Journalists and communication managers are becoming more professional and to reach out to its stakeholders in society today, organizations must work strategically with communication, to enter the news. Many make use of press releases to provide journalists with information, hoping to influence what is published on the news. With a background in the medial change that occurs is the purpose of this study to elucidate and problematize which role press releases has for newsrooms and for organizations today and in the future. A qualitative interview study has been used, and communication managers from three organizations and journalists from three newsrooms has been interviewed. The study has been combined with a quantitative pilot study of selected press releases and articles from the selected organizations.

This thesis is a survey and also an investigation of the different factors that affects the cracking that occurs in the inserts at AB Sandvik Coromants production in Gimo. The work that has been done has focused on two main factors, namely, powder characteristics and pressing parameters.AB Sandvik Coromant produces tools and tooling systems for metal cutting. They have some problems in their production of inserts. The problem is that cracks sometimes occur in the body of the insert, after it´s pressed. In order to investigate this, a preliminary study was made in which production principles were studied.

The purpose of this paper is to clarify and understand the difference between Brunius?, Zettervall's and Graebe's valueing of a historical building, the cathedral of Lund. Between 1833 and 1963 the cathedral of Lund went through three larger restorations. The character of the restorations however differs a lot between the three church architects, Brunius, Zettervall and Graebe. In a time of low interest for the Middle Ages and of many demolitions of churches in the countryside, Brunius stood out as a researcher and an enthusiast of that special time.

Uppsalahem AB is a municipally owned real estate concern that owns and administrates housing for nearly 30 000 people. The company puts a lot of effort into reducing the energy use of their housing stock. This project is a master?s thesis in the energy systems programme at Uppsala University, carried out in collaboration with Uppsalahem. The aim of this thesis is to provide energy saving measures for fourteen student housing buildings in Uppsala, Sweden.

Citizens are in need of information to form an opinion about how society works. As a reviewer of the Public power the media plays an important role in a democratic society. The communicative power shift appears in contemporary media landscape, where technology offers great opportunities for actors to use their own channels to communicate their own image and thereby influencing power over the agenda. Alongside this, the number of communicators is increasing which makes power of resources affects the communicative whole picture. The study is based on a media profile case of the described assault and looks at what can happen strategic communicative at a police department when journalism offers a negative image.

Energy supply in Sweden year 2011 amounted to 577 TWh. The final energy consumption for industrial, residential and service was 379 TWh. Sweden has energy policy goals to reduce energy use in buildings. One of these goals is to reduce the energy use by 20 % in 2020 compared to the year 1995. An important step to achieve this goal is to target energy efficiency measures in existing buildings.

The purpose of the case study is to research whether the brand Hollister can establish themselves to their target audience working with communication. To achieve the goal with the study, the following theories has been applied: brand building, visual communication, two-way symmetrical communication and communication channels. The study was conducted by a quantitative online questionnaire survey. The online survey was aimed at teenagers aged 15-18 years old living in Täby or Umeå where one question was "What difference can be discerned between Täby, where there is a shop, and Umeå where there is no shop". The material was collected during a period of eight days between december 11th to december 19th 2013.

Sweden has long had access to low electricity prices due to the wide availability of hydro and nuclear power. This has now changed because of today's rising electricity rates resulting in increasing heating costs for properties, especially in the properties with electric heating systems."Ankaret" is a parish for "Svenska Alliansmissionen", which is located at "Gullbrannagården".The parish has installed electrical radiators and an exhaust ventilation system that makes the energy demand high due to the large ventilation flows. The building was built as the price of electricity was still low and would reduce energy use today by combining its heating system with an air/air heat pump. The heat pump delivers more heat into the room than the electrical energy that it uses. This lowers the electricity needs.

