An open fitting is suitable for persons with sloping hearing loss and relatively good low fre-quency hearing. Sensory neural hearing losses often have this type of configuration. A large ventilation canal gives a greater feeling of comfort and less occlusion. The purpose of this study was to look at the hearing aid benefit of open fitted hearing aids. Self report question-naires were sent out to 102 patients who were given ReSound AIR during the year of 2006 in Uddevalla.

Foreign invested SMEs have recently become increasingly interested in China. The enterprises are in this report categorized as second wave companies since they follow the footsteps of previous pioneers, of which mostly were larger companies. The ambitions of the SMEs are either to sell products on the ever expanding Chinese market or to utilize the potential of low cost production for global markets. The existing literature is fragmented and solely based on the experience of larger companies. We believe that SMEs are facing new and different challenges, and thus a new generic theoretical frame work is desirable.

I detta arbete har energisimuleringsprogrammet IDA ICE utvärderats genom att simuleringar gjorda i detta program jämförts med simuleringar gjorda i CFD-programmet ANSYS Fluent. Modeller i form av ett kvadratiskt kontorsrum med fönster ställdes upp för ett basfall i de båda programmen och parametern operativ temperatur jämfördes. För att se hur förändringar i modellerna påverkade resultatet ställdes ett antal nya fall upp där olika parametrar varierades. Variablerna som en i taget ändrades vid uppställningar av nya simuleringsfall var: rumshöjd, U-värde på fönstret, deplacerande istället för omblandande ventilation, radiator istället för golvvärme, tilluftstemperatur, mätpunktens placering samt hur till-och frånluftsdonen placerades. Resultatet av simuleringarna visade att den operativa temperaturen höll sig på en relativt konstant nivå för de olika fallen i IDA ICE, medan värdet på denna parameter varierade för de olika fallen vid CFD-simuleringarna.

Sövning av kaniner är förenat med stora risker och säkra alternativ till inhalationsanestesi behöver utvecklas. I denna studie utvärderades intravenös anestesi med midazolam och sufentanil, för induktion och underhåll, på åtta New Zeeland White-kaniner av honkön. Samtliga kaniner premedicinerades med medetomidin i låg dos. Narkosen inducerades intravenöst med en blandning av midazolam och sufentanil (medeldos 0,09 mg/kg midazolam och 0,48 µg/kg sufentanil). Kaninerna hölls därefter sövda i 60 minuter via kontinuerlig infusion av samma blandning (medeldos 0,13 mg/kg/h midazolam och 0,72 µg/kg/h sufentanil).

There is two dairy farms in Sweden with ability to be opened on both long sides, one outside Hjo and the other one, Brandstadholm, north of Sjöbo. When there is no measures and results or not enough literature about natural ventilation and especially on this kind of air inlet, makes my tests very interesting not only on Alnarp, but among other companies. I would like to find out if there is any air movements direct on the cows, how high/low temperature, air humidity, light intensity and noise standard inside the barn. Does Brandstadholm fulfil the rules and regulations when it comes to climate inside the barn? Could this system become the new dairy barn instead of the conventional barns in Sweden? I am going to focus on the animals environment, after all they are the one who is going to spend the most of the time in the barn. I used five electrical loggers distributed inside the barn to measure the temperature and one of the loggers measured the air humidity, every 15th minute. One logger were placed on the outside which measured both temperature and air humidity.

Syftet med denna studie är att undersöka vilka likheter och skillnader i undervisningen som finns mellan en grundsärskoleklass och en grundskoleklass. Undersökningens metod är strukturerade observationer genomförda av två observatörer i en grundskoleklass och i en särskoleklass på samma skola. Olika aspekter av undervisningen observerades, av vilka några kan anses utgöra förutsättningar för en inkluderande undervisning. Dessa är: samarbete mellan pedagoger i undervisningen, ledarskapsmodeller, cooperativt lärande (samarbetsinlärning), dynamisk pedagogik samt samarbete mellan pedagoger i problemlösande undervisning. Resultatet visar på likhet mellan de båda skolformerna beträffande användandet av en organismisk modell med ett demokratiskt ledarskap, där grundsärskolans pedagoger endast använder det aningen mer frekvent än grundskolans pedagoger.

