AimThe aim of this study was to map the injury panorama of traumatic injuries related to ice hockey in Sweden 2006-2011. In addition to that the aim was to compare whether there were any gender differences regarding traumatic ice hockey injuries. MethodThe present study was based on data from the Folksam insurance company between 2006 and 2011. The population consisted of ice hockey players in a club affiliated to the Swedish Ice Hockey Federation and that had sustained a traumatic injury related to ice hockey that resulted in medical care and then was reported to Folksam. The results are presented with descriptive statistics such as mean and standard deviation, median range and frequencies. ResultsThe head was the most common injury localization followed by the upper extremity where the shoulder accounted for a high number of injuries. Fracture was the most common type of injury for both male and female players.

Severe floods caused by heavy autumn rains in year 2000 raised the question whether measures to reduce the damage from high water levels, in the area surrounding lake Glafsfjorden and along the river Byälven down to lake Vänern, are possible. One option is to reduce flow resistance along the river and thereby lower the maximum water level a given inflow would cause. Good knowledge of hydraulic and hydrological conditions is necessary in order to estimate the effect of such flow-reducing measures. In order to quantify such effect a 1-dimensional hydraulic flow model has been set up for the river Byälven using the software package MIKE 11. The model is more detailed, especially concerning topography and bathymetry, than earlier models used for studies of the river.

AimThe aim of this study was to map the injury panorama of traumatic injuries related to ice hockey in Sweden 2006-2011. In addition to that the aim was to compare whether there were any gender differences regarding traumatic ice hockey injuries. MethodThe present study was based on data from the Folksam insurance company between 2006 and 2011. The population consisted of ice hockey players in a club affiliated to the Swedish Ice Hockey Federation and that had sustained a traumatic injury related to ice hockey that resulted in medical care and then was reported to Folksam. The results are presented with descriptive statistics such as mean and standard deviation, median range and frequencies. ResultsThe head was the most common injury localization followed by the upper extremity where the shoulder accounted for a high number of injuries. Fracture was the most common type of injury for both male and female players.

Abstract The purpose of this project is to develop a modular processor card which is intended to work as a platform for Kitron Development Karlskoga. The modular processor card is meant to be used as a control system in development projects, mainly in medical and industrial products. The processor card will consist of a central unit with the basic functions for a control system. Furthermore there will be complete modules with machine commodity and programming, to pick exactly the necessary functions for a specific application. With consideration to the specification of the development and the main unit, I chose an adequate microprocessor (AT90CAN32) as core and interface circuits to stated border areas. The construction is first completed in the program MultiSim and then remade in the program OrCAD Capture. The programming language C was used in the software model.

In this work, a method was developed and evaluated for calculating the life of welds under the influence of fatigue loads from a vibration environment. Typically, a shaker table is used for testing a component against vibration loads. The shaker table creates a vibration environment that is defined in the frequency domain by a power spectrum.Similarly, a virtual vibration table can be used to calculate the same type of load environment, which can then be used to calculate the expected lifetime. The benefit of this method is that it can be used in design, as well as in simulation of tests before physical verification tests are carried out.Today there are methods for calculating fatigue life of non-welded base material, but since many components contain welded joints, there is a need to apply this method to those types as well. To achieve this, the thesis combines two different areas, which together provide a method for fatigue assessment of welds using a virtual shaker table.The methodology is carried out by modeling the component, and its welded joints, in a finite element program.

Background: Abortion implies that the pregnancy is interrupted. According to the World Health Organization approximately 46 million induced abortions are carried out each year. Different methods of abortion can be used such as medical and surgical methods. The medical method especially affects a nurse?s experience of the procedure.

In this report I will describe how an art-directed fluid effect for motion picture can be achieved. This effect will be an explosion with a visual style that is congruent with Pixar's movie Up. To begin with I will analyze the visual components that are used in Up and control the fluid simulation to get the desired visual style. I will briefly explain the background of my thesis, why it is interesting to create designed effects and why it is hard to design fluid effects. In the method I will explain my work process and some of the challenges that arises.