Moisture damage in kitchens is an area that many people believe to be irrelevant andnot a subject to concern, however the problems encountered might be larger thananticipated.The purpose of this essay is to get a view of how problematic moisture damagecurrently is as well as what can be done to prevent damage during the constructionand building of new housing.Statistics regarding moisture damage as well as several tools for damage preventionhave been studied and investigated. Industrial regulations have been reviewed tounderstand the requirements construction companies must legally follow during theconstruction and building of new kitchens. Home manufacturers and largerentrepreneurs have been contacted in order to get their point of view regarding theproblems with moisture damages in kitchens.The knowledge of moisture safe constructions is prevalent by home manufacturers,insurance companies and entrepreneurs. Despite this knowledge, the constructioncompanies predominately follow the industries regulations, which normally onlyimplement the minimum requirements.In order to get construction companies to design and build kitchens with increasedmoisture security, stricter industrial regulations might be needed to be implemented.Unlike bathrooms and laundry rooms, kitchens are not defined as a ?wet room? andthe regulations for the construction of kitchens are more lenient.It is difficult to detect water leaks in an early state and the moisture damage is usuallyextensive before it is discovered and repaired if the kitchen lacks moisture securedconstruction and water security.

The purpose of this study is to propose and formulate quantitative indicators to help measure an aspect of the Environmental Objectives in Swedish legislation: ?A Good Built Environment, Interim Target 2.? The governmental bill 2004/05:150 suggests changes to Interim Target 2: By 2010 built environments of cultural heritage value will be identified and placed under long-term sustainable management. Following the revised formulation regarding sustainable management, indicators should be formulated to measure the fulfilment of sustainable management of built environments of cultural heritage value. An important part of management takes place at the municipal level of planning, where detailed development plans include regulations to protect built environments of substantial cultural heritage value. As a result, this study is focusing upon the regulatory function of the Swedish Planning and Building Act in respect to the built environments of cultural heritage value.

Producing a building is a long and complex process. It consists of several parts, from the feasibility study and design stage onto the construction and finally the management of the building. The design process is a critical part of the process where construction plans are made. The quality of the plans affect the production phase in great extent and faulty plans can pose a risk for extra costs for all parts in the process. The cost of producing dwellings has increased the last years and the detail design process is one of many phases where improvements can mean cost savings within the whole building process.This report aims to point at parts within the detail design process which could be more efficient, regarding communication, follow-up and time planning, and to give suggestions for improvements.

Population growth leads to an increased need for new buildings, both residential and commercial. The regulations of structural design also changes with time. From a sustainable community perspective it may be profitable if existing buildings, that no longer performs their original function, are reconditioned. Knowledge and understanding of the surroundings of the residence must be available. Regulations regarding accessibility to all has increased.

BIM, Building information modeling, anses idag som det nästa stora arbetssättet som kommer revolutionera arbetet inom byggnads- och anläggningsbranschen. Det tros att BIM kommer förändra hela branschen med allt från entreprenörer och konsulter till statens beställare. Företagen i Sverige tar ett sort ansvar för att utveckla och implementera BIM som arbetsmetod då de idag ser vinsterna som kommer komma med BIM. För BIM är inte bara ett arbetsredskap eller en teknik utan det är en helt annan arbetsmetod som kommer leda till många fördelar. Denna rapport presenterar översiktligt vad BIM är för den som inte riktigt vet vad det innebär och hur nuläget ser ut idag i Sverige inom byggprojektering och även lite i övriga världen.

NCC has given us a commission to investigate a planned housing area in Haga, Karlstad, situated close to the traffic route Hagaleden and the railway. The housing area consists of one hundred apartments in five different houses. The houses are linked to each other by balconies with glass panels. A long carport is situated between Hagaleden and the housing area to absorb part of the noise from the road. The design of the housing area is creating a silent backyard.

AbstractThe aim of this examination paper is to get an overview on the ?no-maintenance? windowsthat exist on the Swedish market, like plastic and aluminium windows.By way of introduction the reader gets knowledge in the background and problemformulatethat this subject has. This introduction explains why it has become so popular to changeyour windows into plastic- and aluminium windows and there is an existing scepticismagainst PVC and aluminium as construction material for windows.The main part of this report is constructed by segments of interviews where bothproducers of windows and stakeholders gets to answer questions about their viewing onno-maintenance windows from a material and construction point of view and where theproduction is headed to in the future. This is followed by an evaluation of a questionnaireon how pleased the house owners that changed their old windows to no-maintenancewindows are, followed by an inspection of windows made up from wood and an aluminiumclothing, windows made from only aluminium and PVC-based windows. It ends with atheory part about the materials PVC and metal based upon facts included in literature.By reading this report you can draw the conclusion that no window can be entirely nonmaintenancebut that the materials PVC and aluminium still are good substitutes for woodto lessen the maintenance..