsterälven river basin. The digital water bodies are created by the Swedish Meteorological and Hydrological Institute on the basis of GSD-Översiktskartan (general map).