The audiologists´ knowledge-domain is generally described as a unique combination of medical, technical, social and behavioural sciences. It gives prominence to the importance of an adequate education relating to the knowledge-demands the students´encounter during their trainee-period. However, an important question is if the educational content corresponds to the knowledge-demands during the training? Aim: This study aimed to identify the knowledge-demands of students during their trainee-period. Furthermore, to identify how the students´ actual knowledge was related to the encountered knowledge-demands.

It is important to know what is normal in the wound healing process in order to determine what happens when a wound does not heal as expected. If the amount of bacteria in the wound gets too large the body will not be able to defend itself and it becomes an infection. Colonization and infection are common elements in wound management and it is often the veterinary nurse role to deal with wounds in a proper manner. Antibiotics are drugs that either kill or inhibit the multiplication of bacteria or fungi, and have been in veterinary medicine for approximately 60 years. Very few new antibiotics are introduced and increased resistance is a major problem that requires everyone to take responsibility to reduce the use of it.

Background: A group severely affected by health issues, the experiences of homeless alcohol and drug abusers in the coverage of their medical care needs is not satisfactory. Aim: The aim of the study is to explore which factors experienced by homeless alcohol and drug abusers in Uppsala in regards to their living situation affected their health, their perception of access to healthcare, the character of treatment received and coping strategies used outside of the healthcare system. Method: Nine people who had experienced both homelessness and substance abuse problem were recruited for the study during their visit to Stadsmissionens facilities for the homeless. Data was collected through qualitative, semi-structured interviews including two women and seven men. Data was analyzed using qualitative content analysis according to Giorgi modified by Malterud.Results: Among homeless substance abusers interviewed experiences of unwelcoming and prejudiced healthcare were described.

This report covers the conceptual design of a new one person hybrid vehicle that is to be fast and convenient to drive on the roads. The vehicle is most of all supposed to be used as a commute vehicle but can also be used at other occasions as well.During the work with this project the group has focused on three larger areas, the outer design (body), wheel chassis and an ergonomically designed interior. The group was not able to just create these parts in 3D to get a trustworthy vehicle, hence number of other components and details were also created to get a better entirety.The outer design starts with idea generation and sketches and ends with a 3D model which is rendered to show how the final product is going to look. The design of the body has been going on during the entire work process due to new ideas and improvements that seemed interesting and had to be changed.The wheel chassis also started with idea generation, research and sketches. It ended up with a simulated 3D model which later on was mounted on the vehicle body to show how the vehicle is going to perform during usage.

This paper presents a study of the computer game ?Minesweeper?. The aim of the game is to search through a rectangular area of mined squares without hitting any mines. By using a strategy based on making every operation as safe as possible, series of the game have been simulated. The size of the playground is four times four squares.

Introduction: A big part of the patients that recently has gone through operation at surgical units experiences pain in different scales after their operation. Untreated postoperative pain has been proved in different studies to increase to risk medical complications, longer rehabilitation, more days at the hospital and higher expenses for the hospital. One of the nurses? main tasks is to notice and relieve the pain of the patients. To engage the patients more in the medical process and make the nurses´ work more person-centered could make an impact on the postoperative pain and contribute to a better pain relief.

As an effect of increased living standards and improved health care, life expectancy has risen in many parts of the world. At the same time, welfare diseases such as diabetes and obesity increases. As the number of elderly and long-term sick rises, so will the medical care needs. E-health applications are often presented as a way to meet future medical and doing so within the scope of existing resources. By facilitating health communication and widen access to health services by offering them online, e-health applications encourages people to become more engaged in their own health, thus working proactively towards a healthier population.

Det finns en rad satt att beskriva gallringsformen. Ofta används begreppet gallringskvot i dessa sammanhang utan att närmare ange vilken metod eller definition som använts for att beräkna den. Detta kan lätt leda till att missuppfattningar uppstår. Denna studie belyser olika definitioners känslighet for bland annat beståndsstruktur, gallringsform och stickvägsavstånd. Studien innehåller dessutom en jämforelse mellan olika metoder att mäta och uppskatta gallringskvoten i ett bestånd.