This study evaluates the retention of nitrogen and phosphorus in four newly constructed wetlands in the municipality of Falkenberg, Sweden. The four wetlands have been selected because they have been specifically constructed with the aim to reduce nitrogen and phosphorus in farming areas. The process of selecting the specific wetlands has been done in collaboration with the county administration in Halland. Through field studies in collaboration with the landowners where the wetlands are sited, the areas that provide the wetlands with water were determined. The size of these drainage areas were determined in a GIS computer program. The type of land use within the drainage areas was also determined.

Syftet med det här examensarbetet är att undersöka om det är möjligt att överföra hallbyggnadsteknik till produktion av småhus för att sänka produktionskostnaderna. Studien visar att hallbyggnadsteknik enkelt går att överföra till en villa. Dessutom blir det billigare att bygga klimatskalet med vårt byggsystem jämfört med ett traditionellt prefabricerat småhus. Genom detta system kan den totala byggkostnaden för villan i jämförelsen sänkas med 3-10 % beroende på vilket fasadmaterial som väljs..

This report is a bachelor's thesis of two students from the Energy and Environment degree at KTH Stockholm. Grinda is an island situated Stockholm archipelago. Skärgårdsstiftelsen is landowners and manages the area. Grinda Wärdshus, a guest house located in the island, currently uses an oil-fired boiler as a heating system. The aim of this thesis is to investigate whether wood chips or pellets is, from a sustainability standpoint, a suitable heating method for the guest house.

This dissertation is performed at the request of Lagafors AB who develops and manufactures stationery and mobile hygiene solutions for companies in the food- processing industry. The objective of this dissertation is to develop and construct a new, cost efficient cleaning station based on an innovative technology.The technique is based on serially connected dosing pumps which allow the customer to work with concentrated detergents. This leads to serious reduction in the clients use expenses. Two units have been developed with this technique, one that is stationary and one that is mobile.The dissertation has led to good results which resulted in the sale of the first stationary unit of the Lagafors CPU before the end of this dissertation. .

The energy use in a workshop company has been examined in this work in order to find areas for energy efficiency improvement. The combined oil and electricity heating in the company were compared with other alternative heating systems including cooling of the premises in following combinations:Ground source heat pump for heating and coolingDistrict heating and absorption coolingDistrict heating and low temperate surface water coolingEnergy use, operation costs and carbon dioxide emissions were calculated for the current heating systems and the three alternatives including cooling. The ground source heat pump for heating and cooling decreases bought energy with 34 MWh annually compared to current heating only. The district heating and low temperate surface water cooling has the largest reduction of operation cost and carbon dioxide. The operation cost decreases with 42 kSEK and the carbon dioxide with 43 metric ton CO2 annually.

Industrial buildings are increasing all over Sweden. Farmers are building new modern facilities and the government chooses to build new halls to invest i youth sports. Glulam is the most common framework but there are limitations because of the transport. Therefore, there is a need to develop new solutions to increase the use of glulam.The maximum torque in the eaves was found in the frame with a roof pitch of 18 degrees and a wingspan of 25 meters. Using hand calculations according to Eurocode and comparison with the computer software StatCon, the maximum torque, shear force and utilization rate is calculated.

En person som blir utsatt för ett frihetsberövande på grund av misstanke om brott är berättigad till ersättning från staten om hen sedermera inte blir dömd. Enligt frihetsberövandelagen kan sådan ersättning omfatta kostnader för utgifter, förlorad arbetsförtjänst, intrång i näringsverksamhet och lidande. Syftet med uppsatsen är att beskriva och utreda hur lidandet ersätts av JK och staten samt vilka faktorer som kan påverka lidandet för den felaktigt frihetsberövade personen. För att klargöra vad som faktiskt anses påverka lidande har förarbetena till lagen samt ett flertal olika JK-avgöranden och domstolsavgöranden studerats. Ersättning för en persons lidande utgår med ett normalbelopp enligt en intern mall hos JK, som baseras på en förutbestämd summa pengar per månad.

The purpose of the house which is the basis of this report is to be able present itself on the market as a relatively cheap and at the same time a climate friendly choice. The house is supposed to be able to be built anywhere in Sweden and the rest of Scandinavia in a short period of time. This puts demand on what kind of heating system the house can have, since not all places have the geographic advantage of being able to use geothermal or district heating. Therefore the heating system choices will only include those that are not limited by their geographic location. The house will be built in modules which only require the groundwork to be done before the house can be erected. In this report "System solutions for plus or passive-housing" a comprehensive literature search has been conducted as well as a number of calculations.

