The increasing complexity in the development of a configurable real-time system has emerged new principles of software techniques, such as aspect-oriented software development and component-based software development. These techniques allow encapsulation of the system's crosscutting concerns and increase the modularity of the software. The properties of a component that influences the systems performance or semantics are specified separately in entities called aspects, while basic functionality of the property still remains in the component. When building a real-time system, different sets of configurations of aspects and components can be combined, resulting in different configurations of the system. The temporal behavior of the system changes and a way to ensure the predictability of the system is needed.

Sekretessbelagd.

The examination has been performed at Bjerking AB, which is an architectural and engineering company. Bjerking AB has the ambition to be a member of Green Building.The Green Building program developed in year 2005 by The European Commission, the program is an environmental system with the aim to improving energy efficiency within the sectors of non-residential buildings. The minimum requirements to participate the program are following: in new-built buildings the calculated energy consumption must be 25 % lower than the requirements in the BBR (Building regulations) and in refurbishment the reduction must be 25 % lower than before the optimization.The aim of this study has been to examine and review the company Bjerking AB's energy efficiency work in the project of building the school/kindergarten S:ta Maria Alsike, where the goal is to get this building Green Building classed. A description of requirements to become a member of the Green Building has also accomplished in the thesis.The methods performed in this study are literature review, searches on the Internet, studies on the project database for facts/values, calculation of energy consumption and interviews of members of the Green Building. The following issues have been dealt with in the report;-          Did the building in the project manage the requirement to achieve an   energy consumption that is 25% lower than the requirements in BBR?-          What technical measures/system was selected in the building?-          What kind of cooperation was the project based on?-          What is required for consultancy companies and real estate owners to become members of the Green Building?The study of the project and calculation of estimated energy consumption in the building, give the result 47 kWh/m2, year.

This report describes the construction process and the aspects that should be taken into consideration. It includes models of decision and how these can be used in practice. Planning of a building project is very important for a successful execution. This will be the foundation of problems that will occur during the production. In the planning process people with different positions, search for the best suitable building methods.

In this report listed buildings, according to the Swedish Heritage Conservation Act, have been studied with a focus on cases where economical compensation has been given to the owner of the building and cases where the listing of the building has been appealed by the owner. In order for a building to become listed it needs to be particularly valuable from a cultural and historical standpoint. The listed buildings are protected through a list of regulations that determines which parts of the building can or cannot be changed, what methods and materials should be used for changes and repairs, and how the building should be maintained. These regulations should as far as possible be formulated in agreement with the owner, but a building can become listed against the owners will. To decrease the damage this causes the owner he can in some cases have the right to economical compensation. There is also a possibility for the owner to appeal the listing of the building.

This report is about planning a demolition. The purpose of this report is that it should become a base for a demolition of house J at the Academic hospital in Uppsala, and also to make general help for planning a demolition. This report also contains a part about how a change in the work environment affects general people. The work started with studies of literature and design of the general part of the report and then continued with a practical study of house J. From the experience of the first two parts of the report a general help for planning a demolition was shaped.

AbstractMaster thesis of one year in Business Administration, Swedish Business School at Örebro university,Marketing, HT 2011.Authors: Grunér, Linus and Malm, Ludwig Tutor:Pia Lindell Title:Brand building and creating relationships ? A study of a small business in the B2B market Keywords:Brand building, business relationships, SME, B2B. Problem:How does a small business in the B2B market work with brand building and creating relationships? What critical factors can be identified regarding the process of relationship-building and brand building within the context of a small business in the B2B market? Research objective:The purpose of this study is to use existing research to create understanding for how a company in the B2B market is working with relationship-building and brand building. The study also aims to identify any critical factors concerning the process of relationship-building and brand building.

This examination paper is about diseases of rats. The examination paper also includes sampling techniques, administration techniques and radiography. A detailed account of diseases of rats and their symptoms has been included. This examination paper is primarily written for veterinary technicians but also for others with interest in the subject. .

The building industry are currently going through a huge alteration. The introduction of BIM (Building Information Modeling). Which also implements a lot of new ways of solving problems that building modeling can cause. This report is written for Uppsala University in cooperation with Temagruppen in Uppsala. However, it contains a comparison between two different systems that checks building models.

This report describes a thesis done at the Jönköping University of Technology. The aim of this thesis was to create conditions to optimize an existing automatic electrostatic coating system by changing the technology for dispensing lacquer. To select the technology, a study of different dispensing techniques carried out which concluded that the piezoelectric membrane and electrostatic atomization are the most interesting techniques.In order to perform tests with dispensing techniques a demonstrator has been optimized. The controller and PC software of the demonstrator has been programmed to be able to send out PWM signals that control the dispensers. An adapter card was designed to control the piezoelectric membrane and a steering link to the electrostatic atomization has been developed for PWM signals up to 500V.The work has laid ground for a demonstrator where further testing of the dispensing technologies can be performed..

The main purpose of this essay is to analyze the late medieval shirt found in the cathedral of Lund. It has been preserved in the church and later on exhibited in the museum of Lunds cathedral. The most interesting thing about this shirt is probably its close connection to the secular world, as well as to the church. At first sight it appears to be a liturgical garment, it seams to be far too big for a regular, profane smock or shirt, but in a letter received by the church of Lund from Christian I of Denmark this shirt is mentioned as a chemise, or smock. The questions I aim to answer on the following pages goes, what characterizes the chemise or smock? What characterizes the mass shirt or alba? How can you use this type of analyse to examine the shirt from the cathedral of Lund?.

In this report listed buildings, according to the Swedish Heritage Conservation Act, have been studied with a focus on cases where economical compensation has been given to the owner of the building and cases where the listing of the building has been appealed by the owner. In order for a building to become listed it needs to be particularly valuable from a cultural and historical standpoint. The listed buildings are protected through a list of regulations that determines which parts of the building can or cannot be changed, what methods and materials should be used for changes and repairs, and how the building should be maintained. These regulations should as far as possible be formulated in agreement with the owner, but a building can become listed against the owners will. To decrease the damage this causes the owner he can in some cases have the right to economical compensation. There is also a possibility for the owner to appeal the listing of the building.

This study focuses on why people not longer want to be a part of a religious communion they have earlier been a part of. To examine this I have made seven interviews with people who have left their previous communions. Together with the methodological and theoretical discussions on discourse analysis, Richard Jenkins discussions on identity and theories concerning the post-modern society, I have made an analysis on how these people consider their previous communions and its members. They refer i.e. to the social control, the ?closed? culture and the non-questioning-culture that constitute the communions and its techniques.

The development of applications for mobile devices has exploded in recent times. This has also led to the introduction of several new mobile operating systems. To streamline application development for multiple platforms, techniques have been developed to be able to reuse the same application regardless of the operating system. If the same application can be used on multiple platforms it will save both a lot of time and money. Today there are three types of techniques to develop an application; web, hybrid and native application, where the latter is specific to the operating system it has been developed to.

Lining techniques such as nap bonding and mist lining were developed in the late 20th century and have gained popularity alongside with the increased use of acrylic emulsions as adhesives. The ability of the adhesive to create a nap bond to the canvases without penetrating the fibers has shown advantages regarding reversibility. In addition, the use of moisture, heat and pressure is reduced, which can be advantageous for more sensitive paintings. These lining techniques have been included in several studies where reversibility, minimal intervention and respect for the individual requirements and problems of each object have been the focus. The adaptability of the methods has been confirmed and to further explore the adaptability, this study consists of three simpler application techniques with the adhesive Lascaux 303 HV on mockups.