Tail-biting in pigs is an animal welfare issue and in Sweden during 2002 the producers lost tree million Swedish crowns because of tail biting. This economic loss depends on the pigs which are discarded at slaughter because of tail biting. Tail biting can be separated into two stages, "pre-injury" and "injury". The aim of this study is to investigate if tail biting depends on environment or genetic background.A lot of research on the environments effects on the behaviour of pigs but not so much on the genetic effects has been performed. The frequency of tail biting in pig farms influence among others of environment enrichment, ventilation, gender and breed of the pig.

The purpose of this work is to design and construct a device able to measure the mechanical attrition of oxygen carrier particles. Those particles are used in chemical looping combustion and in the present situation there is a lack of knowledge in how the attrition process work and in which extension. To find already tested solutions trying to answering this problem a literature study wascarried out and the best solution found was the so called Grace-Davison Jet-Cup method. This method is supposed to emulate the attrition caused by a cyclone separator and its advantages are that it is possible to use small test amounts, 5-10 g, and a thirty minutes long test will be enough to acquire useable results. An device was designed based on the Jet-Cup method with some slight modifications.

Mechanical harvesting may result in timber damages leading to reduced saw log quality. The initiator of this study was VIDA ? a privately owned concern operating in the value-adding process industry of forest raw materials. The aim of this study was to examine the type and amount of damages on Alvestakubb caused by the harvester head during the cutting process. The aim was also to compare the damages caused by different types of feed rollers and to evaluate the effects of temperature on damage occurrence.

Bakgrund:Tuberkulos är den andra ledande dödsorsaken i världen. Värst drabbade områden är södra Afrika, sydöstra Asien och Ryssland. Incidensen i Sverige ökar. Patienter med tuberkulos kräver mycket omvårdnad. Omvårdnad är sjuksköterskans profession.

This report is a bachelor thesis work within the field of Product Development and is also an assignment for Thule Sweden. The work has been performed by Niclas Tjäderborn and Christian Holm, students at the Mechanical Engineering Program with major in Product Development and Industrial Design at Jönköping School of Engineering during spring the semester of 2009.The thesis work concerned the development of a new wheel holder for bike carrier for Thule Sweden. The background to the project was that the initiator wanted a more user friendly wheel holder with better design than those available on the market. The wheel holder is able to be implemented on one or several of Thule?s current wheel holders.

This report describes the planning and the accomplishment of the final diploma workat the study program Mechanical Engineering, Department of Engineering Sciences, Uppsala University. Two students carried out the diploma work at GE HealthcareHusbyborg in Uppsala.The aim of the diploma work was to develop and improve existing processequipment for 11C-radiochemistry in PET. The process equipment was to be dividedinto smaller independent modules to make it more flexible. Part of the existingprocess equipment is an oven that is supposed to perform a specific chemicalreaction. One of the main goals was to study and improve this oven.The work could be divided into three main phases: 1.Present concepts for one module, and interface between different modules.

This report is the result of a thesis at the company Sanmina in O?rnsko?ldsvik. The thesis is the final work at the mechanical engineering program at Umea? University.Sanmina has in 2015 launched an initiative to ensure that all sites are using LEAN principles and tools to enhance their business. As part of the plan for the LEAN-work, an LSS (Lean Six Sigma)-project has started to study the company's receivehall and inspection.

This thesis was performed at Vendig AB which is a company that develops and sells products such as belt scrapers for conveyor. The thesis is divided into two parts, one part where it´s investigated which tension force is required to tighten Vendig AB´s scraper Hampus against the belt in a correct way. The second part is called mechanical design and here a new and more compact tension device is developed.Field studies has been conducted at a couple of Vendig AB´s costumers to get a knowledge base about how Vendig AB´s products are used, how they function and the environment they operate in. During one of the field studies the force between the scraper and the belt was measured. The result from the measurements, together with a report from LKAB [1], were evaluated and summarized in a table.

This project was aimed to study the degradation of polystyrene-butadiene-styrene block copolymer (SBS). SBS is used to modify bitumen, the binder in asphalt. From earlier studies it is known that SBS degrades in bitumen, but the degradation products have not been identified. To be able to determine the long term effects of SBS in the environment, degradation products need to be identified. Polystyrene forms rigid blocks with polybutadiene as a rubbery matrix between the ridgid blocks.