The idea with constructions made out of prefabricated elements is that it should be quick and easy to build as the demands for lower production costs, increased profitability and shorter production times are constantly increasing. High accuracy in measurements and well-balanced tolerances is required to achieve this. The fact that the concrete-elements doesn?t fit and that damage occurs during assembly is a highly topical issue even though we now have methods and systems that make this high-intensity construction possible. Through this report we want to highlight the problems that cause the dimensional and tolerance problems and give suggestions on how to come to terms with these.

Bachelor thesis, Controller, Program of Master of Science in Business and Economics, School of Business and Economics at Linneaus University in Växjö, Sweden, Course Code: 2FE13E:3, Spring 2012 Authors: Jacob Cedergren, Adam Pettersson, Hampus SkelterwijkSupervisor: Anders JerrelingTitle: The ERP-systems impact of the management control - a case study of VIDA AB Original Title: Affärssystemens påverkan på ekonomistyrningen - en fallstudie på VIDA ABBackground: New technology has given businesses new opportunities to use and store information and the current information systems has changed the way of working in more or less all sectors and operations. ERP-systems have been one of the most important IT innovations in the past decade. The potential of a properly implemented ERP-system is great because it has got the ability to link the company?s different areas together. Despite its many advantages, there are several examples of cases where the acquisition and implementation has been a total failure.

Due to recent legal enactments regarding carbon dioxide emissions, the car industry is facing higher demands. An effective way of reducing these emissions is to minimize the weight of the vehicle. This thesis constitutes a feasibility study on whether or not it is applicable for the car industry to utilize an inner floor structure comprising composite materials. The principal was the projectSåNätt, in which the main participant was Volvo Cars Corp. In consultation with a reference group, consisting of delegates from the industry and KTH, a specification of requirements was produced.

The purpose of this paper is to present and analyze the yearly expenses for Swedish rental apartments during the period 1999 to 2007. At the end, it will give the reader a general picture of how the cost-level has fluctuated depending on the production year when the apartment building was finished, and where the same building is located. This paper has the following questions as a starting point:- Can there be an identification of regions depending on where people tend to favor renting an apartment?- How are those regions distributed? That is, where are the cost-levels of the yearly rental expenses highest and where are the levels lowest?Nine statistical surveys from the Swedish government agency Statistics Sweden (Statistiska Centralbyrån) have been used as primary sources for this paper. These surveys deal with price pictures of housing in general, but for this paper the only information that has been used is the one about rental apartments.

Syfte: Syftet med denna systematiska ?versiktsartikel var att unders?ka evidensen f?r om intag av bl?b?r har en effekt p? blodlipider m?tt som HDL och LDL hos vuxna med metabola syndromet. Metod: Litteraturs?kningar genomf?rdes i databaserna Scopus och PubMed den 23 mars 2023. S?kningen baserades p? tre stycken block. Ett block inkluderade de olika typerna av blodfetter, det andra blocket inkluderade randomiserade kontrollerade studier (RCT) och det tredje blocket inkluderade bl?b?r.

In an attempt to prevent ground damage and to reduce harvesting costs, StoraEnso's districts Värmbodal and Fryken, selected a number of final felling areas where the base roads have been marked by planners in the districts. The parties involved in the experiment are mainly planners, harvester operators and forwarder operators. The purpose of this paper is to determine the findings of this trial and to find cost savings or lost revenue. This has been done with a sample of interviews from the involved parties who logged the chosen felling areas. Literature about the interview process has been used to facilitate data collection, interpretation and analysis of the material. If we look at profitability based on assumed income and expenditure, revenue per MWh would be 63 SEK.

Most people have been forced to throw away a pot-plant after its death. There are many reasons to the death of a plant, but mainly it?s because its owner forgets it, and therefore fails to water it. The purpose of this project is therefore to develop a product which can prevent this from happening, while the product has to have a low manufacturing cost to be able to compete whit other, similar, products on the market. During the project, a benchmarking has been done to give a clear picture of what the product has to compete with. The directives there are for CE-marking, and which of these who concerns the product has also been looked up.